A method of laser correction of the geometric errors of multi-axis programmed control equipment, such as machine tools and plate measuring engines, as well as a traditional standardized method of correction of geometric errors with respect to individual coordinate axes and a method of correction of the total three-dimensional error are considered. It is shown that the new method is effective, in that it enables a 10-fold or greater reduction in the geometric errors of these types of machines, including machines equipped with long-path coordinate axes (greater than 18 m). Optimal control of the distribution of errors assuring their minimal values in the maximal zone of the workspace is proposed.
Similar content being viewed by others
References
S. N. Grigoriev and V. I. Teleshevskii, “Measurement problems in technological shaping processes,” Izmer. Tekhn., No. 7, 3–7 (2011); Measur. Techn., 54, No. 7, 744–749 (2011).
L. A. Rybak, V. V. Yershukov, and A. V. Chichvarin, Effective Methods of Solving Problems of Kinematics and Dynamics of a Parallel-Structure Robot Machine Tool [in Russian], Fizmatgiz, Moscow (2011).
S. Satori and G. X. Zhang, “Geometric error measurement and compensation of machines,” Ann. CIRP, 44, No. 2, 599–609 (1995).
H. Schwenke et al., “Geometric error measurement and compensation of machines – an update,” Ann. CIRP. Manufacturing Technol., 57, 660–675 (2008).
H. Schenke, M. Franke, and J. Hannaford, “Error mapping of CMMs and machine tools by a single tracking interferometer,” Ann. CIRP, 54, No. 1, 475–478 (2005).
Renishaw Co., System for Testing Accuracy and Calibration of Machine Tools and Plate Measuring Engines, http://renishaw.com, accessed Jan. 15, 2012.
V. I. Teleshevskii and S. G. Grishin, “A heterodyne laser interferometer with digital phase conversion,” Izmer. Tekhn., No. 6, 13–18 (2006); Measur. Techn., 49, No. 6, 545–551 (2006).
D. V. Kosinskii, V. I. Teleshevskii, and V. A. Sokolov, “A heterodyne laser interferometric technique based on Fresnel diffraction,” Izmer. Tekhn., No. 8, 7–10 (2011); Measur. Techn., 54, No. 8, 859–864 (2011).
GOST 27843–2006, Tests of Machine Tools. Determination of Precision and Repeatability of Positioning of Axes with Numerical Programmed Control.
V. P. Koronkevich and V. A. Khanov, Laser Interferometers and Their Use [in Russian], Institute of Atomic Energy, USSR Academy of Sciences (Siberian Division) (1984).
P. A. McKeown and J. Loxham, “Some aspects of the design of high precision measuring machines,” Ann. CIRP, 22, No. 1, 139–140 (1973).
A. P. Rybalko and S. A. Rybalko, “Adaptive, diagnostic, and programmed capabilities of the FlexNC universal numerical programmed control system,” Avtomatiz. Prom., No. 5, 21–26 (2010).
A. P. Kuznetsov, Thermal Behavior and Precision of Metal-Cutting Machine Tools [in Russian], Yanus-K, Moscow (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 5, pp. 33–37, May, 2012.
Rights and permissions
About this article
Cite this article
Teleshevskii, V.I., Sokolov, V.A. Laser correction of geometric errors of multi-axis programmed-controlled systems. Meas Tech 55, 535–541 (2012). https://doi.org/10.1007/s11018-012-9995-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-012-9995-x