Skip to main content

Advertisement

SpringerLink
Log in

Range Extension in IEEE 802.11ah Systems Through Relaying

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

A great number of Internet of Things (IoT) and machine-to-machine (M2M) based applications, which are telecommunication areas with the highest foreseen growth in the future years, require energy efficient, long range and low data rate wireless communication links. In order to offer a competitive solution in these areas, IEEE 802.11 standardization group has defined the “ah” amendment, the first sub-1 GHz WLAN standard, with flexible channel bandwidths, starting from 1 MHz, up to 16 MHz, and many other physical and link layer improvements, enabling long-range and energy efficient communications. However, for some regions, like Europe, the maximum transmitted power in dedicated frequency band is limited to only 10 mW, thus disabling the achievement of ranges which would be close to targeted of up to 1 km. In this paper we examine possibilities for range extension through implementation of half-duplex decode-and forward (DF) relay station (RS) in communication between an access point (AP) and an end-station (ST). Assuming a Rician fading channel between AP and RS, and a Rayleigh fading channel on RS–ST link, we analytically derive results on achievable ranges for the most robust modulation and coding schemes (MCSs), both on downlink (DL) and uplink (UL). Analyses are performed for two different standard adopted deployment scenarios on RS–ST link, and variable end-to-end link outage probabilities. Moreover, we have analyzed whether the considered most robust MCSs, known for supporting the longest range, but the lowest data rates, can meet the defined requirement of at least 100 kb/s for the greatest attainable AP–RS–ST distances. We examine data rate enhancements, brought by coding and using of short packets, for both DL and UL. Finally, we present bit error rate results, obtained through simulations, of a dual-hop DF IEEE 802.11ah relay system for the considered MCs. All presented results confirm that IEEE 802.11ah systems through deployment of relay stations, become an interesting solution for M2M and IoT based applications, due to flexibility they offer in many aspects, meeting requirements for wide transmission ranges in such applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Evans, D. (2011). The internet of things—how the next evolution of the Internet is changing everything, Cisco internet business solutions group (IBSG).

  2. Park, M. (2015). IEEE 802.11ah: Sub-1-GHz license-exempt operation for the internet of things. IEEE Communications Magazine, 53(9), 145–151.

    Article  Google Scholar 

  3. IEEE Standard 802.11ah, 2016 (2017). 802.11ah-2016-IEEE approved draft standard for information technology—telecommunications and information exchange between systems-local and metropolitan area networks-specific requirements-part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications: amendment 2: Sub 1 GHz license exempt operation, February 2017

  4. Aust, S., & Ito, T. (2012). Sub 1 GHz wireless LAN propagation path loss models for urban smart grid applications. International conference on computing, networking and communications (ICNC), (pp. 116–120), January 30–February 2 2012.

  5. Hazmi, A., Rinne, J., & Valkama, M. (2012). Feasibility study of IEEE 802.11ah radio technology for IoT and M2M use cases. GC’12 Workshop: 2nd international workshop on machine-to- machine communications ‘Key’ to the future internet of things, (pp. 1687–1692).

  6. Adame, T., Bel, A., Bellalta, B., Barcelo, J., & Oliver, M. (2014). IEEE 802.11ah: the WiFi approach for M2M communications. IEEE Wireless Communications, 21(6), 144–152.

    Article  Google Scholar 

  7. Khorov, E., Lyakhov, A., Krotov, A., & Guschin, A. (2015). A survey on IEEE 802.11ah: An enabling networking technology for smart cities. Computer Communications, 58, 53–69.

    Article  Google Scholar 

  8. Aust, S., Prasad, R., & Niemegeers, I. G. M. M. (2015). Outdoor long-range WLANs: A lesson for IEEE 802.11ah. IEEE Communications Surveys and Tutorials, 17(3), 1761–1775.

    Article  Google Scholar 

  9. Sun, W., Choi, M., & Choi, S. (2013). IEEE 802.11ah: A long range 802.11 WLAN at Sub 1 GHz. River publisher journal, Article 2245 800X 115

  10. Domazetović, B., Kočan, E., & Mihovska, A. (2016). Performance evaluation of IEEE 802.11ah systems. In telecommunications forum (TELFOR), 24th, (pp. 1–4).

  11. Argyriou, A. (2015). Power-efficient estimation in IEEE 802.11ah wireless sensor networks with a cooperative relay. IEEE International Conference on Communications (ICC), 2015, 6755–6760.

    Google Scholar 

  12. Venkatasubramanian, S. N., Haneda, K., & Yamamoto, K. (2015). System-level performance of band full-duplex relaying on M2M systems at 920 MHz. IEEE vehicular technology conference (VTC Spring), 81st, (pp. 1–5).

  13. Park, M. (2013). IEEE 802.11 wireless LANs specification framework for TGah doc. IEEE 802.11-11/1137r15doc.

  14. Aust, S., Prasad, R., & Niemegeers, I. G. M. M. (2012). IEEE 802.11ah: Advantages in standards and further challenges for sub 1 GHz Wi-Fi. IEEE International Conference on Communications (ICC), 2012, 6885–6889.

    Google Scholar 

  15. Ponnampalam, V., Wang, V., & Porat, R. (2011). IEEE P802.11 wireless LANs TGah-outdoor channel models. IEEE 802.11-11/0760r2, 2011.

  16. Molisch, A. F. (2011). Wireless Communications (2nd ed.). United Kingdom: Wiley.

    Google Scholar 

  17. IEEE 802.11ah/D5.0, “Draft for information technology—telecommunications and information exchange between systems—local and metropolitan area networks—specific requirements—part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications—amendment 6: Sub 1 GHz license exempt operation.”

  18. Richardson, T., & Urbanke, R. (2011). Efficient encoding of lowdensity parity-check codes. IEEE Trans. Inform. Theory, 47(2), 638–656.

    Article  MATH  Google Scholar 

Download references

Acknowledgement

This work has been supported by the Ministry of Science of Montenegro and the HERIC project through the BIO-ICT Centre of Excellence (Contract No. 01-1001).

Author information

Authors and Affiliations

  1. Faculty of Electrical Engineering, University of Montenegro, Podgorica, Montenegro

    Enis Kocan & Milica Pejanovic-Djurisic

  2. Broadcasting center Montenegro, Podgorica, Montenegro

    Bojan Domazetovic

Authors
  1. Enis Kocan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Bojan Domazetovic
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Milica Pejanovic-Djurisic
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Enis Kocan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kocan, E., Domazetovic, B. & Pejanovic-Djurisic, M. Range Extension in IEEE 802.11ah Systems Through Relaying. Wireless Pers Commun 97, 1889–1910 (2017). https://doi.org/10.1007/s11277-017-4334-9

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-017-4334-9

Keywords

Search

Navigation