Frontiers of Mechanical Engineering

, Volume 12, Issue 1, pp 33–45 | Cite as

Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces

  • Shaolin Xu
  • Tsunemoto Kuriyagawa
  • Keita Shimada
  • Masayoshi Mizutani
Open Access
Review Article

Abstract

In this paper, the state of art of ultrasonic-assisted machining technologies used for fabrication of micro/nano-textured surfaces is reviewed. Diamond machining is the most widely used method in industry for manufacturing precision parts. For fabrication of fine structures on surfaces, conventional diamond machining methods are competitive by considering the precision of structures, but have limitations at machinable structures and machining efficiency, which have been proved to be partly solved by the integration of ultrasonic vibration motion. In this paper, existing ultrasonic-assisted machining methods for fabricating fine surface structures are reviewed and classified, and a rotary ultrasonic texturing (RUT) technology is mainly introduced by presenting the construction of vibration spindles, the texturing principles, and the applications of textured surfaces. Some new ideas and experimental results are presented. Finally, the challenges in using the RUT method to fabricate micro/ nano-textured surfaces are discussed with respect to texturing strategies, machinable structures, and tool wear.

Keywords

ultrasonic-assisted machining textured surface micro/nano-structures functional performance 

Notes

Acknowledgements

The work was supported by the Grant-in-Aid for Young Scientists (B) (Grant No. 16K17990) from the Japan Society for the Promotion of Science.

References

  1. 1.
    Evans C J, Bryan J B. “Structured”, “textured” or “engineered” surfaces. CIRP Annals—Manufacturing Technology, 1999, 48(2): 541–556CrossRefGoogle Scholar
  2. 2.
    Bauer S, Schmuki P, von der Mark K, et al. Engineering biocompatible implant surfaces: Part I: Materials and surfaces. Progress in Materials Science, 2013, 58(3): 261–326CrossRefGoogle Scholar
  3. 3.
    Chung K K, Schumacher J F, Sampson E M, et al. Impact of engineered surface microtopography on biofilm formation of Staphylococcus aureus. Biointerphases, 2007, 2(2): 89–94CrossRefGoogle Scholar
  4. 4.
    Tsipenyuk A, Varenberg M. Use of biomimetic hexagonal surface texture in friction against lubricated skin. Journal of the Royal Society Interface, 2014, 11(94): 20140113CrossRefGoogle Scholar
  5. 5.
    Bhushan B. Biomimetics: Lessons from nature—An overview. Philosophical Transactions. Series A, Mathematical, Physical and Engineering Science, 2009, 367(1893): 1445–1486CrossRefGoogle Scholar
  6. 6.
    Bruzzone A A G, Costa H L, Lonardo P M, et al. Advances in engineered surfaces for functional performance. CIRP Annals— Manufacturing Technology, 2008, 57(2): 750–769CrossRefGoogle Scholar
  7. 7.
    Brinksmeier E, Gläbe R, Schönemann L. Review on diamondmachining processes for the generation of functional surface structures. CIRP Journal of Manufacturing Science and Technology, 2012, 5(1): 1–7CrossRefGoogle Scholar
  8. 8.
    Xu S, Nishikawa C, Shimada K, et al. Surface textures fabrication on zirconia ceramics by 3D ultrasonic vibration assisted slant feed grinding. Advanced Materials Research, 2013, 797: 326–331CrossRefGoogle Scholar
  9. 9.
    Xu S, Shimada K, Mizutani M, et al. Surface texturing and wettability evaluation of zirconia ceramics. In: Proceedings of International Conference on Leading Edge Manufacturing in 21st Century: LEM21. 2013, 7: 208–213CrossRefGoogle Scholar
  10. 10.
    Xu S, Shimada K, Mizutani M, et al. Fabrication of hybrid micro/ nano-textured surfaces using rotary ultrasonic machining with onepoint diamond tool. International Journal of Machine Tools and Manufacture, 2014, 86: 12–17CrossRefGoogle Scholar
  11. 11.
    Xu S, Shimada K, Mizutani M, et al. Development of a novel 2D rotary ultrasonic texturing technique for fabricating tailored structures. International Journal of Advanced Manufacturing Technology, 2016 (in press)Google Scholar
  12. 12.
    Xu S, Shimada K, Mizutani M, et al. Analysis of machinable structures and their wettability of rotary ultrasonic texturing method. Chinese Journal of Mechanical Engineering, 2016, 29(6): 1187–1192CrossRefGoogle Scholar
  13. 13.
    Denkena B, Kästner J, Wang B. Advanced microstructures and its production through cutting and grinding. CIRP Annals—Manufacturing Technology, 2010, 59(1): 67–72CrossRefGoogle Scholar
  14. 14.
    Guo P, Ehmann K F. Development of a tertiary motion generator for elliptical vibration texturing. Precision Engineering, 2013, 37(2): 364–371CrossRefGoogle Scholar
  15. 15.
    Guo P, Ehmann K F. An analysis of the surface generation mechanics of the elliptical vibration texturing process. International Journal of Machine Tools and Manufacture, 2013, 64: 85–95CrossRefGoogle Scholar
  16. 16.
    Ahmed S A, Hoon Ko J, Subbiah S, et al. Microtexture generation using controlled chatter machining in ultraprecision diamond turning. Journal of Micro and Nano-Manufacturing, 2015, 3(2): 021002CrossRefGoogle Scholar
  17. 17.
    Brehl D E, Dow T A. Review of vibration-assisted machining. Precision Engineering, 2008, 32(3): 153–172CrossRefGoogle Scholar
  18. 18.
    Suzuki N, Yokoi H, Shamoto E. Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting. Precision Engineering, 2011, 35(1): 44–50CrossRefGoogle Scholar
  19. 19.
    Brehl D E, Dow T A. 3-D microstructure creation using elliptical vibration-assisted machining. In: Proceedings of ASPE Spring Topical Meeting on Vibration Assisted Machining Technology. Raleigh, 2007, 21–26Google Scholar
  20. 20.
    Aurich J C, Egnmann J, Schueler G M, et al. Micro grinding tool for manufacture of complex structures in brittle materials. CIRP Annals —Manufacturing Technology, 2009, 58(1): 311–314CrossRefGoogle Scholar
  21. 21.
    Sugai T. Study on ultrasonic vibration cutting. Dissertation for the Master’s Degree. Sendai: Tohoku University, 2014Google Scholar
  22. 22.
    Shimada K. Study on Vibration Grinding. Dissertation for the Doctoral Degree. Sendai: Tohoku University, 2012Google Scholar
  23. 23.
    Denkena B, Biermann D. Cutting edge geometries. CIRP Annals— Manufacturing Technology, 2014, 63(2): 631–653CrossRefGoogle Scholar
  24. 24.
    Zhu Z, To S, Zhang S. Theoretical and experimental investigation on the novel end-fly-cutting-servo diamond machining of hierarchical micro-nanostructures. International Journal of Machine Tools and Manufacture, 2015, 94: 15–25CrossRefGoogle Scholar
  25. 25.
    Harano K, Satoh T, Sumiya H. Cutting performance of nanopolycrystalline diamond. Diamond and Related Materials, 2012, 24: 78–82CrossRefGoogle Scholar

Copyright information

© The Author(s) 2017

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Authors and Affiliations

  • Shaolin Xu
    • 1
  • Tsunemoto Kuriyagawa
    • 1
  • Keita Shimada
    • 2
  • Masayoshi Mizutani
    • 2
  1. 1.Division of Biomechanical Engineering, Graduate School of Biomedical EngineeringTohoku UniversitySendaiJapan
  2. 2.Department of Mechanical Systems Engineering, Graduate School of EngineeringTohoku UniversitySendaiJapan

Personalised recommendations