A domestically produced device for determining the cooling capacity of quenchants is developed on the basis of the ISO 9001, ISO 9950, ASTM D6200-01, and ASTM D6482-01 standards. Acomparison of the results of a determination of the parameters of cooling environments obtained by means of the present device and a foreign counterpart is carried out.
Similar content being viewed by others
References
International Standard ISO 9950. Industrial Quenching Oils. Determination of Cooling Characteristics. Nickel-Alloy Probe Test Method (1995), p. 9.
ASTM D6200-01. Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis (2001), p. 6.
ASTM D6482-01. Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) (2001), p. 8.
V. Lyuty, Quenchants: Handbook [in Russian], Metallurgiya, Chelyabinsk (1990), 190 p.
L. V. Petrash, Quenchants [in Russian], State Scientific and Technical Press of the Machine-Building Industry, Moscow (1959), 113 pp.
V. I. Aleshin, N. A. Dolotova, and V. S. Anisimov, “A model investigation of cooling of an insulated metallic sphere in aqueous media (quenching),” Zh. Tekh. Fiz., 71(12), 71 – 78 (2001).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 25 – 29, May, 2014.
Rights and permissions
About this article
Cite this article
Tsaplin, S.V., Bolychev, S.A., Shemanaev, D.V. et al. Data Processing and Measuring System for Studying the Cooling Capacity of Quenchants. Met Sci Heat Treat 56, 253–257 (2014). https://doi.org/10.1007/s11041-014-9741-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-014-9741-x