Abstract
Carbon fibre reinforced carbon (CFC) materials are increasingly applied as sample carriers in modern furnaces. Only their tendency to react with different metals at high temperatures by C-diffusion is a disadvantage, which can be solved by application of diffusion barriers. Within this study the feasibility of plasma sprayed Al2O3 coatings as diffusion barrier was studied. Al2O3 coatings were prepared by air plasma spraying (APS). The coatings were investigated in terms of their microstructure, bonding to CFC substrates and thermal stability. The results showed that Al2O3 could be well deposited onto CFC substrates. The coatings had a good bonding and thermal shock behavior at 1060°C. At higher temperature of 1270°C, crack network formed within the coating, showing that the plasma sprayed Al2O3 coatings are limited regarding to their application temperatures as diffusion barrier on CFC components.
Similar content being viewed by others
References
Klein J. Carbon-carbon composites. Advanced Materials & Process, 1986, 130: 64–68
Buckley J D. Carbon-carbon an overview. American Ceramic Bulletin, 1988, 67: 364–368
Bobzin K, Zhao L, Schlaefer T, Warda T. Development of oxide based diffusion barrier coatings for CFC components applied in modern furnaces. Frontiers of Mechanical Engineering, 2011, 6(4): 392–396
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bobzin, K., Zhao, L., Kopp, N. et al. Feasibility study of plasma sprayed Al2O3 coatings as diffusion barrier on CFC components. Front. Mech. Eng. 7, 371–375 (2012). https://doi.org/10.1007/s11465-012-0339-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-012-0339-y