Abstract
This study combines clay adsorption properties with magnetic iron oxide properties to create a composite magnetic adsorbent for removing Acid Fuchsin Dye (AFD) from laboratory effluents. The research focuses on characterizing clay minerals, particularly investigating interlayer spacing in smectites using FTIR, BET, and SEM with EDX elemental mapping. Synthesizing Magnetic Oxide Nano-Porous Clay (MONPC) approximately doubles the specific surface area (10.02 to 18.03 m2 g−1) compared to Natural Clay. Using an adsorbent concentration of 0.1 g/L, MONPC completely removes AFD from initial dye solutions at a 400 mg/L concentration due to strong hydrogen bonding and Lewis interaction, as observed in the adsorption mechanism study. The Pseudo-Second-Order model accurately represents the chemisorption process of AFD, while the Freundlich isotherm model consistently fits the data better than the Langmuir model. Thermodynamic analysis confirms the exothermic and spontaneous nature of the adsorption process, with significant entropic changes at the solid–liquid interface. These findings suggest favorable enthalpy but unfavorable entropy for the adsorption of AFD onto MONPC. MONPC's high surface area and enhanced adsorption capacity hold tremendous potential as an effective adsorbent for removing AFD in wastewater treatment applications.
Graphical abstract
Similar content being viewed by others
Data availability
The data that support the findings of this study are available as requested by Co-Author.
References
Ighalo JO, Omoarukhe FO, Ojukwu VE et al (2022) Cost of adsorbent preparation and usage in wastewater treatment: a review. Clean Chem Eng 3:100042. https://doi.org/10.1016/j.clce.2022.100042
Iwuozor KO, Abdullahi TA, Ogunfowora LA et al (2021) Mitigation of levofloxacin from aqueous media by adsorption: a review. Sustain Water Resour Manag 7:100. https://doi.org/10.1007/s40899-021-00579-9
Ahmed HR, Raheem SJ, Aziz BK (2017) Removal of Leishman stain from aqueous solutions using natural clay of Qulapalk area of Kurdistan region of Iraq. Karbala Int J Mod Sci 3:165–175. https://doi.org/10.1016/j.kijoms.2017.05.002
Gogoi H, Leiviskä T, Rämö J, Tanskanen J (2021) Acid mine drainage treatment with novel high-capacity bio-based anion exchanger. Chemosphere 264:128443. https://doi.org/10.1016/j.chemosphere.2020.128443
Igwegbe CA, Onukwuli OD, Ighalo JO et al (2021) Comparative analysis on the electrochemical reduction of colour, COD and turbidity from municipal solid waste leachate using aluminium, iron and hybrid electrodes. Sustain Water Resour Manag 7:39. https://doi.org/10.1007/s40899-021-00524-w
Bayat M, Javanbakht V, Esmaili J (2018) Synthesis of zeolite/nickel ferrite/sodium alginate bionanocomposite via a co-precipitation technique for efficient removal of water-soluble methylene blue dye. Int J Biol Macromol 116:607–619. https://doi.org/10.1016/j.ijbiomac.2018.05.012
Deghles A, Kurt U (2016) Treatment of tannery wastewater by a hybrid electrocoagulation/electrodialysis process. Chem Eng Process Process Intensif 104:43–50
Ighalo JO, Kurniawan SB, Iwuozor KO et al (2022) A review of treatment technologies for the mitigation of the toxic environmental effects of acid mine drainage (AMD). Process Saf Environ Prot 157:37–58. https://doi.org/10.1016/j.psep.2021.11.008
Fayazi M, Afzali D, Taher MA et al (2015) Removal of Safranin dye from aqueous solution using magnetic mesoporous clay: optimization study. J Mol Liq 212:675–685. https://doi.org/10.1016/j.molliq.2015.09.045
Ahmed H, Salihi K, Kaufhold S et al (2023) Efficient removal of basic Fuchsin from synthetic medical wastewater and competitive adsorption in the mixture. Adsorpt Sci Technol. https://doi.org/10.1155/2023/4672622
Ahmed HR, Radha FHS, Agha NNM et al (2023) Characterization and evaluation of Moringa oleifera leaves green powder and its alkali-activated form as eco-friendly biosorbent for the effective removal of safranin dye from synthetic wastewater. React Kinet Mech Catal. https://doi.org/10.1007/s11144-023-02438-4
Bergaya F, Lagaly G (2006) Chapter 1 general introduction: clays, clay minerals, and clay science. In: Bergaya F, Theng BKG, Lagaly GBT (eds) Handbook of clay science. Elsevier, Amsterdam, pp 1–18
Grauby O, Petit S, Decarreau A, Baronnet A (1994) The nontronite-saponite series: an experimental approach. Eur J Mineral 6:99–112. https://doi.org/10.1127/ejm/6/1/0099
Wang X, Jiang C, Hou B et al (2018) Carbon composite lignin-based adsorbents for the adsorption of dyes. Chemosphere 206:587–596. https://doi.org/10.1016/j.chemosphere.2018.04.183
Diagboya PN, Dikio ED (2018) Scavenging of aqueous toxic organic and inorganic cations using novel facile magneto-carbon black-clay composite adsorbent. J Clean Prod 180:71–80. https://doi.org/10.1016/j.jclepro.2018.01.166
Wypych F, Adad LB, Mattoso N et al (2005) Synthesis and characterization of disordered layered silica obtained by selective leaching of octahedral sheets from chrysotile and phlogopite structures. J Colloid Interface Sci 283:107–112. https://doi.org/10.1016/j.jcis.2004.08.1394
Frini-Srasra N, Srasra E (2010) Acid treatment of south Tunisian palygorskite: Removal of Cd(II) from aqueous and phosphoric acid solutions. Desalination 250:26–34. https://doi.org/10.1016/j.desal.2009.01.043
Johnson B (2022) The object of investigation BT - making ammonia: Fritz Haber, Walther Nernst, and the nature of scientific discovery. Springer International Publishing, Cham, pp 3–7
Cornell RM, Schwertmann U (1996) ‘Book Review’ The iron oxides: structure, properties, reactions, occurrences, and uses. VCH Verlagsgesellschaft mbH, Weinheim
Szabó T, Bakandritsos A, Tzitzios V et al (2007) Magnetic iron oxide/clay composites: effect of the layer silicate support on the microstructure and phase formation of magnetic nanoparticles. Nanotechnology. https://doi.org/10.1088/0957-4484/18/28/285602
Abdullah NH, Shameli K, Abdullah EC, Abdullah LC (2019) Solid matrices for fabrication of magnetic iron oxide nanocomposites: synthesis, properties, and application for the adsorption of heavy metal ions and dyes. Compos Part B Eng 162:538–568. https://doi.org/10.1016/j.compositesb.2018.12.075
Oliveira LCA, Rios RVRA, Fabris JD et al (2003) Clay–iron oxide magnetic composites for the adsorption of contaminants in water. Appl Clay Sci 22:169–177. https://doi.org/10.1016/S0169-1317(02)00156-4
Shah KH, Ali S, Waseem M et al (2019) Native and magnetic oxide nanoparticles (Fe3O4) impregnated bentonite clays as economic adsorbents for Cr(III) removal. J Solution Chem 48:1640–1656. https://doi.org/10.1007/s10953-019-00912-z
Yamaura M, Camilo RL, Sampaio LC et al (2004) Preparation and characterization of (3-aminopropyl)triethoxysilane-coated magnetite nanoparticles. J Magn Magn Mater 279:210–217. https://doi.org/10.1016/j.jmmm.2004.01.094
Dong W, Ding J, Wang W et al (2020) Magnetic nano-hybrids adsorbents formulated from acidic leachates of clay minerals. J Clean Prod 256:120383. https://doi.org/10.1016/j.jclepro.2020.120383
Raigemborn M, Gómez-Peral L, Krause J, Matheos S (2014) Controls on clay minerals assemblages in an early paleogene nonmarine succession: implications for the volcanic and paleoclimatic record of extra-andean patagonia. Argentina J South Am Earth Sci. https://doi.org/10.1016/j.jsames.2014.02.001
Al-Wasidi AS, Katouah HA, Saad FA, Abdelrahman EA (2023) Functionalization of silica nanoparticles by 5-chloro-8-quinolinol as a new nanocomposite for the efficient removal and preconcentration of Al3+ Ions from water samples. ACS Omega 8:15276–15287. https://doi.org/10.1021/acsomega.3c00413
Langmuir I (1918) The adsorption of gases on plane surfaces of glass, mica and platinum. J Am Chem Soc 40:1361–1403. https://doi.org/10.1021/ja02242a004
Alqadami AA, Naushad M, Alothman ZA, Ahamad T (2018) Adsorptive performance of MOF nanocomposite for methylene blue and malachite green dyes: kinetics, isotherm and mechanism. J Environ Manage 223:29–36. https://doi.org/10.1016/j.jenvman.2018.05.090
Mohammad A, I Amin A et al (2012) Nicotinic acid adsorption thermodynamics study on carboxymethyl cellulose Ce(IV) molybdophosphate composite cation-exchanger. J Therm Anal Calorim. https://doi.org/10.1007/s10973-011-2169-2
Zhang Y, Ma X, Xu H et al (2016) Selective adsorption and separation through molecular filtration by hyperbranched poly(ether amine)/carbon nanotube ultrathin membranes. Langmuir 32:13073–13083. https://doi.org/10.1021/acs.langmuir.6b03689
Mollahosseini A, Toghroli M, Kamankesh M (2015) Zeolite/Fe3O4 as a new sorbent in magnetic solid-phase extraction followed by gas chromatography for determining phthalates in aqueous samples. J Sep Sci 38:3750–3757. https://doi.org/10.1002/jssc.201500510
Jia Z, Liu J, Wang Q et al (2015) Synthesis of 3D hierarchical porous iron oxides for adsorption of Congo red from dye wastewater. J Alloys Compd 622:587–595. https://doi.org/10.1016/j.jallcom.2014.10.125
You L, Huang C, Lu F et al (2018) Facile synthesis of high performance porous magnetic chitosan - polyethylenimine polymer composite for Congo red removal. Int J Biol Macromol 107:1620–1628. https://doi.org/10.1016/j.ijbiomac.2017.10.025
Wang L, Mao C, Sui N et al (2017) Graphene oxide/ferroferric oxide/polyethylenimine nanocomposites for Congo red adsorption from water. Environ Technol 38:996–1004. https://doi.org/10.1080/09593330.2016.1215352
Rahmani S, Zeynizadeh B, Karami S (2020) Removal of cationic methylene blue dye using magnetic and anionic-cationic modified montmorillonite: kinetic, isotherm and thermodynamic studies. Appl Clay Sci 184:105391. https://doi.org/10.1016/j.clay.2019.105391
Li Y, Bi HY, Liang YQ et al (2019) A magnetic core-shell dodecyl sulfate intercalated layered double hydroxide nanocomposite for the adsorption of cationic and anionic organic dyes. Appl Clay Sci 183:1–42. https://doi.org/10.1016/j.clay.2019.105309
Ouachtak H, El haouti R, Elguerdaoui A et al (2020) Experimental and molecular dynamics simulation study on the adsorption of Rhodamine B dye on magnetic montmorillonite composite γ-Fe 2 O 3 @Mt. J Mol Liq. https://doi.org/10.1016/j.molliq.2020.113142
Funding
The author received no financial support for this article’s research, authorship, and/or publication. University of Sulaimani
Author information
Authors and Affiliations
Contributions
Regarding ethical considerations, all authors have contributed to the manuscript, and have reviewed and approved the final version. The authors confirm that the data supporting the findings of this study are included in the article.
Corresponding author
Ethics declarations
Conflict of interest
The author has stated that there are no potential conflicts of interest regarding this article’s research, authorship, and/or publication.
Ethical approval
This study did not involve human or animal subjects. As such, formal ethical approval was not required. However, the research was conducted by the relevant ethical guidelines and principles, ensuring integrity, transparency, and adherence to professional standards.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ahmed, H.R., Shwan, D.M.S., Agha, N.N.M. et al. Magnetic oxide nano-porous adsorbents: a highly efficient approach for acid Fuchsin removal from medical laboratory effluents via adsorption process. Reac Kinet Mech Cat 136, 2203–2222 (2023). https://doi.org/10.1007/s11144-023-02446-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11144-023-02446-4