Abstract
Among the different kinds of renewable energy sources, solar energy plays a major role because it is safe and inexpensive at all times. Several techniques are developed for steam and electricity generation by solar energy, in which the parabolic trough collector is an advantageous method for generating steam and electricity. Different types of collectors for various temperatures, in which PTCs are used to produce medium temperature ranges using the readily available solar energy, were developed, produced, and tests. Many theoretical and experimental studies have been carried out to improvise parabolic trough collectors’ optical and thermal characteristics. The modifications are reviewed in this paper to enhance the design modification, optical and thermal properties utilized in the collector. This analysis paper also elucidates the use of PTC desalination, various integrated parabolic trough collector methods for power generation, and the economic aspects of parabolic trough collector.
Similar content being viewed by others
Data availability
Not applicable
References
Abdulhamed AJ, Adam NM, Ab-Kadir MZA, Hairuddin AA (2018) Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications. Renew Sust Energ Rev 91(March):822–831. https://doi.org/10.1016/j.rser.2018.04.085
Akbarzadeh S, Valipour MS (2018) Heat transfer enhancement in parabolic trough collectors: A comprehensive review. Renew Sust Energ Rev 92(May):198–218. https://doi.org/10.1016/j.rser.2018.04.093
Al-Ansary H, Zeitoun O (2011) Numerical study of conduction and convection heat losses from a half-insulated air-filled annulus of the receiver of a parabolic trough collector. Sol Energy 85(11):3036–3045. https://doi.org/10.1016/j.solener.2011.09.002
Almanza R, Lentz A (1998) Electricity production at low powers by direct steam generation with parabolic troughs. Sol Energy 64(1–3):115–120. https://doi.org/10.1016/S0038-092X(98)00046-2
Almasabi A, Alobaidli A, Zhang TJ (2015) Transient Characterization of Multiple Parabolic Trough Collector Loops in a 100 MW CSP Plant for Solar Energy Harvesting. Energy Procedia 69:24–33. https://doi.org/10.1016/j.egypro.2015.03.004
Al-Sulaiman FA, Hamdullahpur F, Dincer I (2012) Performance assessment of a novel system using parabolic trough solar collectors for combined cooling, heating, and power production. Renew Energy 48:161–172. https://doi.org/10.1016/j.renene.2012.04.034
Al-Sulaiman FA, Zubair MI, Atif M, Gandhidasan P, Al-Dini SA, Antar MA (2015) Humidification dehumidification desalination system using parabolic trough solar air collector. Appl Therm Eng 75:809–816. https://doi.org/10.1016/j.applthermaleng.2014.10.072
Arun CA, Sreekumar PC (2018) Modeling and performance evaluation of parabolic trough solar collector desalination system. Mater Today: Proceedings 5(1):780–788. https://doi.org/10.1016/j.matpr.2017.11.147
Attia MEH, Driss Z, Kabeel AE, Afzal A, Manokar AM, Sathyamurthy R (2021) Phosphate bed as energy storage materials for augmentation of conventional solar still productivity. Environ Prog Sustain Energy. https://doi.org/10.1002/ep.13581
Azadi P (2012) An integrated approach for the production of hydrogen and methane by catalytic hydrothermal glycerol reforming coupled with parabolic trough solar thermal collectors. Int J Hydrog Energy 37(23):17691–17700. https://doi.org/10.1016/j.ijhydene.2012.08.045
Bakos GC, Tsagas NF (2002) Technical feasibility and economic viability of a small-scale grid connected solar thermal installation for electrical-energy saving. Appl Energy 72(3–4):621–630. https://doi.org/10.1016/S0306-2619(02)00044-2
Barriga J, Ruiz-De-Gopegui U, Goikoetxea J, Coto B, Cachafeiro H (2014) Selective coatings for new concepts of parabolic trough collectors. Energy Procedia 49:30–39. https://doi.org/10.1016/j.egypro.2014.03.004
Bellos E, Tzivanidis C (2018) Thermal analysis of parabolic trough collector operating with mono and hybrid nanofluids. Sustain Energy Technol Assessments 26(August 2017):105–115. https://doi.org/10.1016/j.seta.2017.10.005
Bellos E, Tzivanidis C, Tsimpoukis D (2018) Optimum number of internal fins in parabolic trough collectors. Appl Therm Eng 137(April):669–677. https://doi.org/10.1016/j.applthermaleng.2018.04.037
Bellos E, Tzivanidis C, Said Z (2020) A systematic parametric thermal analysis of nanofluid-based parabolic trough solar collectors. Sustain Energy Technol Assessments 39(March):100714. https://doi.org/10.1016/j.seta.2020.100714
Chauhan VK, Shukla SK, Tirkey JV, Singh Rathore PK (2021) A comprehensive review of direct solar desalination techniques and its advancements. J Clean Prod 284:124719. https://doi.org/10.1016/j.jclepro.2020.124719
Cheng ZD, He YL, Xiao J, Tao YB, Xu RJ (2010) Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector. Intl Commun Heat Mass Transfer 37(7):782–787. https://doi.org/10.1016/j.icheatmasstransfer.2010.05.002
Coventry JS (2005) Performance of a concentrating photovoltaic/thermal solar collector. Sol Energy 78(2):211–222. https://doi.org/10.1016/j.solener.2004.03.014
Daniel P, Joshi Y, Das AK (2011) Numerical investigation of parabolic trough receiver performance with outer vacuum shell. Solar Energy 85(9):1910–1914
de Risi A, Milanese M, Laforgia D (2013) Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids. Renew Energy 58:134–139. https://doi.org/10.1016/j.renene.2013.03.014
Demagh Y, Bordja I, Kabar Y, Benmoussa H (2015) A design method of an S-curved parabolic trough collector absorber with a three-dimensional heat flux density distribution. Sol Energy 122:873–884. https://doi.org/10.1016/j.solener.2015.10.002
Devanarayanan K, Kalidasa Murugavel K (2014) Integrated collector storage solar water heater with compound parabolic concentrator - Development and progress. Renew Sust Energ Rev 39:51–64. https://doi.org/10.1016/j.rser.2014.07.076
Dhanalakshmi CS, Madhu P, Karthick A, Mathew M, Vignesh Kumar R (2020) A comprehensive MCDM-based approach using TOPSIS and EDAS as an auxiliary tool for pyrolysis material selection and its application. Biomass Conv Biorefinery. https://doi.org/10.1007/s13399-020-01009-0
Dhanalakshmi CS, Madhu P, Karthick A, Kumar RV (2021) Combination of Woody and Grass type Biomass : Waste Management , Influence of Process Parameters, Yield of Bio-oil by Pyrolysis and its Chromatographic Characterization. J Sci Ind Res 80(February):172–180
Ebrahim Ghasemi S, Akbar Ranjbar A (2017) Numerical thermal study on effect of porous rings on performance of solar parabolic trough collector. Appl Therm Eng 118:807–816. https://doi.org/10.1016/j.applthermaleng.2017.03.021
Ebrazeh S, Sheikholeslami M (2020) Applications of nanomaterial for parabolic trough collector. Powder Technol 375:472–492. https://doi.org/10.1016/j.powtec.2020.08.005
El Gharbi N, Derbal H, Bouaichaoui S, Said N (2011) A comparative study between parabolic trough collector and linear Fresnel reflector technologies. Energy Procedia 6:565–572. https://doi.org/10.1016/j.egypro.2011.05.065
ElHelw M, El-Maghlany WM, El-Ashmawy WM (2020) Novel sea water desalination unit utilizing solar energy heating system. Alexandria Eng J 59(2):915–924. https://doi.org/10.1016/j.aej.2020.03.019
Fu W, Yang MC, Zhu YZ, Yang L (2015) The Wind-structure Interaction Analysis and Optimization of Parabolic Trough Collector. Energy Procedia 69:77–83. https://doi.org/10.1016/j.egypro.2015.03.010
Fuqiang W, Zhexiang T, Xiangtao G, Jianyu T, Huaizhi H, Bingxi L (2016) Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube. Energy 114:275–292. https://doi.org/10.1016/j.energy.2016.08.013
García-Rodríguez L, Gómez-Camacho C (1999) Design parameter selection for a distillation system coupled to a solar parabolic trough collector. Desalination 122(2–3):195–204. https://doi.org/10.1016/S0011-9164(99)00041-7
García-Rodríguez L, Palmero-Marrero AI, Gómez-Camacho C (1999) Application of direct steam generation into a solar parabolic trough collector to multieffect distillation. Desalination 125(1–3):139–145. https://doi.org/10.1016/S0011-9164(99)00132-0
García-Rodríguez L, Palmero-Marrero AI, Gómez-Camacho C (2001) Thermoeconomic optimizing of the SOL-14 plant (Plataforma Solar de Almería, Spain). Desalination 136(1–3):219–223. https://doi.org/10.1016/S0011-9164(01)00184-9
García-Rodríguez L, Palmero-Marrero AI, Gómez-Camacho C (2002) Comparison of solar thermal technologies for applications in seawater desalination. Desalination 142(2):135–142. https://doi.org/10.1016/S0011-9164(01)00432-5
Ghasemi SE, Ranjbar AA (2017) Effect of using nanofluids on efficiency of parabolic trough collectors in solar thermal electric power plants. Int J Hydrog Energy 42(34):21626–21634. https://doi.org/10.1016/j.ijhydene.2017.07.087
Ghosh A (2020) Potential of building integrated and attached/applied photovoltaic (BIPV/BAPV) for adaptive less energy-hungry building’s skin: A comprehensive Review. Journal of Cleaner Production, 123343. https://doi.org/10.1016/j.jclepro.2020.123343
Gong B, Wang Z, Li Z, Zhang J, Fu X (2012) Field measurements of boundary layer wind characteristics and wind loads of a parabolic trough solar collector. Sol Energy 86(6):1880–1898. https://doi.org/10.1016/j.solener.2012.02.036
Gowda A, Dassappa S, Hanumanthrappa R, Kempanna S (2020) Effect of reduced graphene oxide as nanofluid on solar parabolic trough collector receiver model. Materials Today: Proceedings, 27, 396–401. https://doi.org/10.1016/j.matpr.2019.11.234
Hachicha AA, Rodríguez I, Lehmkuhl O, Oliva A (2014a) On the CFDHT of the flow around a parabolic trough solar collector under real working conditions. Energy Procedia 49:1379–1390. https://doi.org/10.1016/j.egypro.2014.03.147
Hachicha AA, Rodríguez I, Oliva A (2014b) Wind speed effect on the flow field and heat transfer around a parabolic trough solar collector. Appl Energy 130:200–211. https://doi.org/10.1016/j.apenergy.2014.05.037
Halimi M, Outana I, Diouri J, El Amrani A, Messaoudi C (2018) Experimental investigation of absorbed flux circumferential distribution of an absorber with U-pipe tube exchanger for Parabolic Trough Collectors. Appl Therm Eng 129:1230–1239. https://doi.org/10.1016/j.applthermaleng.2017.10.075
Herrmann U, Kelly B, Price H (2004) Two-tank molten salt storage for parabolic trough solar power plants. Energy 29(5–6):883–893. https://doi.org/10.1016/S0360-5442(03)00193-2
Horn M, Führing H, Rheinländer J (2004) Economic analysis of integrated solar combined cycle power plants A sample case: The economic feasibility of an ISCCS power plant in Egypt. Energy 29(5–6):935–945. https://doi.org/10.1016/S0360-5442(03)00198-1
Hoseinzadeh H, Kasaeian A, Behshad Shafii M (2018) Geometric optimization of parabolic trough solar collector based on the local concentration ratio using the Monte Carlo method. Energy Convers Manag 175(August):278–287. https://doi.org/10.1016/j.enconman.2018.09.001
Hoste G, Schuknecht N (2015) Thermal Efficiency Analysis of SkyFuel’s Advanced, Large-aperture, Parabolic Trough Collector. Energy Procedia 69:96–105. https://doi.org/10.1016/j.egypro.2015.03.012
Ibrahim O, Fardoun F, Louahlia-gualous H (2014) Review of water-heating systems : General selection approach based on energy and environmental aspects. Build Environ 72:259–286
Jafari Mosleh H, Mamouri SJ, Shafii MB, Hakim Sima A (2015) A new desalination system using a combination of heat pipe, evacuated tube and parabolic through collector. Energy Convers Manag 99:141–150. https://doi.org/10.1016/j.enconman.2015.04.028
Jamal-Abad MT, Saedodin S, Aminy M (2017) Experimental investigation on a solar parabolic trough collector for absorber tube filled with porous media. Renew Energy 107:156–163. https://doi.org/10.1016/j.renene.2017.02.004
Jamali H (2019) Investigation and review of mirrors reflectance in parabolic trough solar collectors (PTSCs). Energy Rep 5:145–158. https://doi.org/10.1016/j.egyr.2019.01.006
Jaramillo OA, Borunda M, Velazquez-Lucho KM, Robles M (2016) Parabolic trough solar collector for low enthalpy processes: An analysis of the efficiency enhancement by using twisted tape inserts. Renew Energy 93:125–141. https://doi.org/10.1016/j.renene.2016.02.046
Jebasingh VK, Herbert GMJ (2016) A review of solar parabolic trough collector. Renew Sust Energ Rev 54:1085–1091. https://doi.org/10.1016/j.rser.2015.10.043
Kalogirou S (1998) Use of parabolic trough solar energy collectors. Appl Energy 60(60):65–88
Karthick A, Murugavel KK, Ramanan P (2018) Performance enhancement of a building-integrated photovoltaic module using phase change material. Energy 142:803–812. https://doi.org/10.1016/j.energy.2017.10.090
Karthick A, Kalidasa Murugavel K, Ghosh A, Sudhakar K, Ramanan P (2020a) Investigation of a binary eutectic mixture of phase change material for building integrated photovoltaic (BIPV) system. Sol Energy Mater Sol Cells 207:110360. https://doi.org/10.1016/j.solmat.2019.110360
Karthick A, Kalidasa Murugavel K, Sudalaiyandi K, Muthu Manokar A (2020b) Building integrated photovoltaic modules and the integration of phase change materials for equatorial applications. Build Serv Eng Res Technol 41(5):634–652. https://doi.org/10.1177/0143624419883363
Karthick A, Manokar Athikesavan M, Pasupathi MK, Manoj Kumar N, Chopra SS, Ghosh A (2020c) Investigation of Inorganic Phase Change Material for a Semi-Transparent Photovoltaic (STPV) Module. Energies 13(14):3582. https://doi.org/10.3390/en13143582
Karthick A, Ramanan P, Ghosh A, Stalin B, Vignesh Kumar R, Baranilingesan I (2020d) Performance enhancement of copper indium diselenide photovoltaic module using inorganic phase change material. Asia Pac J Chem Eng 15(5). https://doi.org/10.1002/apj.2480
Khanna S, Singh S, Kedare SB (2014) Effect of angle of incidence of sun rays on the bending of absorber tube of solar parabolic trough concentrator. Energy Procedia 48:123–129. https://doi.org/10.1016/j.egypro.2014.02.015
Krishna Y, Faizal M, Saidur R, Ng KC, Aslfattahi N (2020) State-of-the-art heat transfer fluids for parabolic trough collector. Int J Heat Mass Transf 152:119541. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119541
Krishnavel V, Karthick A, Murugavel KK (2014) Experimental analysis of concrete absorber solar water heating systems. Energy Build 84:501–505. https://doi.org/10.1016/j.enbuild.2014.08.025
Kumaresan G, Sudhakar P, Santosh R, Velraj R (2017) Experimental and numerical studies of thermal performance enhancement in the receiver part of solar parabolic trough collectors. Renew Sust Energ Rev 77(March):1363–1374. https://doi.org/10.1016/j.rser.2017.01.171
Liang H, Fan M, You S, Zhang H, Zheng W (2018) Model development and performance analysis of the nanofluid-based direct absorption parabolic trough collectors. J Clean Prod 202:299–310. https://doi.org/10.1016/j.jclepro.2018.08.119
Liu Q, Yang M, Lei J, Jin H, Gao Z, Wang Y (2012) Modeling and optimizing parabolic trough solar collector systems using the least squares support vector machine method. Sol Energy 86(7):1973–1980. https://doi.org/10.1016/j.solener.2012.01.026
Loni R, Ghobadian B, Kasaeian AB, Akhlaghi MM, Bellos E, Najafi G (2020) Sensitivity analysis of parabolic trough concentrator using rectangular cavity receiver. Appl Therm Eng 169(January):114948. https://doi.org/10.1016/j.applthermaleng.2020.114948
Malekan M, Khosravi A, Syri S (2019) Heat transfer modeling of a parabolic trough solar collector with working fluid of Fe3O4 and CuO/Therminol 66 nanofluids under magnetic field. Appl Therm Eng 163(August):114435. https://doi.org/10.1016/j.applthermaleng.2019.114435
Manoj Kumar P, Mylsamy K, Alagar K, Sudhakar K (2020) Investigations on an evacuated tube solar water heater using hybrid-nano based organic phase change material. Int J Green Energy 17(13):872–883. https://doi.org/10.1080/15435075.2020.1809426
Manoram RB, Moorthy RS, Ragunathan R (2020) Investigation on influence of dimpled surfaces on heat transfer enhancement and friction factor in solar water heater. J Therm Anal Calorim. https://doi.org/10.1007/s10973-020-09746-0
Marif Y, Benmoussa H, Bouguettaia H, Belhadj MM, Zerrouki M (2014) Numerical simulation of solar parabolic trough collector performance in the Algeria Saharan region. Energy Convers Manag 85:521–529. https://doi.org/10.1016/j.enconman.2014.06.002
Mart H, Almanza R, & Mazari M (2000). 1-s2.0-S0927024800000684-main. 64.
Meiser S, Schneider S, Lüpfert E, Schiricke B, Pitz-Paal R (2015) Evaluation and Assessment of Gravity Load on Mirror Shape of Parabolic Trough Solar Collectors. Energy Procedia 75:485–494. https://doi.org/10.1016/j.egypro.2015.07.434
Mohamed AMI, Elminshawy NAS (2011) Theoretical investigation of solar humidification-dehumidification desalination system using parabolic trough concentrators. Energy Convers Manag 52(10):3112–3119. https://doi.org/10.1016/j.enconman.2011.04.026
Montes MJ, Abánades A, Martínez-Val JM, Valdés M (2009) Solar multiple optimization for a solar-only thermal power plant, using oil as heat transfer fluid in the parabolic trough collectors. Sol Energy 83(12):2165–2176. https://doi.org/10.1016/j.solener.2009.08.010
Montes MJ, Rovira A, Muñoz M, Martínez-Val JM (2011) Performance analysis of an Integrated Solar Combined Cycle using Direct Steam Generation in parabolic trough collectors. Appl Energy 88(9):3228–3238. https://doi.org/10.1016/j.apenergy.2011.03.038
Morin G, Dersch J, Platzer W, Eck M, Häberle A (2012) Comparison of Linear Fresnel and Parabolic Trough Collector power plants. Sol Energy 86(1):1–12. https://doi.org/10.1016/j.solener.2011.06.020
Muñoz J, Abánades A (2011) Analysis of internal helically finned tubes for parabolic trough design by CFD tools. Appl Energy 88(11):4139–4149. https://doi.org/10.1016/j.apenergy.2011.04.026
Muñoz-Anton J, Biencinto M, Zarza E, Díez LE (2014) Theoretical basis and experimental facility for parabolic trough collectors at high temperature using gas as heat transfer fluid. Appl Energy 135:373–381. https://doi.org/10.1016/j.apenergy.2014.08.099
Naeeni N, Yaghoubi M (2007) Analysis of wind flow around a parabolic collector (1) fluid flow. Renew Energy 32(11):1898–1916. https://doi.org/10.1016/j.renene.2006.10.004
Norouzi AM, Siavashi M, Khaliji Oskouei MH (2020) Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles. Renew Energy 145:569–584. https://doi.org/10.1016/j.renene.2019.06.027
Okonkwo EC, Essien EA, Akhayere E, Abid M, Kavaz D, Ratlamwala TAH (2018) Thermal performance analysis of a parabolic trough collector using water-based green-synthesized nanofluids. Sol Energy 170(May):658–670. https://doi.org/10.1016/j.solener.2018.06.012
Ortega-Delgado B, García-Rodríguez L, Alarcón-Padilla DC (2016) Thermoeconomic comparison of integrating seawater desalination processes in a concentrating solar power plant of 5 MWe. Desalination 392:102–117. https://doi.org/10.1016/j.desal.2016.03.016
Padilla RV, Demirkaya G, Goswami DY, Stefanakos E, Rahman MM (2011) Heat transfer analysis of parabolic trough solar receiver. Appl Energy 88(12):5097–5110. https://doi.org/10.1016/j.apenergy.2011.07.012
Pasupathi MK, Alagar K, Michael Joseph Stalin P, Matheswaran MM, Aritra G (2020) Characterization of hybrid-nano/paraffin organic phase change material for thermal energy storage applications in solar thermal systems. Energies 13(19). https://doi.org/10.3390/en13195079
Peng S, Hong H, Jin H, Zhang Z (2013) A new rotatable-axis tracking solar parabolic-trough collector for solar-hybrid coal-fired power plants. Solar Energy, 98(PC), 492–502. https://doi.org/10.1016/j.solener.2013.09.039
Potenza M, Milanese M, Colangelo G, de Risi A (2017) Experimental investigation of transparent parabolic trough collector based on gas-phase nanofluid. Appl Energy 203:560–570. https://doi.org/10.1016/j.apenergy.2017.06.075
Qin C, Kim JB, Lee BJ (2019) Performance analysis of a direct-absorption parabolic-trough solar collector using plasmonic nanofluids. Renew Energy 143:24–33. https://doi.org/10.1016/j.renene.2019.04.146
Raj P, Subudhi S (2018) A review of studies using nano fl uids in fl at-plate and direct absorption solar collectors. Renew Sust Energ Rev 84(September 2016):54–74. https://doi.org/10.1016/j.rser.2017.10.012
Ramalingam VK, Karthick A, Jeyalekshmi MPV, Decruz AMMAJ, Manokar AM, Sathyamurthy R (2021) Enhancing the fresh water produced from inclined cover stepped absorber solar still using wick and energy storage materials. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-020-12030-1
Ramanan P, Kalidasa Murugavel K, Karthick A, Sudhakar K (2020) Performance evaluation of building-integrated photovoltaic systems for residential buildings in southern India. Build Serv Eng Res Technol 41(4):492–506. https://doi.org/10.1177/0143624419881740
Ravi Kumar K, Reddy KS (2009) Thermal analysis of solar parabolic trough with porous disc receiver. Appl Energy 86(9):1804–1812. https://doi.org/10.1016/j.apenergy.2008.11.007
Razmmand F, Mehdipour R, Mousavi SM (2019) A numerical investigation on the effect of nanofluids on heat transfer of the solar parabolic trough collectors. Appl Therm Eng 152(October 2018):624–633. https://doi.org/10.1016/j.applthermaleng.2019.02.118
Reddy KS, Kumar KR (2012) Solar collector field design and viability analysis of stand-alone parabolic trough power plants for Indian conditions. Energy Sustain Dev 16(4):456–470. https://doi.org/10.1016/j.esd.2012.09.003
Reddy KS, Ravi Kumar K, Ajay CS (2015) Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector. Renew Energy 77:308–319. https://doi.org/10.1016/j.renene.2014.12.016
Reddy KS, Singla H, Natraj (2019) Gravity & wind load analysis and optical study of solar parabolic trough collector with composite facets using optimized modelling approach. Energy 189:116065. https://doi.org/10.1016/j.energy.2019.116065
Rolim MM, Fraidenraich N, Tiba C (2009) Analytic modeling of a solar power plant with parabolic linear collectors. Sol Energy 83(1):126–133. https://doi.org/10.1016/j.solener.2008.07.018
Ruegamer T, Kamp H, Kuckelkorn T, Schiel W, Weinrebe G, Nava P, Riffelmann K, Richert T (2014) Molten salt for parabolic trough applications: System simulation and scale effects. Energy Procedia 49(0):1523–1532. https://doi.org/10.1016/j.egypro.2014.03.161
Sakhaei SA, Valipour MS (2020) Thermal performance analysis of a flat plate solar collector by utilizing helically corrugated risers: An experimental study. Sol Energy 207(July):235–246. https://doi.org/10.1016/j.solener.2020.06.023
Sallaberry F, Valenzuela L, Palacin LG (2017) On-site parabolic-trough collector testing in solar thermal power plants: Experimental validation of a new approach developed for the IEC 62862-3-2 standard. Sol Energy 155:398–409. https://doi.org/10.1016/j.solener.2017.06.045
Sandá A, Moya SL, Valenzuela L (2019) Modelling and simulation tools for direct steam generation in parabolic-trough solar collectors: A review. Renew Sust Energ Rev 113(August):109226. https://doi.org/10.1016/j.rser.2019.06.033
Sathyamurthy R, El-Agouz SA, Nagarajan PK, Subramani J, Arunkumar T, Mageshbabu D, Madhu B, Bharathwaaj R, Prakash N (2017) A Review of integrating solar collectors to solar still. Renew Sust Energ Rev 77(October 2016):1069–1097. https://doi.org/10.1016/j.rser.2016.11.223
Sathyamurthy R, Kabeel AE, Chamkha A, Karthick A, Muthu Manokar A, Sumithra MG (2020) Experimental investigation on cooling the photovoltaic panel using hybrid nanofluids. Appl Nanosci (Switzerland) 11:363–374. https://doi.org/10.1007/s13204-020-01598-2
Sebastin S, Priya AK, Karthick A, Sathyamurthy R, Ghosh A (2020) Agro Waste Sugarcane Bagasse as a Cementitious Material for Reactive Powder Concrete. Clean Technol 2(4):476–491. https://doi.org/10.3390/CLEANTECHNOL2040030
Senthilkumar S, Karthick A, Madavan R, Arul Marcel Moshi A, Sundara Bharathi SR, Saroja S, Sowmya Dhanalakshmi C (2021) Optimization of transformer oil blended with natural ester oils using Taguchi-based grey relational analysis. Fuel 288(November 2020):119629. https://doi.org/10.1016/j.fuel.2020.119629
Singh I, Kumari K, Multani S, Goyal P (2020) Fabrication and analysis of Zinc coated Galvanized plain sheet based parabolic trough collector for solar energy application. Materials Today: Proceedings, 28, 1335–1339. https://doi.org/10.1016/j.matpr.2020.04.653
Spirkl W, Ries H, Muschaweck J, Timinger A (1997) Optimized compact secondary reflectors for parabolic troughs with tubular absorbers. Sol Energy 61(3):153–158. https://doi.org/10.1016/S0038-092X(97)00047-9
Subramani J, Nagarajan PK, Mahian O, Sathyamurthy R (2018) Efficiency and heat transfer improvements in a parabolic trough solar collector using TiO2 nanofluids under turbulent flow regime. Renew Energy 119:19–31. https://doi.org/10.1016/j.renene.2017.11.079
Sudalaiyandi K, Alagar K, Vignesh Kumar R, Manoj Praveen VJ, Madhu P (2021) Performance and emission characteristics of diesel engine fueled with ternary blends of linseed and rubber seed oil biodiesel. Fuel 285(August 2020):119255. https://doi.org/10.1016/j.fuel.2020.119255
Suman, S., Kaleem, M., & Pathak, M. (2015). Performance enhancement of solar collectors — A review. 49, 192–210.
Tagle-Salazar PD, Nigam KDP, Rivera-Solorio CI (2018) Heat transfer model for thermal performance analysis of parabolic trough solar collectors using nanofluids. Renew Energy 125:334–343. https://doi.org/10.1016/j.renene.2018.02.069
Tao YB, He YL (2010) Numerical study on coupled fluid flow and heat transfer process in parabolic trough solar collector tube. Sol Energy 84(10):1863–1872. https://doi.org/10.1016/j.solener.2010.07.012
Thappa S, Chauhan A, Anand Y, Anand S (2020) Analytical comparison of two distinct receiver tubes of a parabolic trough solar collector system for thermal application. Materials Today: Proceedings 28:2212–2217. https://doi.org/10.1016/j.matpr.2020.04.257
Too YCS, Benito R (2013) Enhancing heat transfer in air tubular absorbers for concentrated solar thermal applications. Appl Therm Eng 50(1):1076–1083. https://doi.org/10.1016/j.applthermaleng.2012.06.025
Valan Arasu A, Sornakumar T (2007) Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectors. Sol Energy 81(10):1273–1279. https://doi.org/10.1016/j.solener.2007.01.005
Valenzuela L, López-Martín R, Zarza E (2014) Optical and thermal performance of large-size parabolic-trough solar collectors from outdoor experiments: A test method and a case study. Energy 70:456–464. https://doi.org/10.1016/j.energy.2014.04.016
Valenzuela L, Setien E, Zarza E (2020) Analysis of a failure mechanism in parabolic troughs receivers due to bellows cap overirradiation. Eng Fail Anal 111(March):104491. https://doi.org/10.1016/j.engfailanal.2020.104491
Wang Y, Xu J, Liu Q, Chen Y, Liu H (2016) Performance analysis of a parabolic trough solar collector using Al2O3/synthetic oil nanofluid. Appl Therm Eng 107:469–478. https://doi.org/10.1016/j.applthermaleng.2016.06.170
Wang Z, Ni J, Zhao L, Deng S, Zhao D (2017) Simulation and optimization of parabolic trough receiver with non-uniform heat flux distribution: A review. Energy Procedia 142:700–707. https://doi.org/10.1016/j.egypro.2017.12.115
Widyolar B, Jiang L, Ferry J, Winston R, Cygan D, Abbasi H (2019) Experimental performance of a two-stage (50×) parabolic trough collector tested to 650 °C using a suspended particulate heat transfer fluid. Appl Energy 240(February):436–445. https://doi.org/10.1016/j.apenergy.2019.02.073
Winkelmann U, Kämper C, Höffer R, Forman P, Ahrens MA, Mark P (2020) Wind actions on large-aperture parabolic trough solar collectors: Wind tunnel tests and structural analysis. Renew Energy 146:2390–2407. https://doi.org/10.1016/j.renene.2019.08.057
Zaversky F, García-Barberena J, Sánchez M, Astrain D (2012) Probabilistic modeling of a parabolic trough collector power plant - An uncertainty and sensitivity analysis. Sol Energy 86(7):2128–2139. https://doi.org/10.1016/j.solener.2012.04.015
Zaversky F, Medina R, García-Barberena J, Sánchez M, Astrain D (2013) Object-oriented modeling for the transient performance simulation of parabolic trough collectors using molten salt as heat transfer fluid. Sol Energy 95:192–215. https://doi.org/10.1016/j.solener.2013.05.015
Zhang L, Wang W, Yu Z, Fan L, Hu Y, Ni Y, Fan J, Cen K (2012) An experimental investigation of a natural circulation heat pipe system applied to a parabolic trough solar collector steam generation system. Sol Energy 86(3):911–919. https://doi.org/10.1016/j.solener.2011.11.020
Zhang L, Yang MC, Zhu YZ, Chen HJ (2015) Numerical Study and Optimization of Mirror Gap Effect on Wind Load on Parabolic Trough Solar Collectors. Energy Procedia 69:233–241. https://doi.org/10.1016/j.egypro.2015.03.027
Zhao D, Xu E, Wang Z, Yu Q, Xu L, Zhu L (2016) Influences of installation and tracking errors on the optical performance of a solar parabolic trough collector. Renew Energy 94:197–212. https://doi.org/10.1016/j.renene.2016.03.036
Zhao Z, Bai F, Zhang X, Wang Z (2020) Experimental study of pin finned receiver tubes for a parabolic trough solar air collector. Sol Energy 207(6):91–102. https://doi.org/10.1016/j.solener.2020.06.070
Zhu S, Yu G, Ma Y, Cheng Y, Wang Y, Yu S, Wu Z, Dai W, Luo E (2019) A free-piston Stirling generator integrated with a parabolic trough collector for thermal-to-electric conversion of solar energy. Appl Energy 242(March):1248–1258. https://doi.org/10.1016/j.apenergy.2019.03.169
Zou B, Dong J, Yao Y, Jiang Y (2017) A detailed study on the optical performance of parabolic trough solar collectors with Monte Carlo Ray Tracing method based on theoretical analysis. Sol Energy 147:189–201. https://doi.org/10.1016/j.solener.2017.01.055
Author information
Authors and Affiliations
Contributions
Rasaiah Naveenkumar, Manickam Ravichandran Conceptualization, Alagar Karthick Supervision, Balasubramaniam Stalin, Aritra Ghosh, Sundar Raj Leo Aswin, Methodology, Alagar Karthick, Balasubramaniam Stalin: investigations, writing—Shanmugavelan Pradeep Kumar, Sundramurthy Kiran Kumar, Rasaiah Naveenkumar, Manickam Ravichandran, original draft Swaminathan Shanmugasundaram. Harini Priyanka: writing—original draft, Aritra Ghosh, Alagar Karthick validation.
Corresponding author
Ethics declarations
Ethics approval
Not applicable
Consent to participate
Not applicable
Consent for publication
Not applicable
Competing interests
The authors declare that they have no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Naveenkumar, R., Ravichandran, M., Stalin, B. et al. Comprehensive review on various parameters that influence the performance of parabolic trough collector. Environ Sci Pollut Res 28, 22310–22333 (2021). https://doi.org/10.1007/s11356-021-13439-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-021-13439-y