Abstract
Low cycle fatigue tests were conducted on the single crystal nickel-based superalloy, DD6, with different crystallographic orientations (i.e., [001], [011], and [111]) and strain dwell types (i.e., tensile, compressive, and balanced types) at a certain high temperature. Given the material anisotropy and mean stress, both orientation factor and stress range were introduced to the Smith,Watson, and Topper (SWT) stress model to predict the fatigue life. Experimental results indicated that the fatigue properties of DD6 depend on both crystallographic orientation and loading types. The fatigue life of the tensile, compressive, and balanced strain dwell tests are shorter than those of continuous cycling tests without strain dwell because of the important creep effect. The predicted results of the proposed modified SWT stress method agree well with the experimental data.
Similar content being viewed by others
References
Li S, Smith D J. High temperature fatigue-creep behaviour of single crystal SRR99 nickel base superalloys: Part 1—Cyclic mechanical response. Fatigue & Fracture of Engineering Materials & Structure, 1995, 18(5): 617–629
Versnyder F L, Shank M E. Development of columnar grain and single crystal high temperature materials through directional solidification. Materials Science and Engineering, 1970, 6(4): 213–247
Ma X, Shi H, Gu J, et al. Temperature effect on low-cycle fatigue behavior of nickel-based single crystalline superalloy. Acta Mechanica Solida Sinica, 2008, 21(4): 289–297
Li S, Smith D J. Development of anisotropic constitutive model for single-crystal superalloy for combined fatigue and creep loading. International Journal of Mechanical Sciences, 1998, 40(10): 937–948
Yue Z, Yang Z, Lu Z. Life prediction model for a nickel-base single crystal superalloy DD3. Chinese Journal of Aeronautics, 2002, 15 (4): 239–243
Li S, Ellison E G, Smith D J. The influence of orientation on the elastic and low cycle fatigue properties of several single crystal nickel base superalloys. The Journal of Strain Analysis for Engineering Design, 1994, 29(2): 147–153
Yu H, Li Y, Zhang S, et al. LCF behavior and life evaluation of a single crystal nickel base superalloy under different dwell conditions. In: Proceedings of 28th International Congress of the Aeronautical Sciences. 2012, 1–8
Dong C, Yu H, Li Y, et al. Life modeling of anisotropic fatigue behavior of a single crystal nickel-base superalloy. International Journal of Fatigue, 2014, 61: 21–27
Li S, Smith D J. High temperature fatigue-creep behaviour of single crystal SRR99 nickel base superalloys: Part 2—Fatigue-creep life behaviour. Fatigue & Fracture of Engineering Materials & Structure, 1995, 18(5): 631–643
Smith K N, Watson P, Topper T H. A stress-strain function for the fatigue of metals. Journal of Materials, 1970, 5: 767–778
Ince A, Glinka G. A modification of Morrow and Smith-Watson-Topper mean stress correction models. Fatigue & Fracture of Engineering Materials & Structure, 2011, 34(11): 854–867
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Z., Yu, H. & Dong, C. LCF behavior and life prediction method of a single crystal nickel-based superalloy at high temperature. Front. Mech. Eng. 10, 418–423 (2015). https://doi.org/10.1007/s11465-015-0362-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-015-0362-x