A 500 °C isothermal section for the Al-Au-Cu system

Abstract

The Al-Au-Cu system and its associated ternary alloys and intermetallic compounds is surprisingly poorly known, and the authors could find no phase diagram for it in the literature. This article addresses this omission by presenting an isothermal section at 500 °C, derived with the aid of X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), metallography, and hardness measurements. The samples studied had generally received an anneal of 2 hours at 500 °C, primarily in order to complete any transformations that occurred during solidification and cooling of the castings. The possibility of further changes on protracted annealing at 500 °C is not ruled out, and the diagram presented is, therefore, applicable only to material prepared by thermal processing of an industrial nature. The presence of a ternary β phase with a nominal stoichiometry of AlAu_2−x Cu_1−x (0≤x≤1) was confirmed, and its phase field at 500 °C was determined. A number of the binary intermetallic phases were found to exhibit some solid solubility of the ternary element. In particular, the γ-Al₄Cu₉ phase extends deep into the ternary and, in the vicinity of the commercially interesting 18-carat line, appears to exist in a ternary ordered form, designated here as γ ₂ .