The EVRAZ ZSMK 250-1 continuous small-section mill specializes in manufacture of rebars Nos. 10 and 12 and equal-flanged angles Nos. 2–4 from billets 100 ×× 100 mm in cross section. Rebar manufacture is carried out by a slitting process from carbon and low-alloy steels for different standards governing rib transverse shape. The life of finishing stand reinforcing passes is mostly determined by channel shape at the bottom of grooves within which transverse ribs are formed. The lowest life of finishing stand passes is observed in rolling crescent shaped ribs. There is surface breakdown in these passes with formation of cracks and spalling. Cracks form during the first use of a set of rolls. Cracks penetrate to a depth up to 15 mm in rolls with high hardness. Tests are performed for different grades of cast iron for rolls of the finishing group with a minimum hardness of 60 HRC to a controlled depth of 15 mm from the roll body surface. The best operating properties are obtained in rolls of cast iron with a spheroidal graphite shape, alloyed with chromium, nickel, molybdenum, and vanadium.
Similar content being viewed by others
References
A. N. Drobyshev, Yu. N. Samsonov, E. M. Fedorenko, et al., “Assimilation of cast iron roll manufacturing technology,” Stal, No. 5, 66–67 (2004).
V. V. Salomykin, E. V. Saprykin, S. A. Kaligin, et al., “Comparative analysis of roll pass life during rebar rolling,” Stal, No. 1, 37–38 (2013).
V. V. Salomykin, E. V. Saprykin, E. M. Fedorenko, et al., “Study of SPKhN-60 cast iron roll wear resistance,” Stal, No. 8, 45–47 (2003).
V. V. Salomykin, E. V. Saprykin, M. N. Shchelkov, et al., “Effect of carbide forming elements on rolling roll operating properties,” Stal, No. 5, 63–64 (2005).
I. N. Tikhonov, “Evaluation of rebar efficiency with different forms of periodic surface profile,” Stroit. Mater., March, 1–6 (2013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 6, pp. 114–117, June, 2014.
Rights and permissions
About this article
Cite this article
V’yuntsov, Y.O., Koverzin, A.M., Romadin, A.Y. et al. Assimilation of Advanced Roll Materials in Rolling Production. Metallurgist 58, 524–527 (2014). https://doi.org/10.1007/s11015-014-9945-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-014-9945-8