Abstract
This work presents an amino acid-derived urea as the low molecular weight gelators (LMWGs) to solidify a variety of base-lubricating oils as well as different organic solvents. LMWGs self-assemble to form fibrous structures by intermolecular hydrogen bonding and van der Waals forces, and the gelation mechanism was proposed according to the NMR analysis. The obtained gels can liquefy upon heating and gelate again after cooling down, showing reversible temperature-induced phase transition. They showed good thixotropic characteristics so that they became mobile under shearing. Therefore, it a great advantage of these supramolecular gels to be used as potential high-performance semisolid lubricants, which can guarantee both good lubrication and the ability to restrain base oil creeping, oil permeation, or leakage, especially for the gears and rolling bearings. The tribological testing results suggest that these gel lubricants could effectively reduce friction and wear of sliding pairs compared with the corresponding blank base oils and greases.
Similar content being viewed by others
References
Buerkle, L.E., Rowan, S.J.: Supramolecular gels formed from multi-component low molecular weight species. Chem. Soc. Rev. 41, 6089–6102 (2012)
Pal, A., Ghosh, Y.K., Bhattacharya, S.: Molecular mechanism of physical gelation of hydrocarbons by fatty acid amides of natural amino acids. Tetrahedron 63, 7334–7348 (2007)
Li, Y., Wang, X., Yu, T., Ma, Z., Yu, X., Xing, S.: A new photo-responsive organogel containing benzophenone group. Supramol. Chem. 26, 2–6 (2013)
Reichwagen, J., Hopf, H., Guerzo, A.D., Belin, C., Bouas-Laurent, H., Desvergne, J.P.: Synthesis of 2,3-substituted tetracenes and evaluation of their self-assembling properties in organic solvents. Org. Lett. 7, 971–974 (2005)
Yan, N., Xu, Z., Diehn, K., Raghavan, S., Fang, Y., Weiss, R.G.: Pyrenyl-linker-glucono gelators. Correlations of gel properties with gelator structures and characterization of solvent effects. Langmuir 29, 793–805 (2013)
Abdallah, D.J., Weiss, R.G.: n-Alkanes gel n-Alkanes (and many other organic liquids). Langmuir 16, 352–355 (2000)
Cao, X., Zhao, X., Gao, A., Xu, R.: Organogel formation based on bis-urea derivative. Supramol. Chem. 26, 1–6 (2014)
Oda, R., Huc, I., Candau, S.J.: Gemini surfactants as new low molecular weight gelators of organic solvents and water. Angew. Chem. Int. Ed. 37, 2689–2691 (1998)
Ishioka, Y., Minakuchi, N., Mizuhata, M., Maruyama, T.: Supramolecular gelators based on benzenetricarboxamides for ionic liquids. Soft Matter 10, 965–971 (2014)
MakarevicÂ, J., Jokić, M., Perić, B., TomiŠić, V., Kojić –Prodić, B., Žinić, M.: Bis(amino acid) oxalyl amides as ambidextrous gelators of water and organic solvents supramolecular gels with temperature dependent assembly dissolution equilibrium. Chem. Eur. J. 7, 3328–3341 (2001)
Bhuniya, S., Park, S.M., Kim, B.H.: Biotin–amino acid conjugates: An approach toward self-assembled hydrogelation. Org. Lett. 7, 1741–1744 (2005)
Pal, A., Patra, T., Dey, J.: Physical gelation of organic liquids by achiral amino acid based amphiphilic gelators: effect of chirality. Chin. Chem. Lett. 556, 245–250 (2013)
Li, Y., Liu, K., Liu, J., Peng, J., Feng, X., Fang, Y.: Amino acid derivatives of cholesterol as “latent” organogelators with hydrogen chloride as a protonation reagent. Langmuir 22, 7016–7020 (2006)
Samai, S., Dey, J., Biradha, K.: Amino acid based low-molecular-weight tis(bis-amido) organogelators. Soft Matter 7, 2121–2126 (2011)
Saha, S., Bachl, J., Kundu, T., Diaz, D.D., Banerjee, R.: Amino acid-based multiresponsive low-molecular weight metallohydrogels with load-bearing and rapid self-healing abilities. Chem. Commun. 50, 3004–3006 (2014)
Basak, S., Nanda, J., Banerjee, A.: Multi-stimuli responsive self-healing metallo-hydrogels: tuning of the gel recovery property. Chem. Commun. 50, 2356–2359 (2014)
Matta, C., Joly-Pottuz, L., De Barros Bouchet, M., Martin, J., Kano, M., Zhang, Q., Goddard, W.: Superlubricity and tribochemistry of polyhydric alcohols. Phys. Rev. B. 78, 085436 (2008)
Cai, M., Guo, R., Zhou, F., Liu, W.: Lubricating a bright future: lubrication contribution to energy saving and low carbon emission. Sci. China: Technol. Sci. 56, 2888–2913 (2013)
Nobuyoshi, O., Sobahan, M., Kazuo, M., Kentaro, S., Yuji, Y., Yoshitaka, T., Shigeki, M., Yuji, S.: Tribological properties and film formation behavior of thermoreversible gel lubricants. Tribol. Trans. 53, 722–730 (2010)
Takahashi, K., Shitara, Y., Kaimai, T., Kanno, A., Mori, S.: Lubricating properties of TR gel-lube—Influence of chemical structure and content of gel agent. Tribol. Int. 43, 1577–1583 (2010)
Cai, M., Liang, Y., Zhou, F., Liu, W.: Functional ionic gels formed by supramolecular assembly of a novel low molecular weight anticorrosive/antioxidative gelator. J. Mater. Chem. 21, 13399–13405 (2011)
Yu, Q., Fan, M., Li, D., Song, Z., Cai, M., Zhou, F., Liu, W.: Thermoreversible gel lubricants through universal supramolecular assembly of a nonionic surfactant in a variety of base lubricating liquids. ACS Appl. Mater. Interfaces 6, 15738–15794 (2014)
Minakuchi, N.H., Yamaki, K., Tenno, D., Nakashima, S., Goto, K., Mizuhata, M., Maruyama, T.: Versatile supramolecular gelators that can harden water, organic solvents and ionic liquids. Langmuir 28, 9259–9266 (2012)
Wei, J., Cai, M., Zhou, F., Liu, W.: Candle soot as particular lubricant additives. Tribol. Lett. 53, 521–531 (2014)
Li, D., Gao, P., Sun, X., Zhang, S., Zhou, F., Liu, W.: The study of TEMPOs As additives in different lubrication oils for steel/steel contacts. Tribol. Int. 73, 83–87 (2014)
Pal, A., Voudouris, P., Koenigs, M.M.E., Besenius, P., Wyss, H.M., Degirmenci, V., Sijbesma, R.P.: Topochemical polymerization in self-assembled rodlike micelles of bisurea bolaamphiphiles. Soft Matter 10, 952–956 (2014)
Loos, M.D., Ligtenbarg, A.G.J., Esch, J.V., Kooijman, H., Spek, A.L., Hage, R., Kellogg, R.M., Feringa, B.L.: Tripodal tris-urea derivatives as gelators for organic solvents. Eur. J. Org. Chem. 2000, 3675–3678 (2000)
Goh, C.Y., Mocerino, M., Ogden, M.I.: Macrocycl. Gel. Supramol. Chem. 25, 555–566 (2013)
Skilling, K.J., Citossi, F., Bradshaw, T.D., Ashford, M., Kellam, B., Marlow, M.: Insights into low molecular mass organic gelators: a focus on drug delivery and tissue engineering applications. Soft Matter 10, 237–256 (2014)
Babu, S., Praveen, V., Ajayaghosh, A.: Functional π-gelators and their applications. Chem. Rev. 114, 1933–2129 (2014)
Basit, H., Pal, A., Sen, S., Bhattacharya, S.: Two-component hydrogels comprising fatty acids and amines: structure, properties, and application as a template for the synthesis of metal nanoparticles. Chem. Eur. J. 14, 6534–6545 (2008)
Wang, D., Hao, J.: Multiple-stimulus-responsive hydrogels of cationic surfactants and azoic salt mixtures. Colloid Polym. Sci. 291, 2935–2946 (2013)
Suzuki, M., Nakajima, Y., Yumoto, M., Kimura, M., Shirai, H., Hanabusa, K.: Effects of hydrogen bonding and van der waals interactions on organogelation using designed low-molecular-weight gelators and gel formation at room temperature. Langmuir 19, 8622–8624 (2003)
Wang, C., Zhang, D., Zhu, D.: A chiral low-molecular-weight gelator based on binaphthalene with two urea moieties modulation of the CD spectrum after gel formation. Langmuir 23, 1478–1482 (2007)
Duncan, D.C., Whitten, D.G.: 1H NMR Investigation of the composition, structure, and dynamics of cholesterol–stilbene tethered dyad organogels. Langmuir 16, 6445–6452 (2000)
Allix, F., Curcio, P., Pham, Q.N., Pickaert, G., Jamart-Gregoire, B.: Evidence of intercolumnar π–π stacking interactions in amino-acid-based low-molecular-weight organogels. Langmuir 26, 16818–16827 (2010)
Nandi, S., Altenbach, H.J., Jakob, B., Lange, K., Ihizane, R., Schneider, M.P., Gün, Ü., Mayer, A.: Amphiphiles based on d-glucose efficient low molecular weight gelators. Org. Lett. 14, 3826–3829 (2012)
Mandal, D., Kar, T., Das, P.K.: Pyrene-based fluorescent ambidextrous gelators: scaffolds for mechanically robust SWNT-gel nanocomposites. Chem. Eur. J. 20, 1349–1358 (2014)
Rodriguez-Llansola, F., Hermida-Merino, D., Nieto-Ortega, B., Ramirez, F.J., Navarrete, J.T., Casado, J., Hamley, I.W., Escuder, B., Hayes, W., Miravet, J.F.: Assembly studies of a chiral bisurea-based superhydrogelator. Chem. Eur. J. 18, 14725–14731 (2012)
Cai, M., Liang, Y., Yao, M., Xia, Y., Zhou, F., Liu, W.: Imidazolium ionic liquids as antiwear and antioxidant additive in poly(ethylene glycol) for steel/steel contacts. ACS Appl. Mater. Interfaces 2, 870–876 (2010)
Daisuke, T., Sobahan, M., Shigeki, M., Nobuyoshi, O., Yuji, S.: EHL oil film behavior of thermo-reversible gel-lubricants. Tribol. Online 3, 90–93 (2008)
Yuji, S., Aoi, K., Takashi, K., Shigeyuki, M.: Effect of amide molecular structure on tribological properties of thermoreversible gel lubricant. Tribol. Online 5, 284–290 (2010)
National Institute of Standards and Technology. NIST X-ray Photoelectron Spectroscopy Database, version 4.1, 2012. http://srdata.nist.gov/xps/
Cai, M., Zhao, Z., Liang, Y., Zhou, F., Liu, W.: Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts. Tribol. Lett. 40, 215–224 (2010)
Cai, M., Liang, Y., Zhou, F., Liu, W.: A novel imidazolium salt with antioxidation and anticorrosion dual functionalities as the additive in poly(ethylene glycol) for steel/steel contacts. Wear 306, 197–208 (2013)
Song, Z., Fan, M., Liang, Y., Zhou, F., Liu, W.: Lithium-based ionic liquids: in situ-formed lubricant additive only by blending. Tribol. Lett. 49, 127–133 (2012)
Acknowledgments
The authors acknowledge the financial support from the NSFC (51305428, 21173243), ‘‘973’’ program (2013CB632301) and West Light Foundation of the Chinese Academy of Sciences.
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Yu, Q., Li, D., Cai, M. et al. Supramolecular Gel Lubricants Based on Amino Acid Derivative Gelators. Tribol Lett 61, 16 (2016). https://doi.org/10.1007/s11249-015-0634-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11249-015-0634-y