Abstract
This work offers a fresh perspective on buttering, a technique often considered for fusion welding of dissimilar metals. For the first time, buttering was attempted in solid state using friction deposition. Using this new “friction buttering” technique, fusion welding of two different dissimilar metal pairs (austenitic stainless steel/borated stainless steel and Al-Cu-Mg/Al-Zn-Mg-Cu) was successfully demonstrated. The results show that friction buttering can simplify a tough dissimilar welding problem into a routine fusion welding task.
References
C. Jang, J. Lee, J.S. Kim, T.E. Jin: Int. J. Press. Vessels Pip., 2008, vol. 85, pp. 635-646.
C.R. Das, A.K. Bhaduri, G. Srinivasan, V. Shankar, S. Mathew: J. Mater. Process. Technol., 2009, vol. 209, pp. 1428-1435.
R. Puli and G.D. Janaki Ram: Surf. Coat. Technol., 2012, vol. 207, pp. 310-318.
J. Gandra, H. Krohn, R.M. Miranda, P. Vilac¸ L. Quintino, J.F. dos Santos: J. Mater. Process. Technol., 2014, vol. 214, pp. 1062-1093.
J.J.S. Dilip and G.D. Janaki Ram: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 182-192.
G.M. Karthik, S. Panikar, G.D. Janaki Ram, R.S. Kottada: Mater. Sci. Eng. A, 2017, vol. 679, pp. 193-203.
T. Matsumoto, T. Shinoda, H. Miyake, T. Matsuzaka, H. Kanai: Weld. J. Res. Suppl., 1995, pp. 397s–405s.
C.V. Robino and M.J. Cieslak: Weld. J. Res. Suppl., 1997, pp. 11s–23s.
B. Shanmugarajan, J.N. Chary, G. Padmanabham, B. Arivazhagan, S.K. Albert, A.K. Bhaduri: Opt. Lasers Eng., 2013, vol. 51, pp. 1272-1277.
Ramesh Puli and G.D. Janaki Ram: Mater. Charact., 2012, vol. 74, pp. 49-54.
H. Inoue, T. Koseki, S. Ohkita, M. Fuji: Sci. Technol. Weld. Joi., 2000, vol. 5, pp. 385-396.
ASTM A887-89, ASTM International, West Conshohocken, PA, 2014.
J.J.S. Dilip and G.D. Janaki Ram: Mater. Charact., 2013, vol. 86, pp. 146-151.
ASTM B209-10, ASTM International, West Conshohocken, PA, 2010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted December 6, 2016.
Rights and permissions
About this article
Cite this article
Karthik, G.M., Mastanaiah, P., Janaki Ram, G.D. et al. Friction Buttering: A New Technique for Dissimilar Welding. Metall Mater Trans B 48, 1416–1422 (2017). https://doi.org/10.1007/s11663-017-0934-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11663-017-0934-8