Technology is developed for preparing semifinished sheet of hypereutectic alloys based on the aluminumcerium system intended for operation under conditions of x-radiation. The technology is based on creating a test alloy by casting and subsequent deformation treatment. Two versions of cast billet preparation are considered in the work. Sheet material prepared by rolling these billets exhibits good adaptability and may be used for producing engineering objects.
Similar content being viewed by others
References
A. A. Rusakov and V. N. Yamtsev, Bases of Metal x-Radiography. Part 1, MIFI, Moscow (1994).
V. I. Elagin, V. M. Fedorov, K. K. Bilev, et al., Inventor’s Cert. 514905 USSR, IPC С22С21/00, “Alloy based on aluminum,” subm. 02.02.1974, publ. 05.25.1976.
V. I. Lobatkin, V. I. Elagin, V. M. Fedorov, et al., Inventor’s Cert. 548173, IPC С22С21/00, “Alloy based on aluminum,” subm. 08.28.1974, publ. 06.07.1992.
V. I. Elagin, V. M. Fedorov, M. G. Stepanova, et al., Inventor’s Cert. 451360 USSR, IPC С22С21/00, “Alloy based on aluminum,” subm. 01.011973, publ. 07.30.1993.
A. I. Mikhailichenko, E. B. Mekhlin, and Yu. B. Patrikeev, Rare Earth Metals, Metallurgiya, Moscow (1987).
E. M. Savitskii and V. F. Terekhova, Rare Earth Metal Alloys, Izd. Akad. Nauk SSSR, Moscow (1962).
G. P. Borisov and A. I. Semenchenko, “Role of pressure in forming high quality castings of aluminum alloys,” Lit. Proizvod., No. 5, 25–33 (2009).
Ya. S. Umanskii, x-Radiography, Mashgiz (1951).
A. A. Rusakov, x-Radiography of Metals, Atomizdat, Moscow (1977).
A. P. Petrov, D. V. Eremeev, N. V. Eremeev, and A. S. Steshin, “Aspects of technology for preparing circular semiproducts of aluminum alloys,” Tekhnol. Legk. Splavov, No. 3, 7–11 (2013).
F. M. Perel’man, Hafnium Metallurgy [Russian translation], Metallurgiya, Moscow (1967).
G. V. Samsonov, Boron, Its Compounds and Alloys, Izd. Akad. Nauk. UkrSSSR, Kiev (1960).
V. V. Skorokhod, “Phenomenological theory of compaction during porous body sintering,” Poroshk. Metall., No. 2, 14–20 (1961).
A. P. Petrov, V. I. Tararyshkin, and N. V. Eremeev, “Features of casting technology and deformation treatment of alloys of the Al–REM systems,” Tekhnol. Mashin., No. 9, 8–12 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 9, pp. 90–96, September, 2017.
Rights and permissions
About this article
Cite this article
Evseev, P.S., Eremeev, N.V., Petrov, A.P. et al. Production Features for Preparing Semifinished Sheet of Hypereutectic Alloys Based on the Aluminum–Cerium System. Metallurgist 61, 807–814 (2018). https://doi.org/10.1007/s11015-018-0568-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-018-0568-3