Abstract
The authors investigate the main variation regularities for the surface layer characteristics of high-resistant nickel-based alloy ÉK79-ID in strain hardening. A rational range of the degree of strain hardening (with respect to fatigue resistance) is identified for the considered alloy surface depending on service temperature.
Similar content being viewed by others
References
A. M. Sulima and M. I. Evstegneev, The Surface Layer Quality and Fatigue Strength in Parts Made of High-Resistant and Titanium Alloys [in Russian], Mashinostroenie, Moscow (1974).
M. S. Polyak, Hardening Technology. Technological Methods for Hardening [in Russian], Mashinostroenie, Moscow (1995).
M. M. Saverin, Shot-Blasting Strain Hardening [in Russian], Mashinostroenie, Moscow (1955).
I. G. Grinchenko, Hardening Parts Made of High-Resistant and Titanium Alloys [in Russian], Mashinostroenie, Moscow (1971).
V. T. Troshchenko, A. Ya. Krasovskii, V. V. Pokrovskii, et al., Resistance of Materials to Deformation and Fracture. Reference Book [in Russian], Part 2, Naukova Dumka, Kiev (1994).
V. A. Boguslaev, V. K. Yatsenko, D. V. Pavlenko, and M. R. Orlov, “Endurance of alloy ÉK79-ID at working temperatures,” Vestn. Dvigatelestr., No. 1, 37–41 (2002).
D. V. Pavlenko, M. R. Orlov, N. I. Babenko, and N. A. Savchuk, “Specifics of deformation and hardening of alloy ÉK79-ID under compression,” Vestn. Dvigatelestr., No. 4, 58–60 (2004).
Ya. D. Vishnyakov, Contemporary Methods for Studying Structure of Deformed Crystals [in Russian], Metallurgiya, Moscow (1975).
S. I. Bulychev and V. P. Alekhin, Testing Materials by Continuous Pressing of an Indenter [in Russian], Mashinostroenie, Moscow (1990).
D. V. Pavlenko, E. V. Kondratyuk, and A. Ya. Movshovich, “Formation of characteristics of the surface layer in parts made of alloy ÉK79-ID with strain hardening,” Vestn. Dvigatelestr., No. 1, 132–138 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 1, pp. 10–16, January, 2008.
Rights and permissions
About this article
Cite this article
Boguslaev, V.A., Pavlenko, D.V. Strain hardening and fatigue resistance of high-resistant alloy ÉK79-ID. Met Sci Heat Treat 50, 7–12 (2008). https://doi.org/10.1007/s11041-008-9001-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-008-9001-z