Abstract
A three-dimensional computational model is used to simulate the in-flight particle melting behavior during plasma spraying process. The stochastic model is used for the particle size distribution. The particles surface temperature distributions at various spray distances have been presented. The results show that the surface temperature distribution varies with the spray distance. Single peak to double peaks and back to single peak has been observed in the simulations and also in the experiment. The effects of particle size and its distribution and plasma composition on the pattern shift have been investigated. Understanding the pattern shift may enable the design of a good control indicator to determine the particle melting status.
Similar content being viewed by others
References
P. Fauchais (2004) J. Phys. D: Appl. Phys. 37 R86 Occurrence Handle10.1088/0022-3727/37/9/R02 Occurrence Handle2004JPhD...37R..86F
X. Chen J. Chen Y. D. Wang (1995) Plasma Chem. Plasma Process. 15 IssueID2 199 Occurrence Handle10.1007/BF01459696
Y. P. Wan V. Prasad G.-X. Wang S. Sampath J. R. Fincke (1999) J. Heat Transfer 121 691
I. Ahmed T. L. Bergman (2001) J. Heat Transfer 123 188 Occurrence Handle10.1115/1.1338117
J. He M. Ice E. Lavernia (2001) J. Thermal Spray Technol. 10 83
H. B. Xiong L. L. Zheng (2003) J. Materials Sci. Technol. 19 IssueIDs1 49 Occurrence Handle1973117
H. Zhang, H. B. Xiong, L. L. Zheng, A. Vaidya, L. Li, and S. Sampath, in Thermal Spray: Advancing the Science and Applying the Technology (B. M. Marple and C. Moreau, eds.), Pub. ASM International, Materials Park, Ohio, 2003, pp. 905–911.
M. Prystay P. Gougeon C. Moreau (2001) J. Thermal Spray Technol. 10 IssueID1 67
L. Zhao K. Seemann A. Fischer E. Lugscheider (2003) Surf. Coatings Technol. 168 186
T. Streibl, A. Vaidya, S. M. Friis, S. Vasudevan, and S. Sampath, Plasma Chem. Plasma Process. 26(1), (2006).
X. Chen E. Pfender (1982) Plasma Chem. Plasma Process. 2 IssueID2 185 Occurrence Handle10.1007/BF00633133
E. Pfender Y. C. Lee (1985) Plasma Chem. Plasma Process. 5 IssueID3 211 Occurrence Handle10.1007/BF00615122
C. H. Chang J. D. Ramshaw (1996) Plasma Chem. Plasma Process. 16 IssueID1 4s Occurrence Handle10.1007/BF01465215
P. Fauchais M. Vardelle A. Vardelle L. Bianchi A. C. Leger (1996) Plasma Chem. Plasma Process. 16 IssueID1 S99
R. L. Williamson J. R. Fincke C. H. Chang (2000) Plasma Chem. Plasma Process. 20 299 Occurrence Handle10.1023/A:1007088110319
D. T. Gawne B. Liu Y. Bao T. Zhang (2005) Surf. Coatings Technol. 191 242 Occurrence Handle10.1016/j.surfcoat.2004.02.032
H.-P. Li X. Chen (2002) Plasma Chem. Plasma Process. 22 27 Occurrence Handle10.1023/A:1012988430995
H. B. Xiong L. L. Zheng S. Sampath R. L. Williamson J. R. Fincke (2004) Int. J. Heat Mass Transfer 47 5189 Occurrence Handle10.1016/j.ijheatmasstransfer.2004.07.005
M. I. Boulos P. Fauchais E. Pfender (1994) Thermal Plasmas Fundamentals and Applications Plenum Press New York
Y. P. Wan J. R. Fincke S. Sampath V. Prasad H. Herman (2002) Int. J. Heat Mass Transfer 45 1007 Occurrence Handle10.1016/S0017-9310(01)00214-9
X. Chen (1988) Pure Appl. Chem. 60 IssueID5 651
J. R. Fincke, W. D. Swank, and D. C. Haggard, in A United Forum for Scientific and Technological Advances, Proceedings of the National Thermal Spray Conference, USA, (C. C. Berndt, ed.), ASM Int. OH, USA, 1997, pp. 335–342.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xiong, HB., Zheng, LL. & Streibl, T. A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Numerical Studies for YSZ. Plasma Chem Plasma Process 26, 53–72 (2006). https://doi.org/10.1007/s11090-005-8726-3
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s11090-005-8726-3