Skip to main content
Log in

Weighted squared envelope diversity entropy as a nonlinear dynamic prognostic measure of rolling element bearing

  • Original Paper
  • Published:
Nonlinear Dynamics Aims and scope Submit manuscript

Abstract

Being a new nonlinear dynamic measure, diversity entropy (DE) is a promising parameter for prognostics of a rolling element bearing by quantifying the complexity of collected vibration signals. However, in real-life prognostic maintenance operations, distinctive signal components corresponding to a bearing fault get submerged under unnecessary random noise components. As a result, DE not only performs poorly in incipient detection of bearing faults but also fails to track fault growth in an efficient manner. In this paper, to overcome the aforementioned limitations of DE in bearing health prognosis, unwanted noise components associated with collected vibration signals are suppressed by weighting corresponding squared envelope. Due to the involvement of the weighted squared envelope, the proposed measure is termed as weighted square envelope based DE (WSEDE). Two different run-to-failure experimental datasets are used to validate the proposed measure. The results demonstrate that the proposed WSEDE not only overcomes the weaknesses of original DE in bearing health prognosis but also performs better than conventional fuzzy entropy (FE) and an advanced DE-based measure multiscale DE (MDE).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

Data availability

Data of this study is available in a data repository.

References

  1. Kumar, A., Zhou, Y., Xiang, J.: Optimization of VMD using kernel-based mutual information for the extraction of weak features to detect bearing defects. Measurement 168, 108402 (2021)

    Article  Google Scholar 

  2. Cui, L., Li, B., Ma, J., et al.: Quantitative trend fault diagnosis of a rolling bearing based on Sparsogram and Lempel-Ziv. Measurement 128, 410–418 (2018)

    Article  Google Scholar 

  3. Wang, B., Lei, Y., Li, N., et al.: A hybrid prognostics approach for estimating remaining useful life of rolling element bearings. IEEE Trans. Reliab. 69(1), 401–412 (2020)

    Article  Google Scholar 

  4. Ben Ali, J., Chebel-Morello, B., Saidi, L., et al.: Accurate bearing remaining useful life prediction based on Weibull distribution and artificial neural network. Mech. Syst. Signal Process. 56–57, 150–172 (2015)

    Article  Google Scholar 

  5. Zhou, H., Huang, X., Wen, G., et al.: Construction of health indicators for condition monitoring of rotating machinery: A review of the research. Expert Syst. Appl. 203, 117297 (2022)

    Article  Google Scholar 

  6. Noman, K., He, Q., Peng, Z., et al.: A scale independent flexible bearing health monitoring index based on time frequency manifold energy & entropy. Meas. Sci. Technol. 31(11), 114003 (2020)

    Article  Google Scholar 

  7. Li, Y., Liu, F., Wang, S., et al.: Multiscale symbolic lempel–ziv: An effective feature extraction approach for fault diagnosis of railway vehicle systems. IEEE Trans. Industr. Inf. 17(1), 199–208 (2021)

    Article  Google Scholar 

  8. Li, Y., Wang, X., Liu, Z., et al.: The entropy algorithm and its variants in the fault diagnosis of rotating machinery: A review. IEEE Access 6, 66723–66741 (2018)

    Article  Google Scholar 

  9. Shannon, C.E.: A mathematical theory of communication. Bell Syst. Tech. J. 27(3), 379–423 (1948)

    Article  MathSciNet  MATH  Google Scholar 

  10. Yan, R., Gao, R.X.: Approximate entropy as a diagnostic tool for machine health monitoring. Mech. Syst. Signal Process. 21(2), 824–839 (2007)

    Article  Google Scholar 

  11. Richman, J.S., Moorman, J.R.: Physiological time-series analysis using approximate entropy and sample entropy. Am. J. Physiol. Heart Circulatory Physiol. 278(6), H2039–H2049 (2000)

    Article  Google Scholar 

  12. Costa, M., Goldberger, A.L., Peng, C.K.: Multiscale entropy analysis of complex physiologic time series. Phys. Rev. Lett. 89(6), 068102 (2002)

    Article  Google Scholar 

  13. Chen, W., Wang, Z., Xie, H., et al.: Characterization of surface EMG signal based on fuzzy entropy. IEEE Trans. Neural Syst. Rehabil. Eng. 15(2), 266–272 (2007)

    Article  Google Scholar 

  14. Bandt, C., Pompe, B.: Permutation entropy: A natural complexity measure for time series. Phys. Rev. Lett. 88(17), 174102 (2002)

    Article  Google Scholar 

  15. Wang, X., Si, S., Li, Y.: Multiscale diversity entropy: A novel dynamical measure for fault diagnosis of rotating machinery. IEEE Trans. Industr. Inf. 17(8), 5419–5429 (2021)

    Article  Google Scholar 

  16. Noman, K., Li, Y., Wang, S.: Continuous health monitoring of rolling element bearing based on nonlinear oscillatory sample entropy. IEEE Trans. Instrum. Meas. 71, 1–14 (2022)

    Article  Google Scholar 

  17. Lei, Y., Lin, J., He, Z., et al.: A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mech. Syst. Signal Process. 35(1), 108–126 (2013)

    Article  Google Scholar 

  18. Yongbo, L., Shubin, S., Zhiliang, L., et al.: Review of local mean decomposition and its application in fault diagnosis of rotating machinery. J. Syst. Eng. Electron. 30(4), 799–814 (2019)

    Article  Google Scholar 

  19. Wang, D.: Spectral L2/L1 norm: A new perspective for spectral kurtosis for characterizing non-stationary signals. Mech. Syst. Signal Process. 104, 290–293 (2018)

    Article  Google Scholar 

  20. Randall, R.B., Antoni, J., Chobsaard, S.: The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals. Mech. Syst. Signal Process. 15(5), 945–962 (2001)

    Article  Google Scholar 

  21. Takens, F.: Detecting strange attractors in turbulence. pp. 366–381.

  22. Liang, M., Soltani Bozchalooi, I.: An energy operator approach to joint application of amplitude and frequency-demodulations for bearing fault detection. Mech. Syst. Signal Process. 24(5), 1473–1494 (2010)

    Article  Google Scholar 

  23. Miao, Y., Zhao, M., Lin, J., et al.: Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings. Mech. Syst. Signal Process. 92, 173–195 (2017)

    Article  Google Scholar 

  24. Ye, X., Li, G., Meng, L. et al.: Dynamic health index extraction for incipient bearing degradation detection, ISA Transactions (2021).

  25. Xu, X., Zhao, M., Lin, J., et al.: Envelope harmonic-to-noise ratio for periodic impulses detection and its application to bearing diagnosis. Measurement 91, 385–397 (2016)

    Article  Google Scholar 

  26. Hou, B., Wang, D., Wang, Y., et al.: Adaptive weighted signal preprocessing technique for machine health monitoring. IEEE Trans. Instrum. Meas. 70, 1–11 (2021)

    Google Scholar 

  27. Randall, R.B.: A new method of modeling gear faults. J. Mech. Des. 104(2), 259–267 (1982)

    Google Scholar 

  28. Lee, J., Qiu, H., Yu, G. et al.: Rexnord technical services: Bearing data set, Moffett Field, CA: IMS, Univ. Cincinnati. NASA Ames Prognostics Data Repository, NASA Ames (2007)

  29. He, W., Miao, Q., Azarian, M., et al.: Health monitoring of cooling fan bearings based on wavelet filter. Mech. Syst. Signal Process. 64–65, 149–161 (2015)

    Article  Google Scholar 

  30. Soualhi, A., Medjaher, K., Zerhouni, N.: Bearing health monitoring based on hilbert–huang transform, support vector machine, and regression. IEEE Trans. Instrum. Meas. 64(1), 52–62 (2015)

    Article  Google Scholar 

  31. Khelif, R., Chebel-Morello, B., Malinowski, S., et al.: Direct remaining useful life estimation based on support vector regression. IEEE Trans. Industr. Electron. 64(3), 2276–2285 (2017)

    Article  Google Scholar 

  32. Wang, C., Jiang, W., Yang, X., et al.: RUL prediction of rolling bearings based on a DCAE and CNN. Appl. Sci. 11(23), 11516 (2021)

    Article  Google Scholar 

Download references

Acknowledgements

This research is supported by National Natural Science Foundation of China (Grant Numbers: 52250410345, 12172290).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yongbo Li.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Noman, K., Hou, B., Wang, D. et al. Weighted squared envelope diversity entropy as a nonlinear dynamic prognostic measure of rolling element bearing. Nonlinear Dyn 111, 6605–6620 (2023). https://doi.org/10.1007/s11071-022-08157-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11071-022-08157-0

Keywords

Navigation