Abstract
Purpose
Many analogs of lysergic acid diethylamide (LSD) have recently appeared as designer drugs around the world. These compounds are mainly distributed as sheet products. In this study, we identified three more newly distributed LSD analogs from paper sheet products.
Methods
The structures of the compounds were determined by gas chromatography–mass spectrometry (GC–MS), liquid chromatography–photodiode array–mass spectrometry (LC–PDA–MS), liquid chromatography with hybrid quadrupole time-of-flight mass spectrometry (LC–Q-TOF-MS) and nuclear magnetic resonance (NMR) spectroscopy.
Results
From the NMR analysis, the compounds in the four products were identified as 4-(cyclopropanecarbonyl)-N,N-diethyl-7-(prop-2-en-1-yl)-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1cP-AL-LAD), 4-(cyclopropanecarbonyl)-N-methyl-N-isopropyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo-[4,3-fg]quinoline-9-carboxamide (1cP-MIPLA), N,N-diethyl-7-methyl-4-pentanoyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1V-LSD) and (2’S,4’S)-lysergic acid 2,4-dimethylazetidide (LSZ). In comparison with the structure of LSD, 1cP-AL-LAD was converted at the positions at N1 and N6, and 1cP-MIPLA was converted at the positions at N1 and N18. The metabolic pathways and biological activities of 1cP-AL-LAD and 1cP-MIPLA have not been reported.
Conclusions
This is the first report showing that LSD analogs that were converted at multiple positions have been detected in sheet products in Japan. There are concerns about the future distribution of sheet drug products containing new LSD analogs. Therefore, the continuous monitoring for newly detected compounds in sheet products is important.
Avoid common mistakes on your manuscript.
Introduction
The regulation of a drug of abuse leads to the emergence of other compounds with partially altered structures. Consequently, new and unregulated synthetic cannabinoids, cathinones and fentanyl derivatives are continuously emerging. This so-called ‘cat-and-mouse’ game is still ongoing.
Recently, many lysergic acid diethylamide (LSD) [1] analogs have appeared as designer drugs throughout the world [2, 3]. These compounds are mainly distributed as sheet products. LSD analogs such as N,N-7,-triethyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (ETH-LAD) and 7-Allyl-N,N-diethyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (AL-LAD), in which the methyl group at the N6 position of LSD is changed, and 4-Acetyl-N,N-diethyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (ALD-52), N,N-diethyl-7-methyl-4-propionyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1P-LSD), 4-cyclopropionyl-N,N-diethyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1cP-LSD) and 4-butyryl-N,N-diethyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1B-LSD), in which the N1 position is acylated, have been reported [4,5,6,7,8,9,10] (Fig. 1). It has been reported that deacylation of these N1-acylated LSD analogs occurs in vivo [11]. Recently, a new N1-acylated LSD analog, N,N-diethyl-7-methyl-4-pentanoyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1V-LSD), was reported, and head-twitch response studies of 1V-LSD in mice have been reported to show a dose-dependent increase similar to that of LSD [12].
In this paper, we describe the analyses and identification of four LSD analogs in from paper sheet products obtained between 2021 and 2022 in Japan.
Materials and methods
Chemicals
HPLC-grade acetonitrile and methanol were purchased from Kanto Chemical Co., Inc. (Tokyo, Japan). Methanol-d4 (99.8 at. % D) was purchased from Isotec, Inc. (Miamisburg, OH, USA). LSD was purchased from Cerilliant Corporation (Round Rock, TX, USA). (2’S,4’S)-Lysergic acid 2,4-dimethylazetidide (LSZ) was purchased from Chiron (Trondheim, Norway). Bond Elut C18, 500 mg, 3 mL (Agilent, Santa Clara, CA, USA) was used for purification.
Samples
The four products (A to D) analyzed in this study were obtained in Japan between August 2021 and March 2022. Each sheet was a square with an overall size of 4.5 × 4.5 cm and perforated in a grid pattern with approximately 9 mm on each side. The structural formula of the LSD analog suggested to be contained was printed on one side of the sheet, and the name of the compound was printed on the reverse side.
Sample preparation
Eight mg of each sheet cut into 2 mm squares was extracted with 1 mL of methanol in 15 min under sonication. Methanol was removed from the extract under a nitrogen stream and redissolved in 1 mL of acetonitrile for analysis by gas chromatography–mass spectrometry (GC–MS), liquid chromatography–photodiode array–mass spectrometry (LC–PDA–MS) and liquid chromatography with hybrid quadrupole time-of-flight mass spectrometry (LC–Q-TOF-MS). For nuclear magnetic resonance (NMR) spectroscopy, each piece of a cut sheet was sonicated in 1.0 mL of methanol at room temperature for 5 min. The extraction procedure was repeated three times. The extracts were combined and the solvent was removed using an evaporator. Each residue was purified with Bond Elut C18 eluted with water–methanol, dissolved in 0.3 mL of methanol-d4, and then subjected to NMR spectroscopy.
LC–PDA–MS conditions
The LC–PDA–MS analysis was performed on an ACQUITY UPLC system with a mass detector and a photodiode array (PDA) detector (Waters, Milford, MA, USA). Chromatographic separation was performed using an ACQUITY HSS T3 (2.1 mm i.d. × 100 mm, 1.8 μm particle size, Waters) UPLC column protected by Van Guard HSS T3 (2.1 mm i.d. × 5 mm, 1.7 μm particle size, Waters) at 40 °C. For the LC–MS analysis, we employed a binary mobile phase of solvent A (0.1% formic acid in water) and solvent B (0.1% formic acid in acetonitrile). The samples were analyzed by the following elution program: 5–20% B (0–20 min) and then up to 80% B (20–30 min, 10-min hold) at a flow rate of 0.3 mL/min. The injection volume was 1 μL and the wavelength of the PDA detector for screening was set from 210 to 450 nm. The MS conditions for the LC–ESI-MS were as follows: positive and negative ionization, nitrogen desolvation gas (flow rate 650 L/h at 350 °C), capillary and cone voltages of 2500 V and 30 V, respectively, and mass spectral range m/z 120–650 [9, 10].
GC–MS conditions
The GC–MS was performed on an Agilent 6890 N GC system with a 5975 mass-selective detector (Agilent Technologies, Santa Clara, CA, USA) using a capillary column (DB-1HT capillary, 15 m × 0.25 mm i.d., 0.10-μm film thickness; Agilent Technologies) with helium-gas carrier flowing at 1.0 mL/min. The conditions were as follows: electron energy, 70 eV; injector temperature, 200˚C; injection mode, splitless mode for 1.0 min; transfer line temperature, 280˚C; scan range, m/z 40–550. The oven temperature was held at 120˚C for 1 min, and then increased at 15˚C/min to 280˚C, where it was held for 5 min [9, 10].
HR-MS analysis conditions
The HR-MS analysis was carried out on a TripleTOF® 6600 LC/MS/MS system (AB SCIEX, Framingham, MA, USA) and a Nexera X2 system (Shimadzu, Kyoto, Japan). Chromatographic separation was performed in an ACQUITY HSS T3 (2.1 mm i.d. × 100 mm, 1.8 μm particle size, Waters) UPLC column protected by Van Guard HSS T3 (2.1 mm i.d. × 5 mm, 1.7 μm particle size, Waters) at 40 °C. The mobile phase was a binary phase of solvent A (0.1% formic acid in water) and solvent B (0.1% formic acid in acetonitrile) with a gradient program of A/B 95/5–5/95 (10 min, 2 min hold). The flow rate was 0.3 mL/min, and the elution was monitored at 210–450 nm. The mass spectrometer was operated in ESI mode with an ion-spray voltage of 5500 V (positive mode), a source temperature of 550 °C, an ion-source gas of nitrogen, a pressure of 50 psi for ion-source gases 1 and 2, a curtain gas pressure of 25 psi, and a declustering potential of 80 V. The samples were analyzed in TOF-MS scan mode (m/z 100–650) [9, 10].
NMR spectrometry and parameters
The 1H-NMR and 13C-NMR spectra were measured using a JEOL JMN-ECA800 or ECZ800 spectrometer (JEOL, Tokyo, Japan). The chemical shifts were presented with reference to the residual deuterated methanol (CD3OD, δH 3.33 ppm and δC 49.0 ppm) in the NMR. Compound identification was performed using 1H-NMR, 13C-NMR, heteronuclear multiple quantum coherence (HMQC), heteronuclear multiple bond correlation (HMBC), H–H correlation spectroscopy (H–H COSY) and nuclear Overhauser effect spectroscopy (NOESY).
Results
Analysis of sheet product A
In the LC–PDA–MS analysis of product A, the peak for compound 1 was detected at 16.0 min with a protonated molecular ion ([M + H]+) at m/z 418 (Fig. 2a and b). In the GC–MS analysis, the peak at 13.4 min indicated a molecular ion ([M]+) at m/z 417 (Fig. 3a, b). The accurate mass spectrum of compound 1 displayed an ion peak at m/z 418.2490, and the estimated composition of the protonated molecular formula was C26H32N3O2 (calc 418.2489 (0.1 mDa)). The 13C-NMR spectra indicated the existence of another carbonyl (δC 174.4 ppm) in addition to the amide portion of the LSD. Two methylene signals [(δH 1.10 ppm, δC 10.1 ppm), (δH 1.19 ppm, δC 10.1 ppm)] and one methine signal (δH 2.50 ppm, δC 14.4 ppm) were also observed, and 2D NMR correlations revealed the presence of cyclopropanecarbonyl at the N1 position of LSD (Fig. 4). The 1H-NMR and 13C-NMR shift values of compound 1 were almost the same as those of 1cP-LSD, except for positions 5 and 7. The molecular weight of compound 1 was 26 more than that of 1cP-LSD, and the presence of a partial structure [CH = CH2 (δH 6.01 ppm, δC 134.7 ppm), CH = CH2 (δH 5.28, 5.35 ppm, δC 119.9 ppm)], which appeared to be a terminal olefin, suggested the presence of an allyl group (Tables 1, 2). The methyl group at N6 was not observed, and correlations were observed between the methylene protons of the allyl group and the carbons at positions 5 and 7, as shown in Fig. 4, indicating that there is an allyl group at position 6 rather than a methyl group. Thus, the structure of compound 1 was determined as 4-(cyclopropanecarbonyl)-N,N-diethyl-7-(prop-2-en-1-yl)-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1cP-AL-LAD (1)), as shown in Fig. 1.
Analysis of sheet product B
In the LC–PDA–MS analysis of product B, a peak of compound 2 was detected at 13.7 min with a protonated molecular ion ([M + H]+) at m/z 392 (Fig. 5a, b). In the GC–MS analysis, a peak at 13.0 min revealed a molecular ion ([M]+) at m/z 391 (Fig. 6a, b). The accurate mass spectrum of compound 2 revealed an ion peak at m/z 392.2333, and the estimated composition of the protonated molecular formula was C24H30N3O2 [calc 392.2333 (0 mDa)]. The NMR spectroscopic data showed the presence of another carbonyl (δC 174.4 ppm), two methylenes [(δH 1.10 ppm, δC 10.1 ppm), (δH 1.19 ppm, δC 10.1 ppm)] and one methine (δH 2.50 ppm, δC 14.4 ppm) in addition to the LSD moiety, and they were correlated in 2D NMR spectrum, as shown in Fig. 4. Thus, compound 3 is presumed to be cyclopropionylation at the N1 position, as is 1cP-AL-LAD (1). Two doublet methyl [(δH 1.15 ppm, δC 19.5 ppm), (δH 1.19 ppm, δC 19.5 ppm)] and methine (δH 4.82 ppm, δC 46.2 ppm) signals were observed, suggesting the presence of isopropyl groups (Table 1 and 2). One singlet methyl (δH 3.05 ppm, δC 29.1 ppm) was observed, but no signal derived from the diethyl group at the N18 of LSD was observed. The correlation shown in Fig. 4 indicates that the N18 position of LSD is not a diethyl group but methyl and isopropyl groups. Thus, the structure of compound 2 was determined as 4-(cyclopropanecarbonyl)-N-methyl-N-isopropyl-7-methyl-4,6,6a,7,8,9-hexahydroindolo-[4,3-fg]quinoline-9-carboxamide (1cP-MIPLA (2)), as shown in Fig. 1.
In the 1H-NMR and 13C-NMR spectra, there are minor signals at positions 7–9 and at the N-methyl-N-isopropyl moiety. As the ratios of these minor signals were changed in different solvents and the same phenomenon was observed for MIPLA, it was presumed that these minor signals were derived from the rotational isomer of the N18 amide moiety of 1cP-MIPLA.
In the LC–PDA–MS analysis, a peak of 2b with the same m/z 392 [M + H]+ as 1cP-MIPLA was detected at 15.8 min (Fig. 5b), in addition to the peak of 1cP-MIPLA. The UV spectrum of 2b was not similar to that of 1cP-MIPLA. In addition, the signals presumed to be derived from minor compounds other than 1cP-MIPLA were also observed in the 1H-NMR and 13C-NMR spectra. It has been reported that the epimerization of LSD at position 8 occurs to produce iso-LSD [13, 14]. As epimerization at position 8 also occurs during the synthesis of LSD analogs [15], this minor compound was presumed to be iso-1cP-MIPLA.
Analysis of sheet product C
In the LC–PDA–MS analysis of product C, a peak of compound 3 was detected at 18.0 min with a protonated molecular ion ([M + H]+) at m/z 408 (Fig. 7a, b). In the GC–MS analysis, the peak at 13.0 min revealed a molecular ion ([M]+) at m/z 407 (Fig. 8a, b). The accurate mass spectrum of compound 3 contained an ion peak at m/z 408.2647, and the estimated composition of the protonated molecule formula was C26H32N3O2 (calc 408.2646 (0.1 mDa)). The NMR spectroscopic data showed the presence of another carbonyl (δC 173.8 ppm), three methylenes [(δH 2.97 ppm, δC 36.2 ppm), (δH 1.78 ppm, δC 28.0 ppm), (δH 1.48 ppm, δC 23.4 ppm)], and one methyl (δH 0.99 ppm, δC 14.2 ppm) in addition to the LSD moiety, and they were correlated in the 2D NMR spectra, as shown in Fig. 4. The data suggested the presence of a pentanoyl group. The chemical shift values of 1H-NMR and 13C-NMR spectra were in good agreement with those of 1B-LSD (Tables 1 and 2). As the estimated compositional formula of compound 3 contains more CH2 than that of 1B-LSD, and the correlation was observed, as shown in Fig. 4, the N1 position of LSD was presumed to be pentanoylated. Thus, the structure of compound 3 was determined as N,N-diethyl-7-methyl-4-pentanoyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide (1V-LSD (3)) [12], as shown in Fig. 1.
In the LC–PDA–MS analysis, a peak of 3b with the same m/z 392 [M + H]+ as 1V-LSD was detected at 20.7 min (Fig. 7b) in addition to the peak of 1V-LSD. The UV spectrum of 3b was not similar to that of 1V-LSD. Moreover, the signals presumed to be derived from minor compound other than 1V-LSD were also observed in the 1H-NMR and 13C-NMR spectra. This minor compound was estimated to be iso-1V-LSD, C8-epimerized 1V-LSD.
Analysis of sheet product D
In the LC–PDA–MS analysis of sheet D, a peak of compound 4 was detected at 6.8 min with a protonated molecular ion ([M + H]+) at m/z 336 (Fig. S1). In the GC–MS analysis, a peak at 11.4 min showed a molecular ion ([M]+) at m/z 335 (Fig. S2a and S2b). After comparing the data from LC–PDA–MS and GC–MS analyses with those of the authentic compound, this compound was identified as LSZ (4) [5, 16], a compound in which the diethyl moiety at position N18 of LSD has been converted to 2,4-dimethylazetidin.
Discussion
Based on the structure of LSD, the detected compound, 1cP-AL-LAD, was speculated to be converted at the positions at N1 and N6, and 1cP-MIPLA be converted at the positions at N1 and N18. This is the first report in which LSD analogs that have been converted at multiple positions have been detected in sheet products in Japan.
It has been reported that N1-acylated LSD analogs in methanol solutions are partially deacylated during GC–MS analysis [9, 10, 15]. In this study, we observed the partial deacylation of 1V-LSD, but not of 1cP-AL-LAD and 1cP-MIPLA under the same conditions. The reason that 1cP-AL-LAD and 1cP-MIPLA were not deacylated could also be conceived, because they were also modified with N6 or N18. However, Simon et al. reported that 1P-AL-LAD, converted at the N1 and N6 positions, was partially deacylated to AL-LAD during GC–MS analysis [15]. Therefore, 1cP-AL-LAD and 1cP-MIPLA may also be partially deacylated depending on the GC–MS analysis conditions. Halberstadt et al. [11] reported that high concentrations of LSD were detected in the plasma of rats after the subcutaneous administration of ALD-52 and 1P-LSD. 1V-LSD might be deacylated in vivo and may function as a prodrug of LSD. The products containing these prodrug-type compounds might cause health damage, similar to LSD.
It has been reported that under alkaline conditions, approximately 10% of LSD is epimerized to iso-LSD after prolonged heat exposure [13, 14]. In addition, the C8-epimerization of 1P-AL-LAD during GC–MS analysis was reported by Simon et al. [15]. In this study, the presence of iso-1cP-MIPLA and iso-1V-LSD was suggested, and C8-epimerization of other LSD analogs may also occur. The metabolic pathway and biological activities of 1cP-AL-LAD and 1cP-MIPLA have not been reported.
Conclusions
This is the first report showing that LSD analogs that were converted at multiple positions have been detected in sheet products in Japan. In this report, we analyzed LSD analogs in four sheet products. As a results, we identified three compounds as 1cP-AL-LAD, 1cP-MIPLA, and 1V-LSD by NMR analyses, one compound as LSZ by comparison of the data with the authentic compound. The possibility of deacylation in vivo and the conversion into AL-LAD or MIPLA should be further investigated. In addition, there are concerns about the future distribution of sheet drug products containing new LSD analogs. Therefore, the continuous monitoring of newly detected compounds in sheet products is important.
Data availability
All data generated or analyzed during this study are included in this published article and its supplementary material files.
References
Stoll A, Hoffmann A (1943) Partialsynthese von Alkaloiden vom Typus des Ergobasins. (6. Mitteilung über Mutterkornalkaloide). Helv Chim Acta 26:944–965
EMCDDA (2016) EMCDDA–Europol 2016 Annual Report on the implementation of Council Decision 2005/387/JHA. EMCDDA-Europol, Lisbon, July 2017 http://www.emcdda.europa.eu/system/files/publications/4724/TDAN17001ENN_PDFWEB.pdf. Accessed 11 May 2020.
EMCDDA (2017) EMCDDA–Europol 2017 Annual Report on the implementation of Council Decision 2005/387/JHA. EMCDDA-Europol, Lisbon, February 2018: http://www.emcdda.europa.eu/system/files/publications/9282/20183924_TDAN18001ENN_PDF. .pdf. Accessed 11 May 2020.
Brandt SD, Kavanagh PV, Westphal F, Stratford A, Elliott SP, Hoang K, Wallach J, Halberstadt AL (2016) Return of the lysergamides Part I: Analytical and behavioural characterization of 1-propionyl-d-lysergic acid diethylamide (1P-LSD). Drug Test Anal 8:891–902
Brandt SD, Kavanagh PV, Westphal F, Elliott SP, Wallach J, Colestock T, Burrow TE, Chapman SJ, Stratford A, Nichols DE, Halberstadt AL (2017) Return of the lysergamides. Part II: analytical and behavioural characterization of N6-allyl-6-norlysergic acid diethylamide (AL-LAD) and (2’S,4’S)-lysergic acid 2,4-dimethylazetidide (LSZ). Drug Test Anal 9:38–50
Brandt SD, Kavanagh PV, Westphal F, Elliott SP, Wallach J, Stratford A, Nichols DE, Halberstadth AL (2017) Return of the lysergamides. Part III: analytical characterization of N6-ethyl-6-norlysergic acid diethylamide (ETH-LAD) and 1-propionyl ETH-LAD (1P-ETH-LAD). Drug Test Anal 9:1641–1649
Brandt SD, Kavanagh PV, Westphal F, Stratford A, Odland AU, Klein AK, Dowling G, Dempster NM, Wallach J, Passie T, Halberstadt AL (2020) Return of the lysergamides. Part VI: Analytical and behavioural characterization of 1-cyclopropanoyl-d-lysergic acid diethylamide (1CP-LSD). Drug Test Anal 12:812–826
Brandt SD, Kavanagh PV, Westphal F, Stratford A, Elliott SP, Dowling G, Wallach J, Halberstadt AL (2019) Return of the lysergamides. Part V: analytical and behavioural characterization of 1-butanoyl-d-lysergic acid diethylamide (1B-LSD). Drug Test Anal 11:1122–1133
Tanaka R, Kawamura M, Hakamatsuka T, Kikura-Hanajiri R (2020) Identification and analysis of LSD derivatives in illegal products as paper sheet. Yakugaku Zasshi (in Japanese) 140:739–750
Tanaka R, Kawamura M, Hakamatsuka T, Kikura-Hanajiri R (2020) Identification of LSD derivatives, 1cP-LSD, MIPLA and 1B-LSD in illegal products as paper sheet. Yakugaku Zasshi (in Japanese) 140:1405–1413
Halberstadt AL, Chatha M, Klein AK, McCorvy JD, Meyer MR, Wagmann L, Stratford A, Brandt SD (2020) Pharmacological and biotransformation studies of 1-acyl-substituted derivatives of d-lysergic acid diethylamide (LSD). Neuropharmacology 172:107856
Brandt SD, Kavanagh PV, Westphal F, Pulver B, Morton K, Stratford A, Dowling G, Halberstadth AL (2022) Return of the lysergamides. Part VII: analytical and behavioural characterization of 1-valeroyl-D-lysergic acid diethylamide(1V-LSD). Drug Test Anal 14:733–740
Salamone SJ, Li Z, McNally AJ, Vitone S, Wu RS (1997) Epimerization studies of LSD using 1H nuclear magnetic resonance (NMR) spectroscopy. J Anal Toxicol 21:492–497
Li Z, McNally AJ, Wang H, Salamone SJ (1998) Stability study of LSD under various storage conditions. J Anal Toxicol 22:520–525
Brandt SD, Kavanagh PV, Westphal F, Pulver B, Schwelm HM, Whitelock K, Stratford A, Auwärter V, Halberstadth AL (2022) Analytical profile, in vitro metabolism and behavioral properties of the lysergamide 1P-AL-LAD. Drug Test Anal 14:1503–1518
Nichols DE, Frescas S, Marona-Lewicka D, Kurrasch-Orbaugh DM (2002) Lysergamides of isomeric 2,4-dimethylazetidines map the binding orientation of the diethylamide moiety in the potent hallucinogenic agent N, N-diethyllysergamide (LSD). J Med Chem 45:4344–4349
Acknowledgements
A portion of this work was supported by a Grant-in-Aid for Scientific Research from the Ministry of Health, Welfare, and Labor of Japan.
Funding
The work of Rie Tanaka was supported by the Ministry of Health, Labour and Welfare, under Grant 19KC1002 and 22KC1004, and the work of Ruri Kikura-Hanajiri was supported by the Ministry of Health, Labour and Welfare, under Grant 21KC1002,
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Tanaka, R., Kawamura, M., Mizutani, S. et al. Identification of LSD analogs, 1cP-AL-LAD, 1cP-MIPLA, 1V-LSD and LSZ in sheet products. Forensic Toxicol 41, 294–303 (2023). https://doi.org/10.1007/s11419-023-00661-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11419-023-00661-1