Skip to main content
SpringerLink
Log in

Developing and Studying Methods and Equipment for Rolling Collector Profiles Made of Alloy BrKd1

  • Published:
Metallurgist Aims and scope

The Russian and foreign technology used since the beginning of the last century to industrially produce collector profiles made of copper-cadmium bronze is characterized by low productivity, large losses of metal, and semifinished and finished products of inferior quality. The technology includes casting and pressing ingots obtain semifinished products of trapezoidal, square, or rectangular cross section, which are then rolled or drawn to obtain billets for subsequent final drawing. The pressing and rolling or drawing of the trapezoidal semifinished products is accompanied by bending of the ribs and twisting of the product, and the quality of the finished profiles is compromised by their curvature. The authors have developed new methods and equipment for rolling collector profiles in tapered rolls to avoid the formation of such defects. Results are reported from tests of the methods, which involve rolling in tapered rolls with intersecting axes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. P. I. Gradusov, “Survey of copper alloys with a cadmium addition,” Metallurg: Nauch.-Tekh. Zh., , No. 9 79–83 (1932).

  2. Brandstätter and G. Randolph, “Beitrag zür Oberfl ächenausbildung beim diskontinuierlichen Strangguss von CuCd draht bassen und ihr einfl ob beim warmwalzen,” Z. Metallkunde, 7, 565–570 (1969).

  3. V. V. Davydov, R. K. Mysik, Yu. P. Poruchikov, et al, “Effect of process factors in casting and rolling on the deformability of ingots of a copper-cadmium alloy,” Metal-Shaping: Inter-Institute Symposium, Izd. UPI (1987), No. 14, pp. 80–85.

  4. Yu. N. Loginov, R. K. Mysik, A. G. Titova, et al., Patent No. 2309499 RF, IPC7 HO1R43/06, “Profile for the collectors of electrical machinery,” No. 2006107045/09, subm. 03.06.2005, publ. 10.27.2007, Byull., No. 30.

  5. L. M. Zheleznyak, B. P. Guseletov, A. P. Potopaev, et al., “Hot rolling of a semifinished product for a collector profile on a continuous 250 mill,” Tsvetn. Met., No. 5, 74–77 (1982).

  6. Vasilevskii, L. M. Zheleznyak, M. Yu. Borodin, et al, “Production of profiles of electrical-grade copper alloys with superior service properties,” Metallurg, No 4, 103–108 (2013).

  7. Marks and Clerk, Patent No. 791401 UK, B 21 B, “A continuous rolling mill and improved hot rolling process for production of trapezoidal cross-section strip,” subm. 11.12.1958, publ. 03.05.1958.

  8. N. A. Kremsov, Author’s Certificate No. 995919 USSR, IPC3 B21B1/08, “Method of rolling wedge-shaped profiles,” No. 2536514/22-02, subm. 10.24.1977, publ. 02.15.1983, Byull., No. 6.

  9. N. A. Kremsov, Author’s Certificate No. 1616724 USSR, IPC5 B21B1/08, “Method of rolling wedge-shaped profiles,” No. 4489119/31-02, subm. 10.03.1988, publ. 12.30.1990, Byull., No. 48.

  10. N. A. Kremsov and A. A. Barkov, Author’s Certificate No. 1586805 USSR, IPC5 B21B13/10, “Stand for rolling wedge-shaped profiles,” No. 4488819/31-02, subm. 10.03.1988, publ. 08.23.1990, Byull., No. 31.

  11. V. N. Vydrin, N. A. Kremsov, et al., Author’s Certificate No. 839106 USSR, IPC3 B21B13/10, “Rolling mill for rolling wedge-shaped profiles,” No. 272359222-02, subm. 02.13.1979, publ. 10.23.1982, Byull., No. 39.

  12. N. A. Kremsov, L. A. Barkov, et al., Author’s Certificate No. 687670 USSR, IPC3, B21B13/10, “Rolling-mill stand with a multi-roll pass,” No. 2435181/22-02, subm. 12.28.1976, publ. 08.30.1982, Byull., No. 32.

  13. M. P. Katsnelson, “Three-roll stands with an adjustable roll gap,” Oborud. Prokatn. Proizv., No. 1-67-16, 17–26 (1967).

  14. H. Brauer, “Dreiwalzenblocke in walzstrassen für Feineisen und Draht,” Draht-Welt, 57, No. 12, 611–618 (1971).

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. South Ural State University, Chelyabinsk, Russia

    M. N. Samodurova, N. A. Kremsov, L. A. Barkov & Yu. S. Latfulina

Authors
  1. M. N. Samodurova
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. A. Kremsov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. L. A. Barkov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yu. S. Latfulina
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. N. Samodurova.

Additional information

Translated from Metallurg, No. 7, pp. 51–55, July, 2015.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Samodurova, M.N., Kremsov, N.A., Barkov, L.A. et al. Developing and Studying Methods and Equipment for Rolling Collector Profiles Made of Alloy BrKd1. Metallurgist 59, 613–618 (2015). https://doi.org/10.1007/s11015-015-0147-9

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11015-015-0147-9

Keywords

Search

Navigation