Abstract
Mining and extraction of stones and minerals play a significant role in many countries economic growth in the world. The production of dolomite minerals in various industries in India and other countries produces vast amounts of waste in different fractions. Disposal of these types of industrial wastes in an immense quantity causes environmental pollution. The performance of dolomite mining residues on concrete properties as a fine aggregate substitute was examined. The microstructural analysis was conducted on the concrete samples to find the effect of dolomite mining residues in concrete. The stress–strain behaviour of the dolomite mining residues concrete was studied. The effect of exposure to elevated temperature and freeze–thaw on concrete properties containing dolomite mining residues was found up to 100% at 10% incremental order. The thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) tests were conducted on the dolomite mining residues and concrete samples. As a test result, concrete properties influence with the incorporation of the dolomite mining residues as a substitution of river sand, but no significant effect is observed in the concrete properties containing 10% dolomite mining residues. Up to 10% of dolomite production waste can be used as a sand substitute in concrete and other applications for sustainable development.
Similar content being viewed by others
Data availability
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
References
Abed M, de Brito J (2020) Evaluation of high-performance self-compacting concrete using alternative materials and exposed to elevated temperatures by non-destructive testing. J Build Eng 32:101720. https://doi.org/10.1016/j.jobe.2020.101720
Agrawal Y, Gupta T, Siddique S et al (2021a) Potential of dolomite industrial waste as construction material: a review. Innov Infrastruct Solut 6:205. https://doi.org/10.1007/s41062-021-00570-5
Agrawal Y, Siddique S, Sharma RK, Gupta T (2021b) Valorization of granite production dust in development of rich and lean cement mortar. J Mater Cycles Waste Manag 23(2):686–698. https://doi.org/10.1007/s10163-020-01158-4
Agrawal Y, Gupta T, Sharma RK (2022b) Strength and durability assessment of concrete containing dolomite quarry waste as fine aggregate. J Mater Cycles Waste Manag 24:268–286. https://doi.org/10.1007/s10163-021-01318-0
Agrawal Y, Gupta T, Chaudhary S (2022a) Effect of mechanically treated and untreated zinc tailing waste as cement substitute in concrete production: an experimental and statistical analysis. Environ Sci Pollut Res 1–26. https://doi.org/10.1007/s11356-021-17845-0
Aliabdo AA, Abd Elmoaty AEM, Auda EM (2014) Re-use of waste marble dust in the production of cement and concrete. Constr Build Mater 50:28–41. https://doi.org/10.1016/j.conbuildmat.2013.09.005
ASTM C469 (2014) Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM Int West Conshohocken, PA
ASTM C666/C666M (2003) Standard test method for resistance of concrete to rapid freezing and thawing. ASTM Int West Conshohocken, PA
Bekem Kara İ (2021) Effects of cooling regimes on limestone rock and concrete with limestone aggregates at elevated temperatures. Int J Rock Mech Min Sci 138:104618. https://doi.org/10.1016/j.ijrmms.2021.104618
Bheel N, Mahro SK, Adesina A (2021) Influence of coconut shell ash on workability, mechanical properties, and embodied carbon of concrete. Environ Sci Pollut Res 28(5):5682–5692. https://doi.org/10.1007/s11356-020-10882-1
BIS:10262 (2009) Indian standard guidelines for concrete mix design proportioning. Bur. Indian Stand. New Delhi, India.
BIS:13311(1992) Method of Non-destructive testing of concrete, Part 1: Ultrasonic pulse velocity. Bur Indian Stand. New Delhi, India
BIS:2386 (2002) Method of Test for aggregate for concrete. Part III- Specific gravity, density, voids, absorption and bulking. Bur Indian Stand. New Delhi, India
BIS:383 (2016) Coarse and fine aggregate for concrete - Specification. Bur Indian Stand. New Delhi, India
BIS:456 (2006) Plain and reinforced concrete. Bur Indian Stand. New Delhi, India
BIS:516 (2004) Indian standard methods of tests for strength of concrete. Bur Indian Stand. New Delhi, India
BIS:8112 (2013) Specification for 43 grade Ordinary Portland Cement. Bur Indian Stand. New Delhi, India
Bisht K, Ramana PV (2018) Sustainable production of concrete containing discarded beverage glass as fine aggregate. Constr Build Mater 177:116–124. https://doi.org/10.1016/j.conbuildmat.2018.05.119
Bogas JA, De Brito J, Ramos D (2016) Freeze-thaw resistance of concrete produced with fine recycled concrete aggregates. J Clean Prod 115:294–306. https://doi.org/10.1016/j.jclepro.2015.12.065
Chen JJ, Li BH, Ng PL, Kwan AKH (2020) Adding granite polishing waste as sand replacement to improve packing density, rheology, strength and impermeability of mortar. Powder Technol 364:404–415. https://doi.org/10.1016/j.powtec.2020.02.012
Choudhary R, Gupta R, Nagar R (2020) Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume. Constr Build Mater 239:117888. https://doi.org/10.1016/j.conbuildmat.2019.117888
Chouhan DS, Agrawal Y, Gupta T, Sharma RK (2017) Utilization of granite slurry waste in concrete: a review. Indian J Sci Technol 10(6):1–9. https://doi.org/10.17485/ijst/2017/v10i6/88279
Collins MP, Mitchell D, MacGregor JG (1993) Structural design considerations for high-strength concrete. Concr Int
Dan Gavriletea M (2017) Environmental impacts of sand exploitation. Analysis of Sand Market Sustain 9(7):1118
El-Didamony H, Amer AA, El-Hoseny S (2016) Recycling of low-grade aluminosilicate refractory brick waste product in blended cement. J Therm Anal Calorim 125(1):23–33. https://doi.org/10.1007/s10973-016-5431-9
Fu Q, Wu Y, Zhang N et al (2020) Durability and mechanism of high-salt resistance concrete exposed to sewage-contaminated seawater. Constr Build Mater 257:119534. https://doi.org/10.1016/j.conbuildmat.2020.119534
Gencel O, Ozel C, Koksal F et al (2012) Properties of concrete paving blocks made with waste marble. J Clean Prod 21(1):62–70. https://doi.org/10.1016/j.jclepro.2011.08.023
Gu K, Jin F, Al-Tabbaa A, Shi B (2014) Activation of ground granulated blast furnace slag by using calcined dolomite. Constr Build Mater 68:252–258. https://doi.org/10.1016/j.conbuildmat.2014.06.044
Gupta T, Chaudhary S, Sharma RK (2014) Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate. Constr Build Mater 73:562–574. https://doi.org/10.1016/j.conbuildmat.2014.09.102
Gupta T, Kothari S, Siddique S et al (2019) Influence of stone processing dust on mechanical, durability and sustainability of concrete. Constr Build Mater 223:918–927. https://doi.org/10.1016/j.conbuildmat.2019.07.188
Ince C, Hamza A, Derogar S, Ball RJ (2020) Utilisation of waste marble dust for improved durability and cost efficiency of pozzolanic concrete. J Clean Prod 270:122213. https://doi.org/10.1016/j.jclepro.2020.122213
Kabeer KISA, Vyas AK (2018) Utilization of marble powder as fine aggregate in mortar mixes. Constr Build Mater 165:321–332. https://doi.org/10.1016/j.conbuildmat.2018.01.061
Kankam CK, Meisuh BK, Sossou G, Buabin TK (2017) Stress-strain characteristics of concrete containing quarry rock dust as partial replacement of sand. Case Stud Constr Mater 7:66–72. https://doi.org/10.1016/j.cscm.2017.06.004
Khaliq W, Taimur, (2018) Mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures. Fire Saf J 96:203–214. https://doi.org/10.1016/j.firesaf.2018.01.009
Koehnken L, Rintoul MS, Goichot M et al (2020) Impacts of riverine sand mining on freshwater ecosystems: a review of the scientific evidence and guidance for future research. River Res Appl 36(3):362–370. https://doi.org/10.1002/rra.3586
Kore SD, Vyas AK (2016) Durability of concrete using marble mining waste. J Build Mater Struct 3(2):55–67
Kore SD, Vyas AK (2019) Impact of fire on mechanical properties of concrete containing marble waste. J King Saud Univ - Eng Sci 31(1):42–51. https://doi.org/10.1016/j.jksues.2017.03.007
Ma Q, Guo R, Zhao Z et al (2015) Mechanical properties of concrete at high temperature-a review. Constr Build Mater 93:371–383
Mosaferi M, Dianat I, Khatibi MS et al (2014) Review of environmental aspects and waste management of stone cutting and fabrication industries. J Mater Cycles Waste Manag 16(4):721–730. https://doi.org/10.1007/s10163-013-0193-y
Mundra S, Sindhi PR, Chandwani V et al (2016) Crushed rock sand – an economical and ecological alternative to natural sand to optimize concrete mix. Perspect Sci 8:345–347. https://doi.org/10.1016/j.pisc.2016.04.070
Pathak N, Siddique R (2012a) Effects of elevated temperatures on properties of self-compacting-concrete containing fly ash and spent foundry sand. Constr Build Mater 34:512–521. https://doi.org/10.1016/j.conbuildmat.2012.02.026
Pathak N, Siddique R (2012b) Properties of self-compacting-concrete containing fly ash subjected to elevated temperatures. Constr Build Mater 30:274–280. https://doi.org/10.1016/j.conbuildmat.2011.11.010
Phan LT, Carino NJ (2004) Fire performance of high strength concrete: Research needs. In: Structures Congress 2000: Advanced Technology in Structural Engineering 1–8
Phan LT, Phan LT (1996) Fire performance of high-strength concrete: A report of the state-of-the art. Gaithersburg, MD, USA: US Department of Commerce, Technology Administration, National Institute of Standards and Technology, Office of Applied Economics, Building and Fire Research Laboratory
Rashad AM, Sadek DM, Hassan HA (2016) An investigation on blast-furnace stag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures. J Clean Prod 112:1086–1096. https://doi.org/10.1016/j.jclepro.2015.07.127
Rukavina MJ, Bjegovic D, Gabrijel I (2015) Mechanical properties of self-compacting concrete with different mineral aditives after high temperature exposure. J Struct Fire Eng.https://doi.org/10.1260/2040-2317.6.3.177
Sahmenko G, Korjakins A, Bajare D (2020) High-performance concrete using dolomite by-products. RILEM Bookseries 26:99–103. https://doi.org/10.1007/978-3-030-43332-1_20
Siddique S, Shrivastava S, Chaudhary S, Gupta T (2018) Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate. Constr Build Mater 169:289–298. https://doi.org/10.1016/j.conbuildmat.2018.02.213
Siddique S, Chaudhary S, Shrivastava S, Gupta T (2019) Sustainable utilisation of ceramic waste in concrete: exposure to adverse conditions. J Clean Prod 210:246–255. https://doi.org/10.1016/j.jclepro.2018.10.231
Siddique S, Naqi A, Jang JG (2020) Influence of water to cement ratio on CO2 uptake capacity of belite-rich cement upon exposure to carbonation curing. Cem Concr Compos 111:103616. https://doi.org/10.1016/j.cemconcomp.2020.103616
Stoyanov V, Kostova B, Petkova V, Pelovski Y (2012) Structure of white cement mortars with high content of marble powder. J Therm Anal Calorim 110(1):405–412
Uygunoğlu T, Topçu IB, Çelik AG (2014) Use of waste marble and recycled aggregates in self-compacting concrete for environmental sustainability. J Clean Prod 84:691–700. https://doi.org/10.1016/j.jclepro.2014.06.019
Wang ZR, Li B, Liu HB et al (2020) Degradation characteristics of graphite tailings cement mortar subjected to freeze-thaw cycles. Constr Build Mater 234:117422. https://doi.org/10.1016/j.conbuildmat.2019.117422
Yeo JS, Koting S, Onn CC, Mo KH (2021) An overview on the properties of eco-friendly concrete paving blocks incorporating selected waste materials as aggregate. Environ Sci Pollut Res 28:29009–29036. https://doi.org/10.1007/s11356-021-13836-3
Author information
Authors and Affiliations
Contributions
Conceptualization: YA and TG; methodology: YA and TG; formal analysis and investigation: YA; writing — original draft preparation: YA; writing — review and editing: YA, TG, SS, and RKS; supervision: TG, SS, RKS, and NLP.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Agrawal, Y., Gupta, T., Siddique, S. et al. Environmental assessment, microstructural behaviour, stress–strain characteristics, and effect of exposure to extreme temperature on sustainable concrete made with dolomite mining residues. Environ Sci Pollut Res 29, 44067–44090 (2022). https://doi.org/10.1007/s11356-022-18730-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-18730-0