The structure and properties of powder composites with an aluminum matrix reinforced with carbon materials of two types, i.e., nanotubes (CNT) and nanofibers (CNF), in an amount of 0.5 – 1.5 wt.% are studied. Composite microstructure is analyzed using optical and scanning electron microscopy. It is shown that hardness, compressive strength, and wear resistance of the nanocomposites increase with weight CNT and CNF fraction due to grain refinement and uniform nanoparticle distribution within the matrix. Reinforcement with CNT is more effective.
Similar content being viewed by others
References
H. T. Liu, L. W. Yang, and S. Han, “Research progress on micro- mechanical property of continuous fiber-reinforced ceramic matrix composites,” J. Inorg. Mater., 33(7), 711 – 720 (2018).
H. Fernandez, S. Ordonez, H. Pesenti, et al., “Microstructure homogeneity of milled aluminum A356–Si3N4 metal matrix composite powders,” J. Mater. Res. Technol., 8(3), 2969 – 2977 (2019).
X. Y. Pei,W. Han, G. Ding, et al., “Temperature effects on structural integrity of fiber-reinforced polymer matrix composites: A review,” J. Appl. Polym. Sci., 136(45), Art. No. 48206 (2019).
G. B. V. Kumar, P. P. Panigrahy, N. Suresh, et al., “Assessment of mechanical and tribological characteristics of silicon nitride reinforced aluminum metal matrix composites,” Compos. Part B-Eng., 175, Art. No. Unsp 107138 (2019).
N. M. Chelliah, P. Pambannan, and M. K. Surappa, “Effects of processing conditions on solidification characteristics and mechanical properties of in situ magnesium metal matrix composites derived from polysilazane precursor,” J. Compos. Mater., 53(26–27), 3741 – 3755 (2019).
H. Zhou, P. Yao, T. Gong, et al., “Effects of ZrO2 crystal structure on the tribological properties of copper metal matrix composites,” Tribol. Int., 138, 380 – 391 (2019).
A. Agrawal and R. Mirzaeifar, “Graphene-nickel interaction in layered metal-matrix composites,” Surf. Sci., 688, 1 – 6 (2019).
G. Korznikova, K. S. Nazarov, R. Khisamov, et al., “Intermetallic growth kinetics and microstructure evolution in Al–Cu–Al metal-matrix composite processed by high pressure torsion,” Mater. Lett., 253, 412 – 415 (2019).
S. V. Sujith and R. S. Mulik, “Thermal history analysis and structure-property validation of friction stir welded Al-7079– TiC in-situ metal matrix composites,” J. Alloy Compd., 812, Art. No. Unsp 152131 (2020).
S. Marimuthu, L. Dunleavey, Y. Liu, et al., “Water-jet guided laser drilling of SiC reinforced aluminium metal matrix composites,” J. Compos. Mater., 53(26–27), 3787 – 3796 (2019).
M. Ravikumar, H. N. Reddappa, and R. Suresh, “Study on mechanical and tribological characterization of Al 2O3SiCp reinforced aluminum metal matrix composite,” Silicon, 10(6), 2535 – 2545 (2018).
B. Munisamy, V. R. B. Madhavan, E. Chinnadurai, and J. Janardhanan, “Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide,” Mater. Test., 61(6), 537 – 542 (2019).
R. Raj and D. G. Thakur, “Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites,” P. I. Mech. Eng. C-J. Mec., 233(4), 1345 – 1356 (2019).
C. A. I. Merino, J. E. L. Sillas, J. M. Meza, and J. M. H. Ramirez, “Metal matrix composites reinforced with carbon nanotubes by an alternative technique,” J. Alloy Compd., 707, 257 – 263 (2017).
J. H. Jang and K. S. Han, “Fabrication of graphite nanofibers reinforced metal matrix composites by powder metallurgy and their mechanical and physical characteristics,” J. Compos. Mater., 41(12), 1431 – 1443 (2007).
S. Yin, Z. Zhang, E. J. Ekoi, et al., “Novel cold spray for fabricating graphene-reinforced metal matrix composites,” Mater. Lett., 196, 172 – 175 (2017).
M. Megahed, M. A. Attia, M. Abdelhameed, and A. G. El-Shafei, “Tribological characterization of hybrid metal matrix composites processed by powder metallurgy,” Acta Metall. Sin-Engl., 30(8), 781 – 790 (2017).
Yu. A. Sokolov, N. V. Pavlushin, and S. Yu. Kondrat’ev, “New additive technologies based on ion beams,” Russ. Eng. Res., 36(12), 1012 – 1016 (2016).
A. I. Rudskoy, S. Yu. Kondrat’ev, and Yu. A. Sokolov, “New approach to synthesis of powder and composite materials by electron beam. Part 1. Technological features of the process,” Met. Sci. Heat Treat., 58(1–2), 27 – 32 (2016).
R. Acuna, C. M. Abreu, M. J. Cristobal, et al., “Electrochemical study of the surface metal matrix composite developed on AA2024-T351 by the friction stir process,” Corros. Eng. Sci. Techn., 54(8), 715 – 725 (2019).
Y. L. Cheng, Z. H. Chen, H. L. Wu, and H. M. Wang, “The corrosion behaviour of the aluminum alloy 7075SiCp metal matrix composite prepared by spray deposition,” Mater. Corros., 58(4), 280 – 284 (2007).
R. Casati and M. Vedani, “Metal matrix composites reinforced by nano-particles – A review,” Metals, 4(1), 65 – 83 (2014).
Q. Lu, G. Keskar, R. Ciocan, et al., “Determination of carbon nanotube density by gradient sedimentation,” J. Phys. Chem. B, 110(48), 24371 – 24376 (2006).
L. Guadagno, M. Raimondo, V. Vittoria, et al., “The role of carbon nanofiber defects on the electrical and mechanical properties of CNF-based resins,” Nanotechnology, 24(30), Art. No. 305704 (2013).
K. Bandil, H. Vashisth, S. Kumar, et al., “Microstructural, mechanical and corrosion behaviour of Al–Si alloy reinforced with SiC metal matrix composite,” J. Compos. Mater., 53(28–30), 4215 – 4223 (2019).
P. K. Prajapati and D. Chaira, “Fabrication and characterization of Cu–B4C metal matrix composite by powder metallurgy: Effect of B4C on microstructure, mechanical properties and electrical conductivity,” T. Indian I. Metals, 72(3), 673 – 684 (2019).
M. F. Zawrah, I. M. Hassab-Allah, M. H. Ata, and H. Shouib, “Effect of Si, Al2O3, and aluminum dross on sinterability and properties of Ni-Ti metal matrix composites prepared by powder metallurgy,” Mater. Res. Express, 6(9), Art. No. 096588 (2019).
K. J. Joshua, S. J. Vijay, and D. P. Selvaraj, “Effect of nano TiO2 particles on microhardness and microstructural behavior of AA7068 metal matrix composites,” Ceram. Int., 44(17), 20774 – 20781 (2018).
N. Radhika, S. Thirumalini, and A. Shivashankar, “Investigation on mechanical and adhesive wear behavior of centrifugally cast functionally graded copper SiC metal matrix composite,” T. Indian I. Metals, 71(6), 1310 – 1321 (2018).
M. K. Singh and R. K. Gautam, “Structural, mechanical, and electrical behavior of ceramic-reinforced copper metal matrix hybrid composites,” J. Mater. Eng. Perform., 28(2), 886 – 899 (2019).
F. Kelen, M. Gavgali, and T. Aydogmus, “Microstructure and mechanical properties of a novel TiNi particulate reinforced AZ91 metal matrix composite,” Mater. Lett., 233, 12 – 15 (2018).
L. Reinert, I. Green, S. Gimmler, et al., “Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites,” Wear, 408, 72 – 85 (2018).
Y. D. Sui, L. N. Han, Y. H. Jiang, et al., “Effects of Ni60WC25 powder content on the microstructure and wear properties of WCp reinforced surface metal matrix composites,” T. Indian I. Metals, 71(10), 2415 – 2422 (2018).
G. B. V. Kumar, P. P. Panigrahy, N. Suresh, et al., “Assessment of mechanical and tribological characteristics of silicon nitride reinforced aluminum metal matrix composites,” Compos. Part B-Eng., 175, Art. No. Unsp. 107138 (2019).
R. Raj and D. G. Thakur, “Influence of boron carbide content on the microstructure, tensile strength and fracture behavior of boron carbide reinforced aluminum metal matrix composites,” Materialwiss. Werkst., 49(9), 1068 – 1080 (2018).
A. S. Smirnov, V. P. Shveikin, E. O. Smirnova, et al., “Effect of silicon carbide particles on the mechanical and plastic properties of the AlMg6/10% SiC metal matrix composite,” J. Compos. Mater., 52(24), 3351 – 3363 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 23 – 29, March, 2022.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Roy, U.K., Mondal, S. Microstructure and Properties of Powder Composites with Aluminum Matrix Reinforced with Carbon Nanomaterials. Met Sci Heat Treat 64, 156–162 (2022). https://doi.org/10.1007/s11041-022-00777-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-022-00777-y