Abstract
There exists a kind of complex periodic motion caused by the short-period error such as the pitch deviation, tooth surface crack, and so on, in the gear transmission system. It affects the transmission stationary of the system. This complex periodic motion is defined as the neighboring periodic motion in this paper. Its identification methods are proposed by using the multi-time scale Poincaré mapping sections. The nonlinear dynamics model of spur gear pair considering pitch deviation under multi-state meshing is introduced. The neighboring periodic motion of the system under different parameters is analyzed according to the proposed identification methods. The multi-stable motion of the spur gear pair with short-period error is explored by analysis methods of nonlinear dynamics. Results show that the short-period error leads to the nonstationary transmission of spur gear pair. The periodic motion of the system shows a long-period motion in the micro-time scale due to the effect of the short-period error. The actual periodic number of the system motion is the number of mapping points obtained in the macro-time scale. The number of mapping points in micro-time scale illustrates point clusters. The number of phase trajectory in micro-time scale displays lines clusters. The short-period error affects the range of parameters for multi-stable motion in spur gear pair. These identification and analysis methods provide a theoretical basis for investigation of the neighboring periodic motion in nonlinear systems.
Similar content being viewed by others
Data availability statement
The datasets generated during the current study are available from the corresponding author on reasonable request.
References
Kahraman, A., Singh, R.: Non-linear dynamics of a spur gear pair. J. Sound Vib. 142(1), 49–75 (1990)
Wang, J.J., Li, R.F., Peng, X.H.: Survey of nonlinear vibration of gear transmission systems. Appl. Mech. Rev. 56(3), 309–329 (2003)
Ma, H., Zeng, J., Feng, R.J., et al.: Review on dynamics of cracked gear systems. Eng. Fail. Anal. 55, 224–245 (2015)
Gao, Q., Tanabe, M., Nishihara, K.: Contact-impact analysis of geared rotor systems. J. Sound Vib. 319, 463–475 (2009)
Zhou, C.J., Chen, S.Y.: Modeling and calculation of impact friction caused by corner contact in gear transmission. Chin. J. Mech. Eng. 27(5), 958–964 (2014)
Yu, W.N., Mechefske, C.K.: Analytical modeling of spur gear corner contact effects. Mech. Mach. Theory 96, 146–164 (2016)
Liu, P.F., Zhu, L.Y., Gou, X.F., et al.: Modeling and analyzing of nonlinear dynamics for spur gear pair with pitch deviation under multi-state meshing. Mech. Mach. Theory 163, 104378 (2021)
Xiang, L., Jia, Y., Hu, A.J.: Bifurcation and chaos analysis for multi-freedom gear-bearing system with time-varying stiffness. Appl. Math. Model. 40(23–24), 10506–10520 (2016)
Yi, Y., Huang, K., Xiong, Y.S., et al.: Nonlinear dynamic modelling and analysis for a spur gear system with time-varying pressure angle and gear backlash. Mech. Syst. Signal Process. 132, 18–34 (2019)
Wang, J.T., Lim, C.M., Li, F.: Dynamics of a hypoid gear pair considering the effects of time-varying mesh parameters and backlash nonlinearity. J. Sound Vib. 308(1–2), 302–329 (2007)
Moradi, H., Salarieh, H.: Analysis of nonlinear oscillations in spur gear pairs with approximated modelling of backlash nonlinearity. Mech. Mach. Theory 51, 14–31 (2012)
Shi, J.F., Gou, X.F., Zhu, L.Y.: Modeling and analysis of a spur gear pair considering multi-state mesh with time-varying parameters and backlash. Mech. Mach. Theory 134, 582–603 (2019)
Pedrero, J.I., Pleguezuelos, M., Artés, M., et al.: Load distribution model along the line of contact for involute external gears. Mech. Mach. Theory 45, 780–794 (2010)
Chen, Z.G., Shao, Y.M.: Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack. Mech. Mach. Theory 62, 63–67 (2013)
Chen, Z.G., Zhou, Z.W., Zhai, W.M., et al.: Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations. Mech. Mach. Theory 149, 103838 (2020)
Xie, C.Y., Hua, L., Lan, J., et al.: Improved analytical models for mesh stiffness and load sharing ratio of spur gears considering structure coupling effect. Mech. Syst. Signal Process. 111, 331–347 (2018)
Chen, Z.G., Ning, J.Y., Wang, K.Y., et al.: An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth. Nonlinear Dyn. 106, 339–357 (2021)
Park, C.I.L.: Dynamic behavior of the spur gear system with time varying stiffness by gear positions in the backlash. J. Mech. Sci. Technol. 34, 565–572 (2020)
Xia, Y., Wan, Y., Liu, Z.Q.: Bifurcation and chaos analysis for a spur gear pair system with friction. J. Braz. Soc. Mech. Sci. Eng. 40(11), 529 (2018)
Chang-Jian, C.W., Chang, S.M.: Bifurcation and chaos analysis of spur gear pair with and without nonlinear suspension. Nonlinear Anal. Real World Appl. 12(2), 979–989 (2011)
Wang, X., Xiao, Z., Wu, X., et al.: Bifurcation and chaos characteristics of a single-stage spur gear pair system. J. Vib. Eng. Technol. 5(5), 417–422 (2017)
Farshidianfar, A., Saghafi, A.: Global bifurcation and chaos analysis in nonlinear vibration of spur gear systems. Nonlinear Dyn. 75, 783–806 (2014)
Farshidianfar, A., Saghafi, A.: Bifurcation and chaos prediction in nonlinear gear systems. Shock Vib 2014, 809739 (2014)
Al-shyyab, A., Kahraman, A.: Non-linear dynamic analysis of a multi-mesh gear train using multi-term harmonic balance method: period-one motions. J. Sound Vib. 284, 151–172 (2005)
Wang, J.G., Zhang, J., Yao, Z.Y., et al.: Nonlinear characteristics of a multi-degree-of-freedom spur gear system with bending-torsional coupling vibration. Mech. Syst. Signal Process. 121, 810–827 (2019)
Zhou, S.H., Song, G.Q., Sun, M.N., et al.: Nonlinear dynamic response analysis on gear-rotor-bearing transmission system. J. Vib. Control 24(9), 1632–1651 (2018)
Bonori, G., Pellicano, F.: Non-smooth dynamics of spur gears with manufacturing errors. J. Sound Vib. 306, 271–283 (2007)
Geng, Z.B., Xiao, K., Li, J.Y., et al.: Bifurcation and chaos of a spur gear transmission system with non-uniform wear. J. Vib. Acoust. Trans. ASME 143(3), 031004 (2021)
Xiang, L., An, C.H., Zhang, Y., et al.: Failure dynamic modelling and analysis of planetary gearbox considering gear tooth spalling. Eng. Failure Anal. 125, 105444 (2021)
Shi, J.F., Gou, X.F., Zhu, L.Y.: Bifurcation of multi-stable behaviors in a two-parameter plane for a non-smooth nonlinear system with time-varying parameters. Nonlinear Dyn. 100, 3347–3365 (2020)
Souza, D., Caldas, I.: Basins of attraction and transient chaos in a gear-rattling model. J. Vib. Control 7(6), 849–862 (2001)
de Souza, S.L.T., Caldas, I.L., Viana, R.L., et al.: Sudden changes in chaotic attractors and transient basins in a model for rattling in gearboxes. Chaos Solitons Fractals 21(3), 763–772 (2004)
Zhu, L.Y., Li, Z.F., Gou, X.F., et al.: Evolutionary mechanism of safety performance for spur gear pair based on meshing safety domain. Nonlinear Dyn. 104, 215–239 (2021)
Zhu, L.Y., Li, Z.F., Gou, X.F., et al.: Analysis of safety characteristics by nonlinear dynamics and safety basin methods for the spur gear pair in the established teeth contact safety domain. Mech. Syst. Signal Process. 158, 107718 (2021)
Mason, J.F., Piiroinen, P.T.: The effect of codimension-two bifurcations on the global dynamics of a gear model. SIAM J. Appl. Dyn. Syst. 8, 1694–1711 (2009)
Mason, J.F., Piiroinen, P.T., Wilson, R.E., et al.: Basins of attraction in nonsmooth models of gear rattle. Int. J. Bifurc. Chaos 19(1), 203–224 (2009)
Acknowledgements
This investigation is financially supported by the Natural Science Foundation of Tianjin, China (Grant No. 18JCYBJC88800), by the National Natural Science Foundation of China (Grant No. 51365025), by the Program for Innovative Research Team in University of Tianjin, China (Grant No. TD13-5037) and by the Tianjin Research Innovation Project for Postgraduate Students, China (Grant No. 2020 YJSB067).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Liu, P., Zhu, L., Gou, X. et al. Neighboring periodic motion in spur gear pair and its identification methods. Nonlinear Dyn 106, 2991–3023 (2021). https://doi.org/10.1007/s11071-021-06937-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11071-021-06937-8