Abstract
Open-celled metal foams fabricated through metal sintering offers novel mechanical, thermal and acoustic properties. Previously, polymer foams were used as a means of absorbing acoustic energy. However, the structural applications of these foams are inherently limited. The metal sintering approach provides a cost-effective means for the mass-production of open-cell foams from a range of materials, including high-temperature steel alloys. The low Reynolds number fluid properties of sintered steel alloy (FeCrAlY) foams were investigated in a previous study. The static flow resistance of the foams was modeled based on a cylinder and a sphere arranged in a periodic lattice at general incidence to the flow, with the resulting predictions correlating well to measurements. The application of the flow resistance in an acoustic model is the primary focus of the present study. The predictions for the static flow resistance of the sintered foams are first used in a theoretical model to determine the characteristic impedances, as well as the propagation constants of the foams. Subsequently, the predicted acoustic performance of the foams is compared to experimental results. Finally, the design space for a simple acoustic absorber incorporating sintered foams is examined, with the effects of absorber size, foam selection, and foam spacing explored.
Similar content being viewed by others
References
Zhao C Y, Kim T, Lu T J, et al. Thermal transport in high porosity cellular metal foams. AIAA J Thermofluid Phys, 2004, 18(2): 309–317
Kepets M, Lu T J, Dowling A P. Mechanical characterization of the role of defects in sintered FeCrAlY foams. Acta Mechanica Sinica, 2007, 23(2): 383–398
Ashby M F, Lu T J. Metal foams: A survey. Sci China Ser B-Chem Sci, 2003, 46: 521–532
Lu T J, Kepets M, Dowling A P. Static flow resistance of sintered FeCrAlY foams with open cells: I. Static flow resistance. Sci China Ser E-Tech Sci, 2008, 51(11): 1803–1811
Morse P M, Ingard K U. Theoretical Acoustics. USA: McGraw Hill, 1968
Baron R. The Theory of Sound. USA: Dover Publications, 1945
Zwikker C, Kosten C W. Sound Absorbing Materials. United Kingdom: Elsevier Publishing Company Inc., 1949
Biot M A. Theory of propagation of elastic waves in a fluid saturated porous solid. ii. high-frequency range. J Acoust Soc Am, 1956, 28(1): 179–191
Lambert R F. The acoustical structure of highly porous open-cell foams. J Acoust Soc Am, 1982, 72(2): 879–887
Wilson D K. Relaxation-matched modeling of propagation through porous media, including fractal pore structure. J Acoust Soc Am, 1993, 94(3): 1136–1145
Attenborough K. Acoustical characteristics of rigid fibrous absorbents and granular materials. J Acoust Soc Am, 1983, 73(2): 785–799
Champoux Y, Stinson M R. On acoustical models for sound propagation in rigid frame porous materials and the influence of shape factors. J Acoust Soc Am, 1992, 92(3): 120–1131
Dupère I D J, Lu T J, Dowling A P. Acoustic properties. In: Colombo P, Scheffler M, eds. Cellular Ceramics: Structure, Manufacturing, Properties and Applications. Weinheim: WILEY-VCH, 2005. 381–399
Allard J F, Champoux Y. New empirical equations for sound propagation in rigid frame fibrous materials. J Acoust Soc Am, 1992, 91(12): 3346–3353
Brennan M J, To W M. Acoustic properties of rigid-frame porous materials and engineering perspective. Appl Acoust, 2001, 62(3): 793–811
Takahara H. Sound insulating characteristics of porous ceramic Al2O3-SiO2. Appl Acoust, 1982, 15(1): 111–116
Delany M E, Bazley E N. Acoustical properties of fibrous absorbent materials. Appl Acoust, 1970, 3(1): 105–116
Wu Q. Empirical relations between acoustical properties and flow resistivity of porous plastic open-cell foams. Appl Acoust, 1988, 25(1): 141–148
Kirby R, Cummings A. Prediction of the bulk acoustic properties of fibrous materials at low frequencies. Appl Acoust, 1999, 56(1): 101–125
Ling M K. Impedance of polyurethane foams. Appl Acoust, 1991, 34(2): 221–224
Muehleisen R T, Beamer C W, Tinianov B D. Measurements and empirical model of the acoustic properties of reticulated vitreous carbon. J Acoust Soc Am, 2005, 117(2): 536–544
Voronina N. An empirical model for rigid frame porous materials with high porosity. Appl Acoust, 1997, 51(2): 181–198
Wang X, Lu T J. Optimized acoustic properties of cellular solids. J Acoust Soc Am, 1999, 106(3): 756–765
Lu T J, Chen F, He D. Sound absorption of cellular metals with semiopen cells. J Acoust Soc Am, 2000, 108(5): 1697–1709
Han F, Seiffert G, Zhao Y, et al. Acoustic absorption behavior of an open-celled aluminum foam. J Phy D: Appl Phy, 2003, 36(2): 294–302
Dowling A P, Ffowcs Williams J E. Sound and Sources of Sound. United Kingdom: Ellis Horwood, 1989
Lamb H. Hydrodynamics. United States: Dover Publications, 1945
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the National Basic Research Program of China (Grant Nos. 2006CB601202, 2006CB601204), the National 111 Project of China (Grant No. B06024), US Office of Naval Research (Grant No. N000140210117), the National Natural Science Foundation of China (Grant Nos. 10572111, 10632060), and the National H-Tech Research and Development Program of China (Grant No. 2006AA03Z519)
Rights and permissions
About this article
Cite this article
Lu, T., Kepets, M. & Dowling, A.P. Acoustic properties of sintered FeCrAlY foams with open cells (II): Sound attenuation. Sci. China Ser. E-Technol. Sci. 51, 1812–1837 (2008). https://doi.org/10.1007/s11431-008-0112-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-008-0112-y