Abstract
Fe83C17 alloy melt can be cast readily into white cast iron. It is brittle, with a compressive strength of ~1300 MPa. By a fluxing technique, a Fe83C17 melt can be quenched into a crystalline solid of ultrafine networklike microstructure, with a hardness value of ~536 HV, a yield strength of ~2000 MPa, and a strain to failure of about 18 pct. In particular, a cube made of Fe83C17 network alloy can be compressed to a disk.
Similar content being viewed by others
Notes
INSTRON is a trademark of Instron, Canton, MA.
TEFLON is a trademark of E.I. duPont de Nemours and Company, Wilmington, DE.
References
M.F. Ashby and D.R.H. Jones: Engineering Materials 2, 3rd ed., Elsevier, Oxford, United Kingdom, 2006, pp. 128–31.
D.R. Askeland: The Science and Engineering of Materials, 3rd ed., PWS Publishing Company, Boston, MA, 1994, pp. 365–73.
C.P. Tabrett, I.R. Sare, and M.R. Ghomashchi: Int. Mater. Rev., 1996, vol. 41, pp. 59–82.
Z. Liu, Y. Li, X. Chen, and K. Hu: Mater. Sci. Eng. A, 2008, vol. 486, pp. 112–16.
M. Aoyama and T. Kobayashi: Cast Met., 1990, vol. 3, pp. 122–28.
N. Varahraam and O. Yanagisawa: Cast Met., 1990, vol. 3, pp. 129–39.
T. Takahashi, T. Abe, and S. Tada: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1589–98.
S.K. Putatunda and P.K. Gadicherla: Mater. Sci. Eng. A, 1999, vol. 286, pp. 15–31.
H.S. Chen and D. Turnbull: Acta Metall., 1969, vol. 17, pp. 1021–31.
C.P. Chou and D. Turnbull: J. Non-Cryst. Solids, 1975, vol. 17, pp. 169–88.
C.P. Chou and F. Spaepen: Acta Metall., 1975, vol. 23, pp. 609–13.
H.W. Kui, A.L. Greer, and D. Turnbull: Appl. Phys. Lett., 1984, vol. 45, pp. 615–18
K.L. Lee and H.W. Kui: J. Mater. Res., 1999, vol. 14, pp. 3653–62
W.H. Guo and H.W. Kui: Acta Mater., vol. 48, pp. 2117–21
K.L. Ng: M.Phil. Thesis, Chinese University of Hong Kong, Shatin, 2000.
The device was custom-made by Y.T. Ho.
M.F. Ashby and D.R.H. Jones: Engineering Materials 2, 3rd ed., Elsevier, Oxford, United Kingdom, 2006, p. 198.
J.W. Cahn: Trans. TMS-AIME, 1968, vol. 242, pp. 166–80.
H.S. Chen: Mater. Sci. Eng., 1976, vol. 23, pp. 151–54.
L.E. Tanner and R. Ray: Scripta Metall., 1980, vol. 14, pp. 657–62.
C.O. Kim and W.L. Johnson: Phys. Rev. B, 1981, vol. 23, pp. 143–47.
E.S. Park, E.Y. Jeong, J.K. Lee, J.C. Bae, A.R. Kwon, A. Gebert, L. Schultz, H.J. Chang, and D.H. Kim: Scripta Mater., 2007, vol. 56, pp. 197–200.
T. Wada, D. Louzguine-Luzgin, and A. Inoue: Scripta Mater., 2007, vol. 57, pp. 901–04.
N. Mattern, G. Goerigk, U. Vainio, M.K. Miller, T. Gemming, and J. Eckert: Acta Mater., 2009, vol. 57, pp. 903–08.
M.E. Schlessinger and Q. Xiang: J. Alloys Compd., 2001, vol. 321, pp. 242–47.
Y.L. Yip and H.W. Kui: unpublished research.
M.F. Ashby and D.R.H. Jones: Engineering Materials 2, 3rd ed., Elsevier, Oxford, United Kingdom, 2006, p. 223.
G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, Singapore, 1988, pp. 189–91.
Acknowledgments
The work described in this article was partially supported by a grant from the Research Grants Council of the Hong Kong Special Administration Region, China (Project No. 401106).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted October 9, 2009.
Rights and permissions
About this article
Cite this article
Ho, C., Leung, C., Yip, Y. et al. Ductile Fe83C17 Alloys of Ultrafine Networklike Microstructure. Metall Mater Trans A 41, 3443–3451 (2010). https://doi.org/10.1007/s11661-010-0408-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-010-0408-y