Abstract
Designing highly-efficient parabolic trough receiver (PTR) contributes to promoting solar thermal utilization and alleviating energy crisis and environmental problems. A novel finned PTR with inner tube (FPTR-IT), which can provide different grades of thermal energy with two heat transfer fluids (oil and water), is designed to improve thermal efficiency. In this FPTR-IT, an inner tube and straight fins are employed to respectively lessen heat loss at upper and lower parts of the absorber. Based on the design, a numerical model is developed to investigate its performance. Comparisons with other PTRs indicate that the FPTR-IT can combine the advantages of PTR with inner tube and finned PTR and obtain the best performance. Moreover, performance evaluation under broad ranges of direct normal irradiances (300–1000 W/m2), flow rates (50–250 L/min) and inlet temperatures (400–600 K) of oil as well as flow rates (3.6–10 L/min) and inlet temperatures (298.15–318.15 K) of water is investigated. Compared with conventional PTR, heat loss is reduced by 20.7%–63.2% and total efficiency is improved by 0.03%–4.27%. Furthermore, the proportions of heat gains for water and oil are located in 8.3%–73.9% and −12.0%–64.3%, while their temperature gains are located in 11.6–37.9 K and −1.2–19.6 K, respectively. Thus, the proposed FPTR-IT may have a promising application prospect in remote arid areas or islands to provide different grades of heat for electricity and freshwater production.
Similar content being viewed by others
References
Du S, Li Z Y, He Y L, et al. Experimental and numerical analysis of the hydraulic and thermal performances of the gradually-varied porous volumetric solar receiver. Sci China Tech Sci, 2020, 63: 1224–1234
He Y L, Qiu Y, Wang K, et al. Perspective of concentrating solar power. Energy, 2020, 198: 117373
Islam M T, Huda N, Abdullah A B, et al. A comprehensive review of state-of-the-art concentrating solar power (csp) technologies: Current status and research trends. Renew Sustain Energy Rev, 2018, 91: 987–1018
Hou H J, Wang M J, Yang Y P, et al. Performance analysis of a solar-aided power generation (SAPG) plant using specific consumption theory. Sci China Tech Sci, 2016, 59: 322–329
Zheng Z J, He Y L, Li Y S. An entransy dissipation-based optimization principle for solar power tower plants. Sci China Tech Sci, 2014, 57: 773–783
Han X, Xu C, Pan X Y, et al. Dynamic analysis of a concentrating photovoltaic/concentrating solar power (CPV/CSP) hybrid system. Sci China Tech Sci, 2019, 62: 1987–1998
Han X, Xu C, Ju X, et al. Energy analysis of a hybrid solar concentrating photovoltaic/concentrating solar power (CPV/CSP) system. Sci Bull, 2015, 60: 460–469
Zheng Y, Hatzell K B. Technoeconomic analysis of solar thermal desalination. Desalination, 2020, 474: 114168
Andrés-Mañas J A, Roca L, Ruiz-Aguirre A, et al. Application of solar energy to seawater desalination in a pilot system based on vacuum multi-effect membrane distillation. Appl Energy, 2020, 258: 114068
Ahmadi M, Thimmaiah P, Bahrami M, et al. Experimental and numerical investigation of a solar eductor-assisted low-pressure water desalination system. Sci Bull, 2016, 61: 959–973
Zhang H, Shuai Y, Guene Lougou B, et al. Thermal characteristics and thermal stress analysis of solar thermochemical reactor under high-flux concentrated solar irradiation. Sci China Tech Sci, 2020, 63: 1776–1786
Cheng Z D, Leng Y K, Men J J, et al. Numerical study on a novel parabolic trough solar receiver-reactor and a new control strategy for continuous and efficient hydrogen production. Appl Energy, 2020, 261: 114444
Song C, Liu X L, Xuan Y M, et al. Granular porous calcium carbonate particles for scalable and high-performance solar-driven thermochemical heat storage. Sci China Tech Sci, 2021, 64: 2142–2152
Zhou X, Tian S, An J, et al. Modeling occupant behavior’s influence on the energy efficiency of solar domestic hot water systems. Appl Energy, 2022, 309: 118503
Deng Y C, Quan Z H, Zhao Y H, et al. Experimental investigations on the heat transfer characteristics of micro heat pipe array applied to flat plate solar collector. Sci China Tech Sci, 2013, 56: 1177–1185
Wang F Q, Cheng Z M, Tan J Y, et al. Progress in concentrated solar power technology with parabolic trough collector system: A comprehensive review. Renew Sustain Energy Rev, 2017, 79: 1314–1328
Li L, Yu H J, Li Y S, et al. Characteristics of the transient thermal load and deformation of the evacuated receiver in solar parabolic trough collector. Sci China Tech Sci, 2020, 63: 1188–1201
Xiong Y X, Wu Y T, Ma C F, et al. Numerical investigation of thermal performance of heat loss of parabolic trough receiver. Sci China Tech Sci, 2010, 53: 444–452
Bellos E, Tzivanidis C. Alternative designs of parabolic trough solar collectors. Prog Energy Combust Sci, 2019, 71: 81–117
Manikandan G K, Iniyan S, Goic R. Enhancing the optical and thermal efficiency of a parabolic trough collector—A review. Appl Energy, 2019, 235: 1524–1540
Abdulhamed A J, Adam N M, Ab-Kadir M Z A, et al. Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications. Renew Sustain Energy Rev, 2018, 91: 822–831
Ajbar W, Parrales A, Huicochea A, et al. Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review. Renew Sustain Energy Rev, 2022, 156: 111947
Wang Q, Shen B, Huang J, et al. A spectral self-regulating parabolic trough solar receiver integrated with vanadium dioxide-based thermochromic coating. Appl Energy, 2021, 285: 116453
Wang Q, Yang H, Zhong S, et al. Comprehensive experimental testing and analysis on parabolic trough solar receiver integrated with radiation shield. Appl Energy, 2020, 268: 115004
Bellos E, Tzivanidis C. Enhancing the performance of a parabolic trough collector with combined thermal and optical techniques. Appl Thermal Eng, 2020, 164: 114496
Zhao K, Jin H, Gai Z, et al. A thermal efficiency-enhancing strategy of parabolic trough collector systems by cascadingly applying multiple solar selective-absorbing coatings. Appl Energy, 2022, 309: 118508
Yang H, Wang Q, Zhong S, et al. Spectral-spatial design and coupling analysis of the parabolic trough receiver. Appl Energy, 2020, 264: 114692
Wang Q, Yang H, Hu M, et al. Optimization strategies and verifications of negative thermal-flux region occurring in parabolic trough solar receiver. J Cleaner Product, 2021, 278: 123407
Qiu Y, Xu Y, Li Q, et al. Efficiency enhancement of a solar trough collector by combining solar and hot mirrors. Appl Energy, 2021, 299: 117290
Qiu Y, Zhang Y, Li Q, et al. A novel parabolic trough receiver enhanced by integrating a transparent aerogel and wing-like mirrors. Appl Energy, 2020, 279: 115810
Li Q, Zhang Y, Wen Z X, et al. An evacuated receiver partially insulated by a solar transparent aerogel for parabolic trough collector. Energy Convers Manage, 2020, 214: 112911
Chavez Panduro E A, Finotti F, Largiller G, et al. A review of the use of nanofluids as heat-transfer fluids in parabolic-trough collectors. Appl Thermal Eng, 2022, 211: 118346
Hamzat A K, Omisanya M I, Sahin A Z, et al. Application of nanofluid in solar energy harvesting devices: A comprehensive review. Energy Convers Manage, 2022, 266: 115790
Tiwari A K, Kumar V, Said Z, et al. A review on the application of hybrid nanofluids for parabolic trough collector: Recent progress and outlook. J Cleaner Production, 2021, 292: 126031
Martínez-Merino P, Alcántara R, Gómez-Larrán P, et al. MoS2-based nanofluids as heat transfer fluid in parabolic trough collector technology. Renew Energy, 2022, 188: 721–730
Bellos E, Tzivanidis C, Tsimpoukis D. Enhancing the performance of parabolic trough collectors using nanofluids and turbulators. Renew Sustain Energy Rev, 2018, 91: 358–375
Sandeep H M, Arunachala U C. Solar parabolic trough collectors: A review on heat transfer augmentation techniques. Renew Sustain Energy Rev, 2017, 69: 1218–1231
Liu W, Liu P, Wang J B, et al. Exergy destruction minimization: A principle to convective heat transfer enhancement. Int J Heat Mass Transfer, 2018, 122: 11–21
Fan A, Deng J, Guo J, et al. A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts. Appl Thermal Eng, 2011, 31: 2819–2828
Huang Z, Li Z Y, Yu G L, et al. Numerical investigations on fully-developed mixed turbulent convection in dimpled parabolic trough receiver tubes. Appl Thermal Eng, 2017, 114: 1287–1299
Wang F Q, Lai Q Z, Han H Z, et al. Parabolic trough receiver with corrugated tube for improving heat transfer and thermal deformation characteristics. Appl Energy, 2016, 164: 411–424
Zhao Z, Bai F, Zhang X, et al. Experimental study of pin finned receiver tubes for a parabolic trough solar air collector. Sol Energy, 2020, 207: 91–102
Samiezadeh S, Khodaverdian R, Doranehgard M H, et al. CFD simulation of thermal performance of hybrid oil-Cu−Al2O3 nanofluid flowing through the porous receiver tube inside a finned parabolic trough solar collector. Sust Energy Technol Assess, 2022, 50: 101888
Kurşun B. Thermal performance assessment of internal longitudinal fins with sinusoidal lateral surfaces in parabolic trough receiver tubes. Renew Energy, 2019, 140: 816–827
Liu P, Lv J, Shan F, et al. Effects of rib arrangements on the performance of a parabolic trough receiver with ribbed absorber tube. Appl Thermal Eng, 2019, 156: 1–13
Sheikholeslami M, Said Z, Jafaryar M. Hydrothermal analysis for a parabolic solar unit with wavy absorber pipe and nanofluid. Renew Energy, 2022, 188: 922–932
Zheng Z J, Xu Y, He Y L. Thermal analysis of a solar parabolic trough receiver tube with porous insert optimized by coupling genetic algorithm and CFD. Sci China Tech Sci, 2016, 59: 1475–1485
Bozorg M V, Hossein Doranehgard M, Hong K, et al. CFD study of heat transfer and fluid flow in a parabolic trough solar receiver with internal annular porous structure and synthetic oil-Al2O3 nanofluid. Renew Energy, 2020, 145: 2598–2614
Liu P, Zheng N, Liu Z, et al. Thermal-hydraulic performance and entropy generation analysis of a parabolic trough receiver with conical strip inserts. Energy Convers Manage, 2019, 179: 30–45
Borunda M, Garduno-Ramirez R, Jaramillo O A. Optimal operation of a parabolic solar collector with twisted-tape insert by multi-objective genetic algorithms. Renew Energy, 2019, 143: 540–550
Peng H, Li M, Liang X. Thermal-hydraulic and thermodynamic performance of parabolic trough solar receiver partially filled with gradient metal foam. Energy, 2020, 211: 119046
Cheng Z D, He Y L, Cui F Q. Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers. Int J Heat Mass Transfer, 2012, 55: 5631–5641
Sreenivasalu Reddy N, Gowreesh Subramanya S, Vishwanath K C, et al. Enhancing the thermal efficiency of parabolic trough collector using rotary receiver tube. Sust Energy Technol Assess, 2022, 51: 101941
Biswakarma S, Roy S, Das B, et al. Performance analysis of internally helically v-grooved absorber tubes using nanofluid. Thermal Sci Eng Prog, 2020, 18: 100538
Shi X, Zhao X, Wang F, et al. Improving overall heat transfer performance of parabolic trough solar receiver by helically convex absorber tube. Appl Thermal Eng, 2022, 213: 118690
Liu P, Wu J, Chen L, et al. Numerical analysis and multi-objective optimization design of parabolic trough receiver with ribbed absorber tube. Energy Rep, 2021, 7: 7488–7503
Bellos E, Tzivanidis C, Tsimpoukis D. Multi-criteria evaluation of parabolic trough collector with internally finned absorbers. Appl Energy, 2017, 205: 540–561
Liu P, Dong Z, Xiao H, et al. A novel parabolic trough receiver by inserting an inner tube with a wing-like fringe for solar cascade heat collection. Renew Energy, 2021, 170: 327–340
Song X, Dong G, Gao F, et al. A numerical study of parabolic trough receiver with nonuniform heat flux and helical screw-tape inserts. Energy, 2014, 77: 771–782
Nait-Ali B, Haberko K, Vesteghem H, et al. Preparation and thermal conductivity characterisation of highly porous ceramics. J Eur Ceramic Soc, 2007, 27: 1345–1350
Liu P, Dong Z, Xiao H, et al. Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection. Energy, 2021, 219: 119566
Zhu X, Zhu L, Zhao J. Wavy-tape insert designed for managing highly concentrated solar energy on absorber tube of parabolic trough receiver. Energy, 2017, 141: 1146–1155
He Y L, Xiao J, Cheng Z D, et al. A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector. Renew Energy, 2011, 36: 976–985
Mullick S C, Nanda S K. An improved technique for computing the heat loss factor of a tubular absorber. Sol Energy, 1989, 42: 1–7
Forristall R. Heat transfer analysis and modeling of a parabolic trough solar receiver implemented in engineering equation solver. Technical Report. NREL/TP-550-34169, National Renewable Energy Laboratory (NREL), 2003
Mwesigye A, Bello-Ochende T, Meyer J P. Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts. Appl Energy, 2014, 136: 989–1003
ANSYS Inc., User’s Guide for FLUENT/UNS and RAMPANT., Release 4.0, vol. 1, 2, and 4. Fluent Incorporated, Lebanon, NH 03766, 1996
Webb R L. Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design. Int J Heat Mass Transfer, 1981, 24: 715–726
Incropera F P, Witt P D, Bergman T L, et al. Fundamentals of Heat and Mass Transfer. 6th ed. New York: John-Wiley & Sons Inc., 2006
Dudley E V, Kolb J G, Sloan M, et al. SEGS LS2 solar collector-test results. Report of Sandia National Laboratory, 1994, SAN94-1884
Kalidasan B, Shankar R, Srinivas T. Absorber tube with internal hinged blades for solar parabolic trough collector. Energy Procedia, 2016, 90: 463–469
Kalidasan B, Boopalan N, Shankar R, et al. Ameliorating heat transfer performance of absorber tube for single axis concentrators. Procedia Tech, 2016, 25: 924–933
Kalidasan B, Shankar R, Srinivas T. Absorber tube with internal pin-fins for solar parabolic trough collector. Asia Conference on Power and Electrical Engineering, 2016, 55: 06004
Chakraborty O, Roy S, Das B, et al. Computational analyses of parabolic trough solar collector in the presence of helical coil-insert. Int J Environ Sci Technol, 2023, 20: 683–702
Muñoz J, Abánades A. Analysis of internal helically finned tubes for parabolic trough design by CFD tools. Appl Energy, 2011, 88: 4139–4149
Bellos E, Tzivanidis C, Tsimpoukis D. Thermal enhancement of parabolic trough collector with internally finned absorbers. Sol Energy, 2017, 157: 514–531
Chakraborty O, Roy S, Das B, et al. Effects of helical absorber tube on the energy and exergy analysis of parabolic solar trough collector—A computational analysis. Sust Energy Technol Assess, 2021, 44: 101083
Yılmaz İ H, Mwesigye A, Göksu T T. Enhancing the overall thermal performance of a large aperture parabolic trough solar collector using wire coil inserts. Sust Energy Technol Assess, 2020, 39: 100696
Mwesigye A, Bello-Ochende T, Meyer J P. Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts. Int J Thermal Sci, 2016, 99: 238–257
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the China Postdoctoral Science Foundation (Grant No. 2020M672344). The authors wish to thank the reviewers for their careful, unbiased and constructive suggestions, which led to this revised manuscript.
Rights and permissions
About this article
Cite this article
Liu, P., Ren, T., Ge, Y. et al. Performance analyses of a novel finned parabolic trough receiver with inner tube for solar cascade heat collection. Sci. China Technol. Sci. 66, 1417–1434 (2023). https://doi.org/10.1007/s11431-022-2201-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-022-2201-3