Abstract
The purpose of the study is to investigate the practical aspects of environmental pollution near motorways by dust particles formed during repair works and to identify specific ways to improve the overall environmental situation near highways and reduce the level of pollution during road maintenance. The leading approach is a systematic analysis of the problems of environmental pollution by dust emissions in general. The study results reflect the entire volume of research efforts made to determine the optimal composition of the concrete mixture for road repairs, which allows reducing the emission of dust particles into the surrounding roadside environment and improves the environmental situation on the roadside.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Data availability
The data that support the findings of this study are available on request from the corresponding author.
Change history
27 February 2024
This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1007/s11356-024-32648-9
References
Al-Majidi MH, Lampropoulos AP, Cundy AB, Tsioulou OT, Al-Rakabi S (2018) A novel corrosion resistant repair technique for existing reinforced concrete (RC) elements using polyvinyl alcohol fibre reinforced geopolymer concrete (PVAFRGC). Construct Build Mater 164(3):603–619. https://doi.org/10.1016/j.conbuildmat.2017.12.213
Amato F (2018) Non-exhaust emissions. Academic Press, London, p 342
Bencardino F, Condello A (2016) Innovative solution to retrofit RC members: inhibiting-repairing-strengthening (IRS). Construct Build Mater 117(8):171–181. https://doi.org/10.1016/j.conbuildmat.2016.05.053
D’Agosto M (2019) Transportation, energy use and environmental impacts. Elsevier, Oxford, p 308. https://doi.org/10.1016/C2016-0-04814-3
Denisova ES, Didenko DR (2014) Environmental analysis of a road repair enterprise. Dynam Sys Mech Mach 4:211–214
Donev R (2019) DNA repair. Academic Press, London, p 383
Kala R (2016) On-road intelligent vehicles. Butterworth-Heinemann, Oxford, p 536
Lan K, Ou L, Park S, Kelley SS, English BC, Yu TE, Larson J, Yao Y (2021) Techno-economic analysis of decentralized preprocessing systems for fast pyrolysis biorefineries with blended feedstocks in the southeastern United States. Renew Sustain Energy Rev 143:110881. https://doi.org/10.1016/j.rser.2021.110881
Lutkovska S (2020) Methodical approaches to evaluation of the processes of modernization of the environmental sustainable system. Sci Horiz 87(2):111–118. https://doi.org/10.33249/2663-2144-2020-87-02-111-118
Mawulé Dassekpo JB, Feng W, Li Y, Miao L, Dong Z, Ye J (2021) Synthesis and characterization of alkali-activated loess and its application as protective coating. Construct Build Mater 282:122631. https://doi.org/10.1016/j.conbuildmat.2021.122631
Obminski A (2020) Asbestos in building and its destruction. Construct Build Mater 249:118685. https://doi.org/10.1016/j.conbuildmat.2020.118685
Orcesi AD, Feraille A, Chataigner S (2019) Fatigue strengthening of steel structures using high modulus CFRP plates: development of a life-cycle analysis approach. Construct Build Mater 227:116628. https://doi.org/10.1016/j.conbuildmat.2019.08.009
Radkevich MV (2013) Revealing the significance of some factors affecting air pollution by the automobile and road complex. Trans Probl 32:106–110
Shevchenko I, Golub G, Skydan O, Tsyvenkova N, Marus O (2022) Energy and ecological prerequisites for the choice of technologies for processing organic llivestock waste. Sci Horiz 25(10):87–98. https://doi.org/10.48077/scihor.25(10).2022.87-98
Sukhija M, Saboo N (2021) A comprehensive review of warm mix asphalt mixtures-laboratory to field. Construct Build Mater 274:121781. https://doi.org/10.1016/j.conbuildmat.2020.121781
Tang N, Yang KK, Alrefai Y, Dai JG, Wu LM, Wang Q (2020) Reduce VOCs and PM emissions of warm-mix asphalt using geopolymer additives. Construct Build Mater 244:118338. https://doi.org/10.1016/j.conbuildmat.2020.118338
Venkatram A, Schulte N (2018) Urban transportation and air pollution. Elsevier, Oxford, p 188
Wang F, Xie T, Lei S, Ou J, Li W, Xue M, Huang D (2020) Preparation and properties of foundry dust/Portland cement-based composites and superhydrophobic coatings. Construct Build Mater 246:118466. https://doi.org/10.1016/j.conbuildmat.2020.118466
Wang F, Liu H, Ou J, Li W (2021) Fast fabrication of superhydrophobic surfaces on hardened cement paste using sodium laurate aqueous solution. Construct Build Mater 278:122385. https://doi.org/10.1016/j.conbuildmat.2021.122385
Zamanabadi SN, Zareei SA, Shoaei P, Ameri F (2019) Ambient-cured alkali-activated slag paste incorporating micro-silica as repair material: effects of alkali activator solution on physical and mechanical properties. Construct Build Mat 229:116911. https://doi.org/10.1016/j.conbuildmat.2019.116911
Zhang Y, Mohsen JP (2018) A project-based sustainability rating tool for pavement maintenance. Engineering 4(2):200–208. https://doi.org/10.1016/j.eng.2018.03.001
Zhao Z, Guan X, Xiao F, Xie Z, Xia P, Zhou Q (2020) Applications of asphalt concrete overlay on Portland cement concrete pavement. Construct Build Mater 264:120045. https://doi.org/10.1016/j.conbuildmat.2020.120045
Acknowledgements
The authors gratefully acknowledge the financial support from the Science and Technology Department of Ningxia, the Scientific Research Fund of North Minzu University (No. 2020KYQD40), and China Scholarship Council under Grant (No. 202008100027, No. 202108100024).
Funding
This research project was supported by funding from the Science and Technology Department of Ningxia, the Scientific Research Fund of North Minzu University (No. 2020KYQD40), and China Scholarship Council (No. 202008100027, No. 202108100024).
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection, and analysis were performed by Andrii Bieliatynskyi, Yulin He, and Valerii Pershakov. The first draft of the manuscript was written by Oleksandra Akmaldinova and Kateryna Krayushkina. All authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethical approval
Not applicable
Consent to participate
Not applicable
Consent for publication
Not applicable
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article has been retracted. Please see the retraction notice for more detail: https://doi.org/10.1007/s11356-024-32648-9
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Bieliatynskyi, A., He, Y., Pershakov, V. et al. RETRACTED ARTICLE: Pollution of the roadside environment by dust particles from road surface repairs. Environ Sci Pollut Res 30, 35663–35669 (2023). https://doi.org/10.1007/s11356-022-24828-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-24828-2