On the basis of metallographic monitoring of semimanufactured steel pieces and automobile parts, it is shown that prediction of the properties of articles on the basis of the criterion of microhardness of individual structural constituents and the difference in the values of the criterion represents an effective approach.
Similar content being viewed by others
References
G. A. Navrotskii (ed.), Forging and Stamping. Reference Text, Vol. 3, Cold Die Forging [in Russian], Mashinostroenie, Moscow (1987), 384 p.
GOST 10702–78, Rolled Product from High-Quality Structural Carbon and Alloyed Steel for Cold Extrusion and Heading [in Russian], Izd-vo Standartov, Moscow (1993), 16 p.
S. I. Il’in and Yu. D. Koryagin, Technology of Heat Treatment of Steels: Textbook [in Russian], Izd. Tsentr Yuzhno-Ural. Gos. Univ., Chelyabinsk (2006), 120 p.
A. M. Vul’f, Cutting of Metals [in Russian], Mashinostroenie, Moscow (1973), 496 p.
E. I. Fel’dshtein, Machinability of Steels under Heat Treatment Conditions [in Russian], Mashgiz, Moscow (1953), 254 p.
N. K. Lavrov, Curling and Crushing of Chips in the Course of Cutting [in Russian], Mashinostroenie, Moscow (1971), 88 p.
G. Shapur and T. Shteferle (eds.), Handbook on the Technology of Cutting of Metals [in Russian], Mashinostroenie, Moscow (1971).
S. D. Kugul’ytdinov, A. K. Koval’chuk, and I. I. Portnov, Machining of Metals Used in Rocket Manufacture, Textbook [in Russian], Izd-vo MGTU im. N. E. Baumana, Moscow (2008), 194 p.
V. I. Astashchenko and V. G. Shibakov, Technological Methods for Management of Structural Formation of Steel in the Production of Machine Parts [in Russian], Academia, Moscow (2006), 328 p.
OST 37.001.056–74, Methods of Determining the Thickness of a Case-Hardened Layer of Parts [in Russian], Izd-vo Minavtoprom, Moscow (1974), 11 p.
V. M. Zinchenko, Engineering of the Surface of Gear Wheels by Methods of Chemical Heat Treatment [in Russian], Izd-vo MGTU im. N. E. Baumana, Moscow (2001), 303 p.
V. I. Astashchenko, R. R. Kalimullin, and R. Sh. Sadriev, “Properties of the surface of parts following chemical heat treatment,” Tekhnol. Metallov, No. 8, 36 – 40 (2011).
V. D. Kal’ner, ed., Quality Control of Heat Treatment of Semimanufactured Articles and Parts, Handbook [in Russian], Mashinostroenie, Moscow (1984), 384 p.
I. S. Kozlovskii, Chemical Heat Treatment of Gear Wheels [in Russian], Mashinostroenie, Moscow (1970), 232 p.
V. S. Sagaradze, Efforts to Increase the Reliability of Case-Hardened Parts [in Russian], Mashinostroenie, Moscow (1975), 216 p.
V. I. Astashchenko, et al., “RF Patent 2532874, IPC C21D 9/32, C21D 1/26, A method of heat treatment of steel billets, No. 2012147986,” Izobr., Polez. Modeli, No. 31 (2014), claim Nov. 12, 2012, published Nov. 10, 2014.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 57 – 61, May, 2016.
Rights and permissions
About this article
Cite this article
Astashchenko, V.I., Shveev, A.I. & Shveeva, T.V. Diagnostics of the Properties of Steel Articles According to the Criterion of Microhardness. Met Sci Heat Treat 58, 303–307 (2016). https://doi.org/10.1007/s11041-016-0008-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-016-0008-6