Abstract
The effects of the via etching process as well as the postclean treatment (PCT) on the electrical performance of vias were studied. Stress-migration (SM) tests were carried out to investigate the effect of temperature. Both the thermal and electrical factors were assessed in the wafer-level conventional electromigration (EM) tests. Our results showed that the removal of the TiN antireflection coating (ARC) layer during via etch results in lower initial via resistance, higher resistance to SM, and longer EM lifetime. On the other hand, with additional PCT, the initial via resistance and SM resistance became worse. The CxFy residues1 induced by the PCT step remain at the bottom of the via and degrade the interface properties. However, the EM lifetime seems to be unaffected by these residues. The better EM performance might be related to the removal of the TiOxNy layer by the PCT step.
Similar content being viewed by others
References
C.N. Ho, G. Higelin, C.H. Low, A. See, L. Chan, and D.H.C. Chua (Paper presented at 196th Joint International Meeting of the Electrochemical Society, 1999).
F. Fracassi, R. d'Agostino, R. Lamendola, and I. Mangieri, J. Vac. Sci. Technol. A 13(2)., 1995, pp. 335–342.
C.A. Martin and J.W. McPherson, VMIC Conf. (1989), pp. 168–175.
J.R. Lloyd, Mater. Res. Soc. Symp. Proc. 391, 231 (1995).
L.M. Ting, G. Dixit, M. Jain, K.A. Littau, H. Tran, M. Chang, and A. Sinha, Mater. Res. Soc. Symp. Proc. 391, 453 (1995).
L. J. Belliott, T. Spooner, J.H. Rose, and R. Shuman, Mater. Res. Soc. Symp. Proc. 391, 459 (1995).
C.D. Graas, H.A. Le, J.W. McPherson, and R.H. Havemann, IEEE-Int. Symp. on Reliability Physics (IRPS) (1994), pp. 173–177.
Y.H. Lee, K. Wu, N. Mickie, I.J. Ma, and S. Hui, Via Delamination—A Novel Electromigration Failure Mechanism (IEEE/IRPS, 1997), pp. 206–210.
http://www.dupont.com/cgi-bin/corp/proddbx.cgi
C.D. Graas, H.A. Le, and T.A. Rost, Correlations between Initial Via Resistance and Reliability Performance (IEEE/IRPS, 1997), pp. 44–48.
Low Wye Boon (EEE Master's thesis, Nanyang Technological University, 2000).
M. Small, D. Crook, E. Nikkel, and D. Buck, Analysis of Stress-Driven Delamination in Contact Vias (SPIE, 1995), vol. 2874, pp. 248–259.
Y. Inoue, S. Tanimoto, K. Tsujimura, T. Yamashita, Y. Ibara, Y. Yamashita, and K. Yoneda, J. Electrochem. Soc. 141, 1056 (1994).
J.A. Walls, IEEE Electron Dev. Lett. 16 430 (1995).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ho, C.N., Lim, Y.K., Gerald, H. et al. Effect of via etching process and postclean treatment on via electrical performance. J. Electron. Mater. 30, 1595–1601 (2001). https://doi.org/10.1007/s11664-001-0178-9
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11664-001-0178-9