Abstract
Overcasting is a new kind of dissimilar joining technique used to produce the aluminum(solid)/magnesium(liquid) bonding bi-metallic material in this study. For the Al/Mg (A390/AM60) bi-metallic samples, the interface microstructures are the research points, which directly influence the mechanical properties. It is, therefore, of vital importance to find a method to improve the interface microstructures. This research focused on the effect of the calcium (Ca) addition in the liquid Mg alloys and the heat treatment on the A390/AM60 interface microstructures of the bi-metallic samples. The testing results showed that, with Ca addition in AM60, owing to two possible reasons, the interface microstructure and the shear strength of the A390/AM60 bi-metallic samples could be improved. The heat treatment could further improve the interface microstructure and the mechanical properties by dissolving β-Mg17Al12 into α-Mg and destroying the Mg2Si layer structure.
Similar content being viewed by others
References
Luo A A. Magnesium: Current and Potential Automotive Applications[J]. JOM. 2002, 54(2): 42–48
Taub AI, Krajewski PE, Luo AA, et al. The Evolution of Technology for Materials Processing over the Last 50 Years: The Automotive Example[J]. JOM, 2007, 59(2): 48–57
Varghese VMJ, Suresh MR, Siva Kumar D. Recent Developments in Modeling of Heat Transfer during TIG Welding-a Review[J]. Int. J. Adv. Manuf. Technol., 2013, (64): 749–754
Gungor Beytullah Kaluc, et al. Mechanical, Fatigue and Microstructural Properties of Friction Stir Welded 5083-H111 and 6082-T651 Aluminum Alloys[J]. Materials & Design, 2014, (56): 84–90
LIU Liming, LIU Xujing, LIU Shunhua. Microstructure of Laser-TIG Hybrid Welds of Dissimilar Mg Alloy and Al Alloy with Ce as Interlayer[J]. Scr. Mater., 2006, (55): 383–386
Atabaki M, Mazar, Nikodinovski M, et al. Experimental and Numerical Investigations of Hybrid Laser Arc Welding of Aluminum Alloys in the Thick T-joint Configuration[J]. Optics and Laser Technology, 2014, (59): 68–92
Luo AA, Sachdev AK, Powell BR. Advanced Casting Technologies for Lightweight Automotive Applications[J]. China Foundry, 2010, 7(4): 463–469
Papis KJM, Loffler JF, Uggowitzer PJ. Interface Formation between Liquid and Solid Mg Alloys-An Approach to Continuously Metallurgic Joining of Magnesium Parts[J]. Mater. Sci. Eng. A, 2010, (527): 2274–2279
Porter FC. Zinc Handbook[M]. Boca Raton: CRC Press, 1991
XU Guangchen, Luo AA, CHEN Yiqing. Interfacial Phenomena in Magnesium/Aluminum Bi-metallic Castings[J]. Material Science and Engineering A-Structure Materials Properties Microstructure and Process, 2014, (595): 154–158
DAI Jianhong, SONG Yan, YANG Rui. Influences of Alloying Elements and Oxygen on the Stability and Elastic Properties of Mg17Al12[J]. Journal of Alloys and Compounds, 2014, (595): 142–147
YANG Mingbo, DUAN Chengyu, LI Hongliang. Effects of Minor Ca Addition on As-cast Microstructure and Mechanical Properties of Mg-4Y-1.2Mn-1Zn (wt%) Magnesium Alloy[J]. Journal of Alloys and Compounds, 2013, (574): 165–173
Vissersa R, Van Huis MA, Jansen J, et al. The Crystal Structure of the ß’ Phase in Al-Mg-Si Alloys[J]. Acta Materialia, 2007, 55(11): 3815–3823
Andersen SJ, Zandbergen HW, Jansen J, et al. The Crystal Structure of the β″ Phase in Al-Mg-Si Alloys[J]. Acta Materialia, 1998, 46(9): 3283–3298
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the National Natural Science Foundation of China (No.51571080)
Rights and permissions
About this article
Cite this article
Ma, L., Chen, Y., Liu, L. et al. Effect of Ca addition and heat treatment on the A390(S)/AM60(L) interface microstructure. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 31, 1117–1122 (2016). https://doi.org/10.1007/s11595-016-1499-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-016-1499-0