Abstract
The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former. In this study, the equations for the deflection curve and vibration frequencies of a simply supported discontinuous beam under axial loads are derived analytically on the basis of boundary, continuity, and deformation compatibility conditions by using equivalent spring models. The equation for the deflection curve is solved using undetermined coefficient methods. The normal function of the transverse vibration equation is obtained by separating variables. The differential equations for the beam that consider moments of inertia, shearing effects, and gyroscopic moments are investigated using the transfer matrix method. The deflection and vibration frequencies of the discontinuous beam are studied under different axial loads and connection spring stiffness. Results show that deflection decreases and vibration frequencies increase exponentially with increasing connection spring stiffness. Moreover, both variables remain steady when connection spring stiffness reaches a considerable value. Lastly, an experimental study is conducted to investigate the vibration characteristics of a discontinuous beam with a curvic coupling, and the results exhibit a good match with the proposed model.
Article PDF
Similar content being viewed by others
Change history
28 July 2022
An Erratum to this paper has been published: https://doi.org/10.1007/s11465-022-0709-z
References
Pilkey W D, Kang W. Exact stiffness matrix for a beam element with axial force and shear deformation. Finite Elements in Analysis and Design, 1996, 22(1): 1–13
Timoshenko S. Strength of Materials, Part I: Elementary Theory and Problems. 2nd ed. New York: D.Van Nostrand, 1940
Zhang D Y, Fu J W, Zhang Q C, et al. An effective numerical method for calculating nonlinear dynamics of structures with dry friction: application to predict the vibration response of blades with underplatform dampers. Nonlinear Dynamics, 2017, 88(1): 223–237
Qin Z Y, Han Q K, Chu F L. Analytical model of bolted disk-drum joints and its application to dynamic analysis of jointed rotor. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014, 228(4): 646–663
Luan Y, Guan Z Q, Cheng G D, et al. A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints. Journal of Sound and Vibration, 2012, 331(2): 325–344
Song Y X, Hartwigsen C J, McFarland D M, et al. Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements. Journal of Sound and Vibration, 2004, 273(1-2): 249–276
Han F, Dan D H, Cheng W. Exact dynamic characteristic analysis of a double-beam system interconnected by a viscoelastic layer. Composites. Part B, Engineering, 2019, 163: 272–281
Han F, Dan D H, Cheng W. An exact solution for dynamic analysis of a complex double-beam system. Composite Structures, 2018, 193: 295–305
Han F, Dan D H, Cheng W, et al. A novel analysis method for damping characteristic of a type of double-beam systems with viscoelastic layer. Applied Mathematical Modelling, 2020, 80: 911–928
Han F, Zhang Y L, Zang J B, et al. Exact dynamic analysis of shallow sagged cable system-theory and experimental verification. International Journal of Structural Stability and Dynamics,2019, 19(12): 1950153
Han F, Dan D H, Cheng W, et al. An improved Wittrick-Williams algorithm for beam-type structures. Composite Structures, 2018, 204: 560–566
Paunovic S, Cajic M, Karlicic D, et al. A novel approach for vibration analysis of fractional viscoelastic beams with attached masses and base excitation. Journal of Sound and Vibration, 2019, 463: 114955
Wu J S, Chang B H. Free vibration of axial-loaded multi-step Timoshenko beam carrying arbitrary concentrated elements using continuous-mass transfer matrix method. European Journal of Mechanics. A, Solids, 2013, 38(3): 20–37
Lin H Y. Dynamic analysis of a multi-span uniform beam carrying a number of various concentrated elements. Journal of Sound and Vibration, 2008, 309(1-2): 262–275
Hong S W, Kim J W. Modal analysis of multi-span Timoshenko beams connected or supported by resilient joints with damping. Journal of Sound and Vibration, 1999, 227(4): 787–806
Yuan Q, Gao R, Feng Z P, et al. Analysis of dynamic characteristics of gas turbine rotor considering contact effects and pre-tightening force. In: Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air. Berlin: ASME, 2009, 983–988
Chenaghlou M R, Nooshin H. Axial force-bending moment interaction in a jointing system part I: Experimental study. Journal of Constructional Steel Research, 2015, 113: 261–276
Chenaghlou M R, Nooshin H. Axial force-bending moment interaction in a jointing system part II: Analytical study. Journal of Constructional Steel Research, 2015, 113: 277–285
Yuan S X, Zhang Y Y, Fan Y G, et al. A method to achieve uniform clamp force in a bolted rotor with curvic couplings. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2016, 230(5): 335–344
Liu S G, Ma Y H, Zhang D Y, et al. Studies on dynamic characteristics of the joint in the aero-engine rotor system. Mechanical Systems and Signal Processing, 2012, 29(5): 120–136
Failla G, Santini A. On Euler-Bernouzlli discontinuous beam solutions via uniform-beam Green’s functions. International Journal of Solids and Structures, 2007, 44(22-23): 7666–7687
Failla G, Santini A. A solution method for Euler-Bernoulli vibrating discontinuous beams. Mechanics Research Communications, 2008, 35(8): 517–529
Failla G. Closed-form solutions for Euler-Bernoulli arbitrary discontinuous beams. Archive of Applied Mechanics, 2011, 81(5): 605–628
Failla G, Impollonia N. General finite element description for nonuniform and discontinuous beam elements. Archive of Applied Mechanics, 2012, 82(1): 43–67
Failla G. An exact modal analysis approach to vibration analysis of structures with mass-spring subsystems and rotational joints. Journal of Sound and Vibration, 2019, 438: 191–219
Hei D, Lu Y J, Zhang Y F, et al. Nonlinear dynamic behaviors of a rod fastening rotor supported by fixed-tilting pad journal bearings. Chaos, Solitons, and Fractals, 2014, 69: 129–150
Cui Y M, Fang Z D, Su J Z, et al. Precise modeling of arc tooth face-gear with transition curve. Chinese Journal of Aeronautics, 2013, 26(5): 1346–1351hv
Zhao N, Li W, Hu T, et al. Quasistatic load sharing behaviours of concentric torque-split face gear transmission with flexible face gear. Mathematical Problems in Engineering, 2018, 6568519
Works G. Curvic coupling design. Gear Technology, 1986, 3(6): 34–48
Richardson I J, Hyde T M, Becker A A, et al. A three-dimensional finite element investigation of the bolt stresses in an aero-engine curvic coupling under a blade release condition. Journal of Aerospace Engineering, 2000, 214(4): 231–245
Lee J W, Lee J Y. An exact transfer matrix expression for bending vibration analysis of a rotating tapered beam. Applied Mathematical Modelling, 2018, 53: 167–188
Patil D P, Maiti S K. Detection of multiple cracks using frequency measurements. Engineering Fracture Mechanics, 2003, 70(12): 1553–1572
Dan D H, Han F, Cheng W, et al. Unified modal analysis of complex cable systems via extended dynamic stiffness method and enhanced computation. Structural Control Health Monitoring, 2019, 26(10): e2435
Hong J, Chen X Q, Wang Y F, et al. Optimization of dynamics of non-continuous rotor based on model of rotor stiffness. Mechanical Systems and Signal Processing, 2019, 131(15): 166–182
Iranzad M, Ahmadian H. Identification of nonlinear bolted lap joint models. Computers & Structures, 2012, 96-97(4): 1–8
Timoshenko S. Vibration Problems in Engineering. 2nd ed. New York: D.Van Nostrand, 1937
Wang L, Yu M C. Effect of axial force on the lateral vibration characteristics of Timoshenko beam under free boundary condition. Journal of Ordnance Equipment Engineering, 2018, 39: 36–39 (in Chinese)
Bronshtein I, Semendyayev K, Musiol G, et al. Handbook of Mathematics. Berlin: Springer, 2015: 949–1022
Genta G. Dynamics of Rotating Systems. New York: Springer, 2005
Liu H, Hong J, Shao F Y, et al. Progress and prospect of structural design and processing technology of curvic coupling. Journal of Propulsion Technology, 2018, 39(4): 1–10 (in Chinese)
Xiang T, Lan D, Zhang S, et al. Experimental modal test of the spiral bevel gear wheel using the PolyMAX method. Journal of Mechanical Science and Technology, 2018, 32(1): 21–28
Acknowledgements
The authors would like to acknowledge the financial support provided by the Ministry of Industry and Information Technology of China (Grant No. JSZL2016204B102) and the National Natural Science Foundation of China (Grant Nos. 51575022 and 11772022).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and the source, a link is provided to the Creative Commons license, and any changes made are indicated.
Images or other third-party materials in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Liu, H., Hong, J. & Zhang, D. Bending and vibration of a discontinuous beam with a curvic coupling under different axial forces. Front. Mech. Eng. 15, 417–429 (2020). https://doi.org/10.1007/s11465-019-0584-4
Received:
Accepted:
Published:
Version of record:
Issue date:
DOI: https://doi.org/10.1007/s11465-019-0584-4