Skip to main content
SpringerLink
Log in

Interaction between Fe–Ti–B4C Powder Charge Components During Heating

  • Published:
Powder Metallurgy and Metal Ceramics Aims and scope

The structurization of compacted Fe–Ti–B4C powder mixtures during reaction synthesis is studied. X-ray diffraction of the material synthesized at 1200°C shows the presence of TiC and TiB2 phases formed in the interaction of titanium with carbon and boron resulting from the dissolution of B4C particles in the liquid phase and the interaction of iron with boron. The reaction between titanium, iron, and carbon (boron) is accompanied by a significant exothermic effect confirmed by the presence of two exothermic peaks on the DTA curve at 1085°C (corresponding to the eutectic formed in the Fe–Ti system in the interaction of respective mixture particles on contact surfaces) and 1236°C (resulting from the formation of titanium diboride and carbide particles from the liquid phase).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. J. Kübarsepp, Hard Metals with Steel Binder [in Russian], Valgus, Tallinn Technol. Univ., Tallinn (1991), p. 164.

    Google Scholar 

  2. Yu. G. Gurevich, V. K. Narva, and N. R. Frage, Carburized Steels [in Russian], Metallurgiya, Moscow (1988), p. 144.

    Google Scholar 

  3. Z. Q. Zhang, P. Shen, Y. Wang, et al., “Effect of Fe content in Fe–Ti–B system on fabricating TiB2 particulate,” J. Mater. Sci., 42, 8350–8356 (2007).

    Article  CAS  Google Scholar 

  4. H. Zhao and Y. Cheng, “Formation of TiB2–TiC composites by reactive sintering,” Ceram. Int., 25, 353–358 (1999).

    Article  CAS  Google Scholar 

  5. G. A. Baglyuk, L. O. Poznyak, and S. V. Tikhomirov, A Method of Producing Articles from Powder Composites [in Ukrainian], Ukrainian Patent 47662, IPC B22F3/16, Bulletin No. 7, Publ. July 15 (2002).

  6. G. A. Baglyuk, L. A. Pozniak, and S. V. Gumenyuk, “The production of wear-resistant steel composites through the formation of carbide phases from a matrix pseudoalloy,” in: Proc. 2nd Int. Conf. Materials and Coatings for Extreme Performances: Investigations, Applications, Ecologically Safe Technologies for Their Production and Utilization (September 16–20, 2002, Crimea, Ukraine), Kiev (2002), pp. 96–97.

  7. G. A. Baglyuk, L. A. Poznyak, and S. V. Gumenyuk, “Structure and properties of carburized steels produced through the formation of carbide phases from a matrix pseudoalloy,” in: Proc. 9th Int. Sem. Advances in the Development, Production, and Application of Tool Materials (September 4–6, 2002, Zaporozh'e) [in Russian], Kiev (2002), pp. 40–41.

  8. D. Brodkin, S. Kalidindi, M. Barsoum, and A. Zavaliangos, “Microstructural evolution during transient plastic phase processing of titanium carbide titanium boride composites,” J. Am. Ceram. Soc., 79, No. 7, 1945–1952 (1996).

    Article  CAS  Google Scholar 

  9. Y. W. Yan, B. K. Wei, Z. Y. Fu, et al., “The microstructure and property of in situ TiCp/Fe composites,” Acta Metall. Sin., 12, No. 4, 442–446 (1999).

    CAS  Google Scholar 

  10. Zhiqiang Zhang, Ping Shen, and Qichuan Jiang, “Differential thermal analysis (DTA) on the reaction mechanism in Fe–Ti–B4C system,” J. Alloys Compd., 498–502 (2008).

  11. Zhiqiang Zhang, Ping Shen, Yan Wang, et al., “Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe–Ti–B4C–C system by an SHS-casting route,” J. Mater. Sci., 42, No. 19, 8350–8356 (2006).

    Article  Google Scholar 

  12. Wang Xibao, Wang Xiaofeng, and Shi Zhongquan, “The composite Fe–Ti–B–C coatings by PTA powder surfacing process,” Surf. Coat. Technol., 192, 257–262 (2005).

  13. I. M. Fedorchenko, I. G. Slys’, and L. A. Sosnovskii, “Technology of sintering of powder metallurgical materials without a circulating protective atmosphere,” Powder Metall. Met. Ceram., 11, No. 5, 361–366 (1972).

    Article  Google Scholar 

  14. T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak, Binary Alloy Phase Diagrams, ASM International, Metals Park, Ohio (1996), p. 852.

    Google Scholar 

  15. P. S. Kislyi, M. A. Kuzenkova, N. I. Bodnaruk, and B. L. Grabchuk, Boron Carbide [in Russian], Naukova Dumka, Kiev (1988), p. 216.

    Google Scholar 

  16. A. L. Lasker, J. L. Bocquet, G. Brebec, and C. Monty, Diffusion in Materials, Physical Metallurgy: Handbook of Materials Modeling: Models, Kluwer, Dordrecht (1990), pp. 2222–2248.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev, Ukraine

    D. A. Goncharuk & G. A. Baglyuk

Authors
  1. D. A. Goncharuk
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. A. Baglyuk
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to G. A. Baglyuk.

Additional information

Translated from Poroshkovaya Metallurgiya, Vol. 51, No. 9–10 (487), pp. 58–65, 2012.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Goncharuk, D.A., Baglyuk, G.A. Interaction between Fe–Ti–B4C Powder Charge Components During Heating. Powder Metall Met Ceram 51, 547–553 (2013). https://doi.org/10.1007/s11106-013-9466-1

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11106-013-9466-1

Keywords

Search

Navigation