Abstract
Effects of different holding time on CBN/Cu-Sn-Ti composites have been thoroughly documented. It is revealed that adequate wetting can only take place at 30 minutes and beyond. The thickness of reaction layer is governed by Ti diffusion, and follows a parabolic growth rate until Ti is fully consumed at the compensation of interfacial reactions. Concurrently, more stable Cu3Sn1 has been generated due to the decomposition of unstable Cu41Sn11, which leads to an enhanced wear performance.
References
[1] J.M. Fernandez, R. Asthana, M. Singh and F.M. Valera, Ceram. Int., 2016, vol. 42, pp. 5447-5454.
[2] D.R. Simhan, P. Mukhopadhyay and A. Ghosh, Mater. Lett., 2017, vol. 207, pp. 183-186.
[3] Y. Wang, K. Lei, Y. Ruan and W. Dong, Int. J. Refract. Met. Hard Mater., 2016, vol. 54, pp. 98-103.
[4] K.X. Zhang, W.K. Zhao, F.Q. Zhang and L.L. He, Mater. Sci. Eng. A., 2017, vol. 696, pp. 216-219.
[5] J. Felba, K.P. Friedel, P. Krull, I.L. Pobol and H. Wohlfahrt, Vacuum, 2001, vol. 62, pp. 171-180.
[6] Z.W. Yang, C.L. Wang, Y. Wang, L.X. Zhang, D.P. Wang and J.C. Feng, J. Mater. Sci. Technol., 2017, vol. 33, pp. 1392-1401.
[7] S.F. Huang, H.L. Tsai and S.T. Lin, Mater. Chem. Phys., 2004, vol. 84, pp. 251-258.
[8] W.C. Li, C. Liang and S.T. Lin, Diam. Relat. Mater., 2002, vol. 11, pp. 1366-1373.
[9] S.X. Liu, B. Xiao, Z.Y. Zhang and D.Z. Duan, Int. J. Refract. Met. Hard Mater., 2016, vol. 54, pp. 54-59.
[10] Y. Wang, X.M. Qiu, D.Q. Sun and S.Q. Yin, Int. J. Refract. Met. Hard Mater., 2011, vol. 29, pp. 293-297.
[11] R.J. Miab and A.M. Hadian, Ceram. Int., 2014, vol. 40, pp. 8519-8524.
[12] Y. Fan, J. Fan and C. Wang, Metall. Mater. Trans. B., 2019, vol. 50, pp. 601-606.
[13] A.M. Hadian and R.A.L. Drew, Mater. Sci. Eng. A., 1994, vol. 189, pp. 209-217.
[14] Y.C. Hsieh and S.T. Lin, J. Alloys Compd., 2008, vol. 466, pp. 126-132.
[15] C.C. Lin, R.B. Chen and R.K. Shiue, J. Mater. Sci., 2001, vol. 36, pp. 2145-2150.
[16] R. Nascimento, A. Martinelli and A. Buschinelli, Cerâmica, 2003, vol. 49, pp. 178-198.
[17] Y.V. Naidich, V.S. Zhuravlev, I.I. Gab, B.D. Kostyuk, V.P. Krasovskyy, A.A. Adamovskyy and N.Y. Taranets, J. Eur. Ceram. Soc., 2008, vol. 28, pp. 717-728.
[18] W.C. Li, S.T. Lin and C. Liang, Metall. Mater. Trans. A., 2002, vol. 33A, pp. 2163-2172.
[19] W.F. Ding, J.H. Xu, M. Shen, Y.C. Fu and B. Xiao, Int. J. Refract. Met. Hard Mater., 2006, vol. 24, pp. 432-436.
[20] S. Liu, B. Xiao, H. Xiao, L. Meng, Z. Zhang and H. Wu, Surf. Coat. Technol., 2016, vol. 286, pp. 376-382.
[21] Y. Fan, J. Fan and C. Wang, J. Mater. Sci. Technol., 2019, vol. 35, pp. 2163-2168.
[22] J. Li, K. Hu and Y. Zhou, Acta. Metall. Sin, 2001, vol. 37, pp. 547-550.
[23] W. Zhai, W.L. Wang, D.L. Geng and B. Wei, Acta Mater., 2012, vol. 60, pp. 6518-6527.
[24] M. Li, Z. Du, C. Guo and C. Li, J. Alloys Compd., 2009, vol. 477, pp. 104-117.
[25] G.J. Zhou, Y. Zhou and Y. Luo, AIP Adv., 2017, vol. 7, pp. 5383-5387.
[26] A. Korneva, B. Straumal, A. Kilmametov, L. Lityńska-Dobrzyńska, G. Cios, P. Bała and P. Zięba, Mater. Charact., 2016, vol. 118, pp. 411-416.
[27] X. Liu, S. He and H. Nishikawa, Scr. Mater., 2016, vol. 110, pp. 101-104.
[28] X. Deng, N. Chawla, K.K. Chawla and M. Koopman, Acta Mater., 2004, vol. 52, pp. 4291-4303.
[29] G. Jang, J. Lee and J. Duh, J. Electron. Mater., 2004, vol. 33, pp. 1103-1110.
[30] B. Liu, Y. Tian, J. Feng and C. Wang, J. Mater. Sci., 2017, vol. 52, pp. 1943-1954.
[31] W.F. Ding, J.H. Xu, Z.Z. Chen, Q. Miao and C.Y. Yang, Mater. Sci. Eng. A., 2013, vol. 559, pp. 629–634.
[32] Q.L. Li, H.Z. Ren, W.N. Lei, K. Ding, L. Ding and S.R. Zhang, Int. J. Adv. Manuf. Technol., 2017, vol. 95, pp. 2111-2118.
[33] A. Ghosh and A.K. Chattopadhyay, Int. J. Refract. Met. Hard Mater., 2017, vol. 68, pp. 96-103.
The authors gratefully acknowledge the National Natural Science Foundation of China (51622401, 51861130361, 51861145312, and 51850410522), Newton Advanced Fellowship by Royal Society (RP12G0414), Research Fund for Central Universities (N172502004), Xing Liao Talents Program (XLYC1807024 and XLYC1802024), and Global Talents Recruitment Program endowed by the Chinese Government for their financial support. We would also like to thank State Key Laboratory of Solidification Processing, Northwestern Polytechnical University (SKLSP201805).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted October 28, 2019.
Rights and permissions
About this article
Cite this article
Fan, Y., Fan, J. & Wang, C. Influence of Holding Time on Interfacial Reaction Layer Characteristics and Wear Properties of CBN/Cu-Sn-Ti Composites. Metall Mater Trans B 51, 880–884 (2020). https://doi.org/10.1007/s11663-020-01813-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-020-01813-z