Abstract
The mechanism of ultraviolet (UV) nanosecond laser cutting of thermoplastic films and the influence of process parameters on process quality are systematically discussed. The photothermal effect plays a dominant role in the interaction between the UV-nanosecond laser and thermoplastic materials. In this photothermal reaction, a heat source with the focal point as the core is formed, around which a thermal carbonization layer, a thermal melting layer, and a thermal expansion layer are formed in order from the inside to the outside. Among them, the thermal carbonization layer is not prevalent, and the thermal melting layer and thermal expansion layer are prevalent. The process quality can be adjusted by adjusting the cutting speed, the laser power, and the repetition number of cuts to regulate the process of heat generation and heat dissipation. In the effective range, the faster the cutting speed and the lower the laser power, the smaller the kerf width and heat-affected zone (HAZ) width. Within a certain range, the depth of kerf can be increased by increasing the repetition number of cuts.
Similar content being viewed by others
References
Pena J R, Hidalgo M, Mijangos C. Plastification of poly(vinyl chloride) by polymer blending. J Appl Polym Sci, 2000, 75: 1303–1312
Ru L, Jie-rong C. Studies on wettability of medical poly(vinyl chloride) by remote argon plasma. Appl Surf Sci, 2006, 252: 5076–5082
Chen J R, Yan J L, Zhang Y Z. Surface modification of medical PVC by remote oxygen plasma. Composite Interfaces, 2004, 11: 123–130
Tao Y. Application and analysis of polycarbonate in automotive lamps. China Plast Indust, 2014, 42: 120–123
Katsamberis D, Browall K, Iacovangelo C, et al. Highly durable coatings for automotive polycarbonate glazing. Prog Org Coatings, 1998, 34: 130–134
Panseri S, Chiesa L M, Zecconi A, et al. Determination of volatile organic compounds (VOCs) from wrapping films and wrapped PDO italian cheeses by using HS-SPME and GC/MS. Molecules, 2014, 19: 8707–8724
Azlin-Hasim S, Cruz-Romero M C, Morris M A, et al. The potential application of antimicrobial silver polyvinyl chloride nanocomposite films to extend the shelf-life of chicken breast fillets. Food Bioprocess Technol, 2016, 9: 1661–1673
Cannarsi M, Baiano A, Marino R, et al. Use of biodegradable films for fresh cut beef steaks packaging. Meat Sci, 2005, 70: 259–265
Riveiro A, Soto R, del Val J, et al. Texturing of polypropylene (PP) with nanosecond lasers. Appl Surf Sci, 2016, 374: 379–386
Song G, Tan D Q. Atomic layer deposition for polypropylene film engineering—A review. Macromol Mater Eng, 2020, 305: 2000127
Gorelov Y P, Mekalina IV, Trigub T S, et al. Chemical modification of transparent acrylate polymers for enhancing the resource of aircraft glazing parts. Russian J General Chem, 2011, 81: 1036–1041
Mishra V, Sharma R, Khatri N, et al. Processing of polycarbonate by ultra-precision machining for optical applications. Mater Today-Proc, 2018, 5: 25130–25138
Wang J, Lou Y, Wang B, et al. Highly sensitive, breathable, and flexible pressure sensor based on electrospun membrane with assistance of AGNW/TPU as composite dielectric layer. Sensors, 2020, 20: 2459
Zhu L, Zhou X, Liu Y, et al. Highly sensitive, ultrastretchable strain sensors prepared by pumping hybrid fillers of carbon nanotubes/cellulose nanocrystal into electrospun polyurethane membranes. ACS Appl Mater Interfaces, 2019, 11: 12968–12977
Zhuang Y, Guo Y, Li J, et al. Study on the forming and sensing properties of laser-sintered TPU/CNT composites for plantar pressure sensors. Int J Adv Manuf Technol, 2021, 112: 2211–2222
Faraji M, Mohammadzadeh Aydisheh H. Rational synthesis of a highly porous PANI-CNTs-PVC film for high performance flexible supercapacitor. ChemElectroChem, 2018, 5: 2882–2892
Wang H, Liu D, Duan X, et al. Facile preparation of high-strength polyaniline/polyvinyl chloride composite film as flexible free-standing electrode for supercapacitors. Mater Design, 2016, 108: 801–806
Shadpour H, Musyimi H, Chen J, et al. Physiochemical properties of various polymer substrates and their effects on microchip electrophoresis performance. J Chromatography A, 2006, 1111: 238–251
Wang S, Liu J, Lv M, et al. A low-cost, high-efficiency and high-flexibility surface modification technology for a black bisphenol a polycarbonate board. Appl Surf Sci, 2014, 314: 679–685
Fan Y Q, Kong X P, Chai D P, et al. Low-cost and flexible film-based digital microfluidic devices. Micro Nano Lett, 2020, 15: 163–165
Xu Z, Jiang F, Xu Z, et al. Novel prototyping method for microfluidic devices based on thermoplastic polyurethane microcapillary film. Microfluid Nanofluid, 2016, 20: 126
White C E, Henderson C L. Development of improved photosensitive polycarbonate systems for the fabrication of microfluidic devices. J Vacuum Sci Tech B, 2003, 21: 2926–2930
Wu C, Zhang T, Zhang J, et al. A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect. Nanoscale Horiz, 2020, 5: 541–552
Wang S. Parameters optimization of plastic nylon parts formed by high speed steel turning tool. J Plast Eng, 2016, 23: 162–165
Wang J, Lou Y Y, Wang B, et al. Highly sensitive, breathable, and flexible pressure sensor based on electrospun membrane with assistance of AGNW/TPU as composite dielectric layer. Sensors, 2020, 20: 2459
Cheng X, Pan F, Wang M, et al. Hybrid membranes for pervaporation separations. J Membrane Sci, 2017, 541: 329–346
Xue B, Geng Y, Yan Y, et al. Rapid prototyping of microfluidic chip with burr-free pmma microchannel fabricated by revolving tip-based micro-cutting. J Mater Processing Tech, 2019, 277: 116468
Zhu Z, Buck D, Guo X, et al. Effect of cutting speed on machinability of stone-plastic composite material. Sci Adv Mater, 2019, 11: 884–892
Majumder H, Maity K. Application of GRNN and multivariate hybrid approach to predict and optimize WEDM responses for Ni-Ti shape memory alloy. Appl Soft Computing, 2018, 70: 665–679
Lo J S, Jiang C T, Wu K L. Effect of slotted electrodes on improvement in machining performance of large-scale electrical discharge machining. Proc Institution Mech Engineers Part B-J Eng Manufacture, 2019, 233: 756–765
Zhuang G, Li G Q, Li J, et al. Progress of the CFETR design. Nucl Fusion, 2019, 59: 112010
Chiromawa N L, Ibrahim K. Fabrication of micro-array of fresnel rings on Si by electron beam lithography and reactive ion etching. Appl Phys A-Mater Sci Process, 2016, 122: 129
Trieb F H. Waterjet cutting: State of the art and future trends. In: Proceedings of Pressure Vessels and Piping Conference of the American-Society-of-Mechanical-Engineers. Denver, CO, 2005. 5: 91–95
Jiang H, Meng D G. Experimental research on the specific energy consumption of rock breakage using different waterjet-assisted cutting heads. Adv Mater Sci Eng, 2018, 2018: 3853980
Veiko V, Karlagina Y, Moskvin M, et al. Metal surface coloration by oxide periodic structures formed with nanosecond laser pulses. Optics Lasers Eng, 2017, 96: 63–67
Shanjin L, Yang W. An investigation of pulsed laser cutting of titanium alloy sheet. Optics Lasers Eng, 2006, 44: 1067–1077
Yang L J, Wang Y, Tian Z G, et al. Yag laser cutting soda-lime glass with controlled fracture and volumetric heat absorption. Int J Machine Tools Manufacture, 2010, 50: 849–859
Ito Y, Yoshizaki R, Miyamoto N, et al. Ultrafast and precision drilling of glass by selective absorption offiber-laser pulse into femtosecond-laser-induced filament. Appl Phys Lett, 2018, 113: 061101
Luo Y, Wang X, Wu D. Quality investigation of alumina ceramic laser cutting based on vapor-to-melt ratio. J Laser Appl, 2018, 30: 032002
Xing Y, Luo C, Wan Y, et al. Formation of bionic surface textures composed by micro-channels using nanosecond laser on Si3N4-based ceramics. Ceramics Int, 2021, 47: 12768–12779
Wu C, Rong Y, Yang R. Thermal ablation regulation for ultraviolet (UV) nanosecond laser precision cutting of polycarbonate (PC) film. Optics Laser Tech, 2021, 143: 107365
Wu C, Rong Y, Huang Y, et al. Precision cutting of polyvinyl chloride film by ultraviolet nanosecond laser. Mater Manufacturing Processes, 2021, 36: 1650–1657
Xin G, Rong Y, Huang Y, et al. Process and mechanism of cutting thermoplastic polyurethane (TPU) film by nanosecond ultraviolet laser. J Mater Sci, 2021, 56: 16167–16180
Wu C, Rong Y, Li M, et al. High-quality cutting of Polypropylene (PP) film by UV nanosecond laser based on thermal ablation. Optics Laser Tech, 2022, 147: 107600
Rong Y, Huang Y, Lin C, et al. Stretchability improvement of flexiable electronics by laser micro-drilling array holes in PDMS film. Optics Lasers Eng, 2020, 134: 106307
Wu C, Xu J, Zhang T, et al. Precision cutting of PDMS film with UV-nanosecond laser based on heat generation-diffusion regulation. Optics Laser Tech, 2022, 145: 107462
Rong Y, Huang Y, Li M, et al. High-quality cutting polarizing film (POL) by 355 nm nanosecond laser ablation. Optics Laser Tech, 2021, 135: 106690
Langdon G S, Gabriel S, von Klemperer C J, et al. Transient response and failure of medium density fibreboard panels subjected to air-blast loading. Composite Struct, 2021, 273: 114253
Pramanik D, Kuar A S, Sarkar S, et al. Optimisation of edge quality on stainless steel 316L using low power fibre laser beam machining. Adv Mater Processing Technol, 2021, 7: 42–53
Seo Y, Lee D, Pyo S. High-power fiber laser cutting for 50-mm-thick cement-based materials. Materials, 2020, 13: 1113
Hu J, Zhu D. Experimental study on the picosecond pulsed laser cutting of carbon fiber-reinforced plastics. J Reinforced Plasts Compos, 2018, 37: 993–1003
Madić M, Mladenović S, Gostimirović M, et al. Laser cutting optimization model with constraints: Maximization of material removal rate in CO2 laser cutting of mild steel. Proc Institution Mech Engineers Part B-J Eng Manufacture, 2020, 234: 1323–1332
Mushtaq R T, Wang Y, Rehman M, et al. State-of-the-art and trends in CO2 laser cutting of polymeric materials—A review. Materials, 2020, 13: 3839
Xin G, Wu C, Cao H, et al. Superhydrophobic TC4 alloy surface fabricated by laser micro-scanning to reduce adhesion and drag resistance. Surf Coatings Tech, 2020, 391: 125707
Zhang W, Li R, Zheng H, et al. Laser-assisted printing of electrodes using metal-organic frameworks for micro-supercapacitors. Adv Funct Mater, 2021, 31: 2009057
Adelmann B, Hellmann R. Rapid micro hole laser drilling in ceramic substrates using single mode fiber laser. J Mater Processing Tech, 2015, 221: 80–86
Yu Z, Hu J, Li K. Investigating the multiple-pulse drilling on titanium alloy in picosecond laser. J Mater Processing Tech, 2019, 268: 10–17
Chen N, Li H N, Wu J, et al. Advances in micro milling: From tool fabrication to process outcomes. Int J Machine Tools Manufacture, 2021, 160: 103670
Nordin I, Okamoto Y, Okada A, et al. Effect of wavelength and pulse duration on laser micro-welding of monocrystalline silicon and glass. Appl Phys A, 2016, 122: 400
Tur A, Cordovilla F, García-Beltrán Á, et al. Minimization of the thermal material effects on pulsed dynamic laser welding. J Mater Processing Tech, 2017, 246: 13–21
Murakami A, Kitano H, Adachi H, et al. Universal processing technique for protein crystals using pulsed UV laser. Japanese J Appl Phys Part 2-Lett Exp Lett, 2004, 43: L873–L876
Niino H, Kurosaki R, Gu B, et al. Laser cutting of carbon fiber reinforced plastics (CFRP) by UV pulsed laser ablation. In: Proceedings of Conference on Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI. San Francisco, CA, 2011.792019
Lassithiotaki M, Athanassiou A, Anglos D, et al. Photochemical effects in the UV laser ablation of polymers: Implications for laser restoration of painted artworks. Appl Phys A-Mater Sci Process, 1999, 69: 363–367
Schmidt H, Ihlemann J, Wolff-Rottke B, et al. Ultraviolet laser ablation of polymers: Spot size, pulse duration, and plume attenuation effects explained. J Appl Phys, 1998, 83: 5458–5468
Yingling Y G, Garrison B J. Photochemical induced effects in material ejection in laser ablation. Chem Phys Lett, 2002, 364: 237–243
Zagdoun A, Casano G, Ouari O, et al. Large molecular weight nitroxide biradicals providing efficient dynamic nuclear polarization at temperatures up to 200 K. J Am Chem Soc, 2013, 135: 12790–12797
Reta D, Chilton N F. Uncertainty estimates for magnetic relaxation times and magnetic relaxation parameters. Phys Chem Chem Phys, 2019, 21: 23567–23575
Semak V, Matsunawa A. The role of recoil pressure in energy balance during laser materials processing. J Phys D-Appl Phys, 1999, 30: 2541–2552
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant Nos. 52005206 & 51905191), the China Postdoctoral Science Foundation (Grant No. 2020TQ0110), the Ministry of Industry and Information Technology’s Special Project for High-quality Development of the Manufacturing Industry (Grant No. TC200H02H), the National Key R&D Program of China (Grant No. 2020YFB2007600), the Key Research & Development Plan of Hubei Province (Grant No. 2020BAB051), Guangdong HUST Industrial Technology Research Institute, Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization (Grant No. 2020B1212060014), and Guangdong Basic and Applied Basic Research Foundation (Grant No. 2020A1515011393).
Rights and permissions
About this article
Cite this article
Wu, C., Rong, Y., Huang, Y. et al. Laser cutting of thermoplastic film: Mechanism and processing technology. Sci. China Technol. Sci. 65, 2068–2078 (2022). https://doi.org/10.1007/s11431-022-2104-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-022-2104-5