Abstract
Ceramic coatings were deposited on 2A12 aluminum alloys using micro-arc oxidation (MAO) technology in CH3COONa-Na2WO4 electrolyte. The MAO process was studied by recording the current-time curve. The influences of Na2WO4 concentrations on the coatings in CH3COONa electrolyte were investigated. The results show that the Na2WO4 concentrations affect the MAO process and performances of the coatings directly. Na2WO4 in excess is harmful for the formation of Al2O3 in this electrolyte. The corrosion resistance was enhanced with the decrease of Na2WO4 concentration.
Similar content being viewed by others
References
H.Y. Ding, Z.D. Dai, S.C. Skuiry, and D. Hui, Corrosion Wear Behaviors of Micro-Arc Oxidation Coating of Al2O3 on 2024 Al in Different Aqueous Environments at Fretting Contact, Tribol. Int. Tribol. Int., 2010, 43, p 868–875
X.H. Wua, W. Qin, Y. Guo, and Z.Y. Xie, Self-Lubricative Coating Grown by Micro-plasma Oxidation on Aluminum Alloys in the Solution of Aluminate-Graphite, Appl. Surf. Sci., 2008, 254, p 6395–6399
A.L. Yerokhin, V.V. Lyubimov, and R.V. Ashitkov, Phase Formation in Ceramic Coatings During Plasma Electrolytic Oxidation of Aluminium Alloys, Ceram. Int., 1998, 24, p 1–6
M.M.S.Al. Bosta and K.J. Ma, Influence of Electrolyte Temperature on Properties and Infrared Emissivity of MAO Ceramic Coating on 6061 Aluminum Alloy, Infrared Phys. Technol., 2014, 67, p 63–72
M.M.S.Al. Bosta,.K.J. Ma, and H.H. Chien, The Effect of MAO Processing Time on Surface Properties and Low Temperature Infrared Emissivity of Ceramic Coating on Aluminium 6061 Alloy, Infrared Phys. Technol., 2013, 60, p 323–334
I. Shchedrina, A.G. Rakoch, G. Henriona, and J. Martin, Non-destructive Methods to Control the Properties of MAO Coatings on the Surface of 2024 Aluminium Alloy, Surf. Coat. Technol., 2014, 238, p 27–44
S.V. Gnedenkov, O.A. Khrisanfova, A.G. Zavidnaya, S.L. Sinebrukhov, P.S. Gordienko, S. Iwatsubo, and A. Matsui, Composition and Adhesion of Protective Coatings on Aluminum, Surf. Coat. Technol., 2001, 145, p 146–151
S.G. Xin, L.X. Song, R.G. Zhao, and X.F. Hu, Influence of Cathodic Current on Composition, Structure and Properties of Al2O3 Coatings on Aluminum Alloy Prepared by Micro-Arc Oxidation Process, Thin Solid Films, 2006, 515, p 326–332
X. Nie, E.I. Meletis, J.C. Jiang, A. Leyland, A.L. Yerokhin, and A. Matthews, Abrasive Wear Corrosion Properties and TEM Analysis of Al2O3 Coatings Fabricated Using Plasma Electrolysis, Surf. Coat. Technol., 2002, 149, p 245–251
A.M. Kumar, S.H. Kwon, H.C. Jung, and K.S. Shin, Corrosion Protection Performance of Single and Dual Plasma Electrolytic Oxidation (PEO) Coating for Aerospace Applications, Mater. Chem. Phys., 2015, 149-150, p 480–486
F.T. Xu, Y. Xia, and G. Li, The Mechanism of PEO Process on Al-Si Alloys with the Bulk Primary Silicon, Appl. Surf. Sci., 2009, 255, p 9531–9538
A. Ghasemi, V.S. Raja, C. Blawert, W. Dietzel, and K.U. Kainer, The Role of Anions in the Formation and Corrosion Resistance of the Plasma Electrolytic Oxidation Coatings, Surf. Coat. Technol., 2010, 204, p 1469–1478
K. Li, W.F. Li, G.G. Zhang, and P. Guo, Preparation of Black PEO Layers on AleSi Alloy and the Colorizing Analysis, Vacuum, 2015, 111, p 131–136
H.Y. Zheng, Y.K. Wang, B.S. Li, and G.R. Han, The Effects of Na2WO4 Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy, Mater. Lett., 2005, 59, p 139–142
C.C. Tseng, J.L. Lee, T.H. Kuo, S.N. Kuo, and K.H. Tseng, The Influence of Sodium Tungstate Concentration and Anodizing Conditions on Microarc Oxidation (MAO) Coatings for Aluminum Alloy, Surf. Coat. Technol., 2012, 206, p 3437–3443
B.L. Jiang, R.B. Zhao, G. Liang, J.M. Li, and F. Yuan, Effect of Na2WO4 on Properties of Micro-Arc Oxidation (MAO) Ceramic Coatings and Wear Resistance of Aluminum Alloy, Mater. Rev., 2006, 20, p 155
A.L. Yerokhi, X. Nie, A. Leyland, A. Matthews, and S.J. Dowey, Plasma Electrolysis for Surface Engineering, Surf. Coat. Technol., 1999, 122, p 73–93
G.L. Yang, X.Y. Lu, Y.Z. Bai, H.F. Cui, and Z.S. Jin, The Effects of Current Density on the Phase Composition and Microstructure Properties of Micro-Arc Oxidation Coating, J. Alloys Compd., 2002, 345, p 196–200
L. Wen, Y.M. Wang, Y. Zhou, J.H. Ouyang, L.X. Guo, and D.C. Jia, Corrosion Evaluation of Microarc Oxidation Coatings Formed on 2024 Aluminium Alloy, Corros. Sci., 2010, 52, p 2687–2696
B.J. Zheng, Y. Zhao, W.B. Xue, and H.F. Liu, Microbial Influenced Corrosion Behavior of Micro-Arc Oxidation Coating on AA2024, Surf. Coat. Technol., 2013, 216, p 100–105
Acknowledgment
This work is part of a research program financed by the Development Project of Science and Technology of Shandong Province (Project No. 2010GSF10627) and Science and Technology Supporting System Item of Resource-conserving Society of Shandong Province (Project No. 2007JY05).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Lin, Z., Yu, H., He, S. et al. Effect of Na2WO4 on Growth Process and Corrosion Resistance of Micro-arc Oxidation Coatings on 2A12 Aluminum Alloys in CH3COONa Electrolyte. J. of Materi Eng and Perform 25, 297–303 (2016). https://doi.org/10.1007/s11665-015-1803-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-015-1803-8