Abstract
Fine bubbles have been widely applied in many fields such as industry, medical engineering and agricultures. Therefore, many attentions have been paid to the study of fine bubble generations in order to increase the yield while decrease the cost. However, the generation process of fine bubbles is a quite complicated process in which multiple hydrodynamic forces are interacted in the gas-liquid two-phase flow. Many studies focus on the techniques of the converging-diverging nozzle (venturi tube) generator, which is famous for its simple and cheap features, and generates fine bubbles by using the miniaturization phenomenon of bubbles occurring in the venturi tube. However, the impact conditions on the amount and size of bubbles such as nozzle geometry and bleed air haven’t been investigated clearly. In this work, we implement many experiments on the venturi tube fine bubble generators with different geometries and generating conditions, and evaluate different factors impacting the production components such as the volume and the bubble size. The experimental results show that the supersonic flow filed in the venturi tube promotes the miniaturization of the bubbles, and the convergent angle of the nozzle and air bleed have a great impact on the size and volume of bubbles.
Similar content being viewed by others
Abbreviations
- A* :
-
area ratio of the bubble in the aquarium
- D a :
-
minimum diameter of the bubble/µm
- p in :
-
inlet supply pressure of water to the nozzle/kPa
- Δp :
-
pressure difference of minimum wall pressure and atmospheric pressure/kPa
- Q w :
-
flow rate of water in the nozzle/L·min−1
- Q i :
-
flow rate of bleed air/mL·min−1
- θ :
-
diverging angle of the nozzle/degree
References
Zhao L., Sun L.C., Mo Z.Y., Du M., Huang J., Bao J.J., Tang J.G., Xie G., Effects of the divergent angle on bubble transportation in a rectangular venturi channel and its performance in producing fine bubbles. International Journal of Multiphase Flow, 2019, 114: 192–206.
Huang J., Sun L., Du M., Mo Z., Zhao L., A visualized study of interfacial behavior of air-water two-phase flow in a rectangular venturi channel. Theoretical and Applied Mechanics Letters, 2018, 8(5): 334–344.
Reichmann F., Tollkötter A., Körner S., Kockmann N., Gas-liquid dispersion in micronozzles and microreactor design for high interfacial area. Chemical Engineering Science, 2017, 169(21): 151–163.
Fujiwara A., Bubble breakup phenomena in a venturi tube. ASME/JSME 2007 5th Joint Fluids Engineering Conference, California, USA, 2007, 1: 553–560.
Uesawa S., Bubble behavior and flow characteristics in venturi tubes. The University of Tsukuba, Tsukuba, Japan, 2014. (in Japanese)
Nomura Y., Uesawa S.I., Kaneko A.Y., Study on bubble breakup mechanism in a venturi tube. ASME-JSME-KSME Joint Fluids Engineering Conference, Japan, 2011, 1: 2533–2540.
Batchelor G.K., An introduction to fluid dynamics. Cambridge: University Press, 2000, ISBN 978-0-521-66396-0.
Micro-track UPA. https://www.microtrac.com/
Instruction Manual of Particle Size Analyzer MICROTRAC UPA MODEL: 9340-UPA. (in Japanese)
Moholkar V.S., Senthil Kumar P., Pandit A.B., Hydrodynamic cavitation for sonochemical effects. Ultrasonics Sonochemistry, 1999, 6: 53–65.
Reichmann F., Koch M.J., Körner S., Kockmann N., Internal jet formation during bubble generation in microchannels. ASME 15th International Conference on Nanochannels, Microchannels, and Minichannels-Cambridge, MA, USA, 2017.
Huang J., Sun L.C., Du M., Liang Z. Mo Z.Y. Tang J.G., Xie G., An investigation on the performance of a micro-scale venturi bubble generator. Chemical Engineering Journal, 2019, 386: 120980. DOI: https://doi.org/10.1016/j.cej.2019.02.068.
Li J.J., Song Y.C., Yin J.L., Wang D.Z., Investigation on the effect of geometrical parameters on the performance of a venturi type bubble generator. Nuclear Engineering and Design, 2017, 325: 90–96.
Song Y.C., Wang D.Z., Yin J.L., Li J.J., Cai K.B., Experimental studies on bubble breakup mechanism in a venturi bubble generator. Annals of Nuclear Energy, 2019, 130: 259–270.
Huang J., Sun L.C., Liu H.T., Mo Z.Y., Tang J.G., Xie G., Du M., A review on bubble generation and transportation in venturi-type bubble generators. Experimental and Computational Multiphase Flow, 2020, 2: 123–134.
Acknowledgement
The experiments of bubble particle size measurement are supported by the Mishima Laboratory in Fukuoka University.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Jiang, X., Yasunobu, T., Nakamura, A. et al. Miniaturization of Bubbles by Shock Waves in Gas-Liquid Two-phase Flow in the Venturi Tube. J. Therm. Sci. 30, 1068–1076 (2021). https://doi.org/10.1007/s11630-021-1432-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11630-021-1432-5