Abstract
Using Geogrid-Reinforced Soil (GRS) we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a highway section where the height of backfill is 13.5 meters, geogrids were used at two bridge approaches to address the bumping problems. Some soil pressure cells were used to measure the normal and lateral soil pressure at different locations in the roadbed. The experimental results indicate that geogrids in geogrid-reinforced soil (GRS) could produce an uplift force, the closer the location to the abutment, the larger the uplift force, and the reduction of measured soil pressures compared with theoretical values was the largest at the bottom of roadbed, less at the top than at the bottom, and the least in the mid-height of roadbed than at the bottom. These findings are different from those of the traditional greogrid-reinforced subgrade design method.
Similar content being viewed by others
References
The Ministry of Communications in China. Technical Specification for Application of Geosynthetics in Highway[M], Beijing: The People’s Transportation Publishing Company, 1999:15–18 (in Chinese)
G L Feng. Study on Bridge Approach Settlement Criteria and GRS at Bridge Approach [D]. Shanghai: Tongji University, 2003:125–128(in Chinese)
G L Feng, R Luo, T Q Ling. Study on Method of Geosynthetics Reinforced Soil at Bridge Approach[C]. In: Kumares C. Sinha, T F Fwa, Ruey L Cheu eds. Applications of Technologies in Transportation Engineering, Beijing: American Society Civil Engineering, 2004: 444–449
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Feng, G., Luo, R. & Chen, C. Mechanism of geogrid reinforced soil at bridge approach. J. Wuhan Univ. Technol. 22, 376–379 (2007). https://doi.org/10.1007/s11595-005-2376-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11595-005-2376-4