Abstract
The structure and mechanical properties of NiAl-Wand NiAl-W-Mo composite materials (CM) obtained by sintering from powders are studied. Comparative analysis of the effect of hot compressive deformation of a compact material at 1000–1300°C on the integrity of the microspecimens and of the tungsten shells on NiAl granules in CM with cellular structure is performed. The thermokinetic stability of the grain structure of unalloyed nickel aluminide NiAl and of a NiAl-W composite material with cellular structure is investigated. The temperature of the beginning of recrystallization of the NiAl intermetallic is determined. A map of structural states is plotted in the “temperature-operating time” coordinates for CM with cellular structure. The local chemical composition of the “NiAl-refractory metal” phase boundary is studied in CM with cellular structure and without it. The effect of the structural state of CM on the yield strength in compressive tests at 1000°C is determined. The oxidation resistance at 1000–1300°C is studied and a treatment approaching the oxidation resistance of CM with cellular structure at 1000–1300°C to the level of high-temperature strength of unalloyed NiAl and of its alloy with 4 wt.% Hf is suggested.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. A. Shtremel’, V. V. Safonov, Yu. I. Ponomarev, et al., “A composite material (its variants) and a method of its fabrication, RF Patent No. 2135619, MKI6 C22 C30/00, 1/04, B22 F3/16,” Byul. Izobr. Polezn. Modeli, No. 24 (1999).
M. Yu. Belomytsev, A. I. Laptev, T. V. Kozenko, and O. V. Suchkova, “Strength of double-phase materials based on NiAl intermetallic,” Izv. Vuzov, Tsvetn. Met., No. 1, 50–55 (2006).
M. Yu. Belomytsev and I. P. Ezhov, “Fabrication of small specimens of intermetallic compositions, ” Izv. Vuzov, Chern. Met., No. 7, 50–52 (1999).
V. P. Elyutin, V. I. Kostikov, B. S. Lysov, et al., High-Temperature Materials, Part 2. Fabrication and Physicochemical Properties of High-Temperature Materials [in Russian], Metallurgiya, Moscow (1973).
M. Yu. Belomytsev, “High-temperature compressive tests of small specimens,” Izv. Vuzov, Chern. Met., No. 11, 42–44 (2000).
C. M. Barinov, Z. I. Kornilova, Yu. L. Krasulin, et al., “Oxidation susceptibility of some cast and sintered alloys based on TiAl, NiAl, and Ni3Al intermetallics,” Poroshk. Metall., No. 12, 61–65 (1987).
D. B. Miracle, “The physical and mechanical properties of NiAl,” Acta Metall. Mater., 41(3), 949–985 (1993).
P. Kofstad, High-Temperature Oxidation of Metals, New York (1966).
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 25–30, June, 2006.
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Belomytsev, M.Y., Kozlov, D.A. Stability of composite materials NiAl-refractory metal with cellular structure. Met Sci Heat Treat 48, 255–260 (2006). https://doi.org/10.1007/s11041-006-0080-4
Issue Date:
DOI: https://doi.org/10.1007/s11041-006-0080-4