Abstract
A new nano-assembly approach has been proposed for the preparation of macropore volume mesoporous aluminum oxide supports. Secondary nano-assembly and a frame structure mechanism for large pore volume mesoporous supports have been proposed. In a primary nano-assembly supersoluble micelle, aluminum hydroxide nanoparticles were precipitated in situ in surfactants with a volume balance (VB) less than 1, followed by secondary nano-assembly in linear and cylindrical shapes. The secondary nano-assembly of cylindrical aluminum hydroxides was calcined to form nano cylindrical aluminum oxides. For the formation of macropore volume mesoporous supports, we utilized a frame structure mechanism of mesoporous support, in which the exterior surface of the carrier may not be continuous. This macropore volume support has been used for the hydrotreatment of a residual oil catalyst, which possesses the following physical characteristics: pore volume 1.8–2.7 mL·g−1, specific surface area 180–429 m2·g−1, average pore diameter 17–57 nm, average pore diameter more than 10 nm (81%–94%), porosity 87%–93%, and crush strength 7.7–25 N·mm−1.
Similar content being viewed by others
References
Onuma K, Kobayashi H, Suzuki M. Hydrotreating catalysts for heavy oils (part 1): Preparation and activity of bimodal alumina based catalyst for desulfurization and demetallation. J Japan Petro Inst, 1984, 27(4): 348–355
Yang Q, Li D, Zhuang F, Shi Y, Kang X. Effect of NH4HCO3 on pore structure of alumina. Chin J Cata, 1999, 20(2): 139–144
Ono T, Ohguchi Y, Togari O. Control of the pore structure of porous alumina. Stud Surf Sci Catal, 1983, 16: 631–641
Holland B T, Blanford C F, Stein A. Synthesis of macroporous minerals with highly ordered three-dimensional arrays of spheroidal voids. Science, 1998, 281: 538–540
Imhof A, Pine D J. Ordered macroporous materials by emulsion eplating. Nature, 1997, 389: 948–951
Beck J S, Vartuli J C, Roth W J, Leonowicz M E, Kresge C T, Schmitt K D, Chu C T-W, Olson D H, Sheppard E W, McCullen S B, Higgins J B, Schlenker J L. A new family of mesoporous molecular sieves prepared with liquid crystal templates. J Am Chem Soc, 1992, 114: 10834–10843
Vartuli J C, Kresge C T, Leonowicz M E, Chu A S, McCullen S B, Johnson I D, Sheppard E W. Synthesis of mesoporous materials: liquid-crystal templating versus intercalation of layered silicates. Chem Mater, 1994, 6: 2070–2077
Peterson I. The honeycomb conjecture. Science News, 1999, 156: 60
Weaire D, Phelan R. A counter-example to Kelvin’s conjecture on milinimal-surfaces. Philos Mag Lett, 1994, 69: 107–110
Xu R, Pang W, Yu J, Huo Q, Chen J. Chemistry-zeolites and Porous Materials (in Chinese). Beijing: Science Press. 2004. 578–579
Ravikovitch P I, Neimark A V. Density functional theory of adsorption in spherical cavities and pore size characterization of templated nanoporous silicas with cubic and three-dimensional hexagonal structures. Langmuir. 2002, 18: 1550–1560
Zhao D Y, Feng J L, Huo Q S. Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores. Science, 1998, 279: 548–552
Wang D. In situ synthesis of nanoparticles via supersolubilizing micelle self-assembly. Sci China Ser B-Chem, 2007, 50(1): 105–113
Wang D, Sun W. A preparation method of nano Al2O3. CN200510046482.5, 2005-05-18
Wang D. A study of identifying the emulsion type of surfactant: volume balance value. J Colloid Interf Sci, 2002, 247(2): 389–396
Israelachvili J N. Intermolecular and Surface Forces. London: Academic Press, 1991
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, D. Large pore volume mesoporous aluminum oxide synthesized via nano-assembly. Sci. China Ser. B-Chem. 52, 2114–2124 (2009). https://doi.org/10.1007/s11426-009-0290-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11426-009-0290-x