Abstract
The basic experimentally determined laws of the appearance of dendritic segregation and formation of grain structure in an ingot, the mechanism of homogenizing annealing that promotes dissolution of inclusions of nonequilibrium phases, various approaches to computing homogenization regimes, the conditions for choosing the homogenization temperature and reasons for using stage homogenization are briefly considered.
Similar content being viewed by others
References
B. A. Kolachev, R. M. Gabidullin, and Yu. V. Piguzov, Technology of Heat Treatment of Nonferrous Metals and Alloys [in Russian], Metallurgiya, Moscow (1980).
R. K. Gupta, N. Nayan, and B. R. Ghosh, “Computation of homogenization regime for aluminum alloy AA2219 on the basis of diffusion theory,” Metalloved. Term. Obrab. Met., No. 11, 41–44 (2005).
V. I. Dobatkin, “Regular features of structure formation in rapid crystallization of alloys,” in: Selected Works of V. I. Dobatkin [in Russian], VILS, Moscow (2001), pp. 503–529.
V. S. Zolotarevskii and V. V. Teleshov, “Determination of the optimum duration of heating for hardening from the structure of castings from aluminum alloys,” Metalloved. Term. Obrab. Met., No. 7, 44–49 (1970).
V. V. Teleshov and V. S. Zolotarevskii, “Interrelation between some structural characteristics of cast alloys,” Izv. Vuzov, Tsvetn. Met., No. 4, 120–123 (1971).
V. S. Zolotarevskii, V. V. Teleshov, Yu. P. Adler, and E. V. Kuk, “Choice of the optimum time of homogenization on the basis of structural characteristics of cast alloy,” Izv. Vuzov, Tsvetn. Met., No. 6, 116–120 (1966).
I. N. Novikov and V. S. Zolotarevskii, Dendritic Segregation in Alloys [in Russian], Nauka, Moscow (1966).
V. V. Teleshov and V. S. Zolotarevskii, “Computation of the time of dissolution of nonequilibrium phases in homogenization of binary alloys,” Izv. Vuzov, Tsvetn. Met., No. 5, 136–141 (1967).
V. S. Zolotarevskii, A. P. Naumkin, and V. V. Teleshov, “About the kinetics of dissolution of flat inclusions of excess structural component in diffusion annealing of a cast binary alloy,” Izv. Vuzov, Tsvetn. Met., No. 1, 109–111 (1974).
V. S. Zolotarevskii and I. I. Novikov, “Optimum time of homogenization of aluminum alloys,” Tekhnol. Legk. Splavov, No. 5, 9–12 (1970).
V. V. Teleshov, “About determination of the optimum time of homogenization of aluminum alloys using the characteristics of cast structure,” Tekhnol. Legk. Splavov, No. 5, 9–12 (1971).
A. I. Belyaev, O. S. Bochvar, N. N. Buynov, et al., The Physical Metallurgy of Aluminum and Its Alloys, A Reference Book [in Russian], Metallurgiya, Moscow (1983).
R. I. Barbanel’ and S. L. Tsukrov, “Heat treatment of semiproducts from aluminum alloys,” in: Aluminum Alloys. Fabrication of Semiproducts from Aluminum Alloys [in Russian], Metallurgiya, Moscow (1971), pp. 441–474.
N. A. Aristova and I. F. Kolobnev, Heat Treatment of Castable Aluminum Alloys [in Russian], Metallurgiya, Moscow (1977).
W. Hufnagel, Key to Aluminum Alloys, Aluminium-Verlag GmbH, Düsseldorf (1991).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 44–48, June, 2007.
Rights and permissions
About this article
Cite this article
Teleshov, V.V. About computation of homogenization regimes for aluminum alloys. Met Sci Heat Treat 49, 320–324 (2007). https://doi.org/10.1007/s11041-007-0059-9
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0059-9