Abstract
The age-hardening response for ultrafine-grained, powder-metallurgy-consolidated aluminum 7091 was investigated for the first time. Peak hardening occurred after aging at 353 K (80 °C) for only 4 hours; further aging for up to 26 hours resulted in only slight fluctuations in hardness values. After the 4-hour aging, the precipitate population consists of a high density of nanoscale GP zones (diameter ~3 nm) and nanoscale η′ phase (<30 nm); η phase is not present.
References
M. Nakai and T. Eto: Kabushiki Kaisha Kobe Seiko Sho (Kobe Steel, LTD., Hyogo, JP), US Patent 6048415, United States, 2000.
E. Lavernia, G. Rai, N.J. Grant, Mater. Sci. Eng., 79 (1986) 211–21.
A. Ardell: Metall. Trans. A, 16 (1985) 2131–65.
J. Buha, R.N. Lumley, A.G. Crosky, Mater. Sci. Eng. A, 492 (2008) 1–10.
R. Ferragut, A. Somoza, A. Tolley, Acta Mater., 47 (1999) 4355–64.
G. Sha, A. Cerezo, Acta Mater., 52 (2004) 4503–516.
L.K. Berg, J. Gjonnes, V. Hansen, X.Z. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, L.R. Wallenberg, Acta Mater., 49 (2001) 3443–51.
K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman, E.J. Lavernia, J.M. Schoenung, Acta Mater., 62 (2014) 141–55.
J.L. Petty-Galis, R.D. Goolsby, J. Mater. Sci., 24 (1989) 1439–46.
J.C. Benedyk: Light Met. Age, 2010, pp. 16–22.
J.R. Davis, ASM Speciality Handbook, ASM International, Materials Park, OH, 1993, pp. 784.
S.K. Panigrahi, R. Jayaganthan, Mater. Des., 32 (2011) 3150–60.
H. Chen, K. Tao, B. Yang, J. Zhang, Trans. Nonferrous Met. Soc China, 19 (2009) 1110–15.
Y.H. Zhao, X.Z. Liao, Y.T. Zhu, R.Z. Valiev, J. Mater. Res., 20 (2005) 288-91.
Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, Y.T. Zhu, Acta Mater., 52 (2004) 4589–99.
Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma, Y.T. Zhu, Adv. Mater., 18 (2006) 2280–83.
Y. Zhao, X. Liao, R.Z. Valiev, Y.T. Zhu, MRS Online Proc. Libr., 821 (2004) p 991-96
D.C.C. Magalhaes, M.F. Hupalo, O.M. Cintho, Mater. Sci. Eng. A, 593 (2014) 1–7.
T. Hu, K. Ma, T.D. Topping, J.M. Schoenung, E.J. Lavernia, Acta Mater., 61 (2013) 2163–78.
J.W. Bohlen, R.J. Kar, G.R. Chanani, in: M.E. Fine, J.E.A. Starke (Eds.) Rapidly Solidified Powder Aluminum Alloys, ASTM STP 890, American Society for Testing and Materials, Philadelphia, PA, 1986, pp. 166–85.
D.B. Witkin, E.J. Lavernia, Prog. Mater. Sci., 51 (2006) 1–60.
E.J. Lavernia, B.Q. Han, J.M. Schoenung, Mater. Sci. Eng. A, 493 (2008) 207–214.
Z. Zhang, S. Dallek, R. Vogt, Y. Li, T.D. Topping, Y. Zhou, J.M. Schoenung, E.J. Lavernia, Metall. Mater. Trans. A, 41 (2010) 532–41.
S.D. Kirchoff, J.Y. Adkins, W.M. Griffith, I.A. Martorell, in: M.E. Fine, E.A. Starke (Eds.) Rapidly Solidified Powder Aluminum Alloys, ASTM STP 890, American Society for Testing and Materials, Philadelphia, PA, 1986, pp. 354–66.
S.V. Emani, J. Benedyk, P. Nash, D. Chen, J. Mater. Sci, 44 (2009) 6384–91.
J.K. Park, A.J. Ardell, Mater. Sci. Eng. A, 114 (1989) 197–203.
E. Donoso, Mater. Sci. Eng., 74 (1985) 39–46.
D. Richard, P. Adler, Metall. Trans. A, 8 (1977) 1177–83.
Y. Li, W. Liu, V. Ortalan, W.F. Li, Z. Zhang, R. Vogt, N.D. Browning, E.J. Lavernia, J.M. Schoenung, Acta Mater., 58 (2010) 1732–40.
K. Ma, J.M. Schoenung, Philos. Mag. Lett., 90 (2010) 739–51.
A. Deschamps, F. De Geuser, Z. Horita, S. Lee, G. Renou, Acta Mater., 66 (2014) 105–17.
R. Ferragut, A. Somoza, A. Dupasquier, J. Phys. Condens. Matter, 8 (1996) 8945.
X.Z. Li, V. Hansen, J. Gjonnes, L.R. Wallenberg, Acta Mater., 47 (1999) 2651-9.
The authors are grateful for the funding provided by the Office of Naval Research (Grant No. ONRN00014-12-1-0237) through Dr. Lawrence Kabacoff as the Program Officer. Henry Meeks and Jonathan Meeks of Advanced Materials and Manufacturing Technologies (Granite Bay, CA) are acknowledged for their technical advice during DMD forging.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted April 15, 2014.
Rights and permissions
About this article
Cite this article
Ma, K., Smith, T., Hu, T. et al. Distinct Hardening Behavior of Ultrafine-Grained Al-Zn-Mg-Cu Alloy. Metall Mater Trans A 45, 4762–4765 (2014). https://doi.org/10.1007/s11661-014-2498-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-014-2498-4