Skip to main content
Log in

Deformation behavior of Zr3Al-Nb alloys I: Room-temperature and high-temperature deformation study

  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

The deformation behavior of the Zr3Al-Nb alloys was studied by measuring hardness at different temperatures, by hot rolling, and by hot pressing. Using the hardness data, elasticity and plasticity parameters were estimated and were used to determine the suitable temperature range of deformation for these alloys. Hot rolling and hot pressing were applied to determine the optimum temperatures and annealing time for carrying out deformation successfully in these alloys. Microstrural investigation of the hotdeformed samples revealed that the matrix β phase has undergone substantial deformation and the second intermetallic phase, Zr2(Al,Nb), underwent dissolution and re-precipitation. The hardness of the fully annealed Zr3Al-Nb alloys showed two types of temperature dependence. Transition temperatures for the change in behavior, intrinsic hardness, and softening coefficient were determined. The hardness of the fully annealed alloys rolled to different extent at various temperatures and subsequently heat treated was used to study the recovery process. The microstructural study of room-temperature deformed binary Zr3Al alloy showed the splitting of the superlattice dislocations into partials containing superlattice intrinsic stacking faults.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. E.M. Schulson: J. Nucl. Mater., 1979, vol. 83, p. 239.

    Article  CAS  Google Scholar 

  2. E.M. Schulson: in Intermetallic Compounds, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., New York, NY, 1994, vol. 2, p. 133.

    Google Scholar 

  3. E.M. Schulson and J.A. Roy: J. Nucl. Mater., 1977, vol. 71, p. 124.

    Article  CAS  Google Scholar 

  4. H.E. Rosinger and B.J.S. Wilkins: J. Nucl. Mater., 1980, vol. 89, pp. 347–53.

    Article  CAS  Google Scholar 

  5. K. Aoki and O. Izumi: J. Mater. Sci., 1979, vol. 14, p. 1800.

    Article  CAS  Google Scholar 

  6. C.G. Mckamey, J.A. Horton, and C.T. Liu: J. Mater. Res., 1989, vol. 4, p. 1156.

    CAS  Google Scholar 

  7. D. Banerjee, A.K. Gogia, T.K. Nandy, and V.A. Joshi: Acta Metall., 1988, vol. 36, p. 871; D.A. Koss, D. Banerjee, D.A. Lukasak, and A.K. Gogia: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, p. 175.

    Article  CAS  Google Scholar 

  8. L.M. Hsiung and H.N.G. Wadley: Scripta Metall. Mater., 1992, vol. 26, pp. 35–40.

    Article  CAS  Google Scholar 

  9. L.M. Hsiung and H.N.G. Wadley: Scripta Metall. Mater., 1992, vol. 26, pp. 1071–76.

    Article  CAS  Google Scholar 

  10. H.D. Merchant, G.S. Murthy, S.N. Bhadur, L.T. Dwivedi, and Y. Mehrotra: J. Mater. Sci., 1973, vol. 8, p. 437.

    Article  CAS  Google Scholar 

  11. J.H. Westbrook: Trans. ASM, 1953, vol. 45, p. 221.

    Google Scholar 

  12. E.R. Petty: Metallurgica, 1957, vol. 56, p. 231.

    CAS  Google Scholar 

  13. Binary Alloy Phase Diagrams, T.B. Massalski, J.C. Murry, L.H. Bernett, and H. Baker, eds., ASM, Metals Park, OH, 1986, vol. 1, p. 187.

    Google Scholar 

  14. T.R.G. Kutty: Ph.D. Thesis, Indian Institute of Sciences, Bangalore, 1996.

    Google Scholar 

  15. R. Tewari, N. Prabhu, G.K. Dey, P. Mukhopadhyay, and S. Banerjee: Mater. Trans., 2002, vol. 33A, p. 1919.

    CAS  Google Scholar 

  16. R. Tewari: Ph.D. Thesis, IIT, Mumbai, 2000.

    Google Scholar 

  17. S. Banerjee and R.W. Cahn: Acta Metall., 1983, vol. 31, p. 721.

    Google Scholar 

  18. A. Howie and M.J. Whelan: Proc. R. Soc. A, 1962, vol. 267, p. 206.

    CAS  Google Scholar 

  19. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Book Company, New York, NY, 1986.

    Google Scholar 

  20. Y.V. Milman, B.A. Galanov, and S.I. Chugnova: Acta Metall. Mater., 1993, vol. 41, p. 2523.

    Article  CAS  Google Scholar 

  21. P. Holdway and A.E. Staton-Bevan: J. Mater. Sci., 1986, vol. 21, pp. 2843–49.

    Article  CAS  Google Scholar 

  22. Hand Book of Ternary Alloy Phase Diagrams, P. Villars, A. Prince, and H. Okamoto, eds., ASM INTERNATIONAL., Materials Park, OH, 1995, vol. 4, p. 4148.

    Google Scholar 

  23. R. Tewari, G.K. Dey, R.K. Fotedar, and N. Prabhu: Proc. Adv. Mater. Processing, Nov. 9–10, 2001, Roorkee, S. Ray, S. Singh, and S.K. Nath, eds., R.K. Printers and Publishers, Roorkee, 2001, p. 210.

    Google Scholar 

  24. A. Peruzzi and J. Bolcich: J. Nucl. Mater., 1990, vol. 174, p. 1.

    Article  CAS  Google Scholar 

  25. R. Tewari, G.K. Dey, T.R.G. Kutty, A.K. Sengupta, N. Prabhu, and S. Banerjee: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 205–16.

    CAS  Google Scholar 

  26. T.R.G. Kutty, K. Ravi, and C. Ganguly: J. Nucl. Mater., 1999, vol. 265, p. 91.

    Article  CAS  Google Scholar 

  27. T.R.G. Kutty, T. Jarvis, and C. Ganguly: J. Nucl. Mater., 1997, vol. 246, p. 189.

    Article  CAS  Google Scholar 

  28. A. Salnas-Rodriguez, M.G. Akben, J.J. Jonas, and E.F. Ibrahim: Can. Met. Q., 1985, vol. 24, p. 259.

    Google Scholar 

  29. S.G. Song and G.T. Gray III: Metall. Trans. A, 1995, vol. 26A, pp. 2665–76.

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tewari, R., Dey, G.K., Fotedar, R.K. et al. Deformation behavior of Zr3Al-Nb alloys I: Room-temperature and high-temperature deformation study. Metall Mater Trans A 35, 189–203 (2004). https://doi.org/10.1007/s11661-004-0120-x

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11661-004-0120-x

Keywords

Navigation