Dimensional analysis is used to construct a new mathematical model that establishes a closer relationship between the unit productivity of a sintering machine and the parameters of the sintering operation. An analysis is performed to determine how the unit productivity of the sintering machine is affected by the total gasdynamic resistance of the bed, the coarseness of the material being sintered, the unit load complex, and the duration of the sintering operation.
Similar content being viewed by others
References
A. A. Panychev, D. R. Ganin, and A. P. Nikonova, Optimizing the Parameters of the Sintering Operation Based on Mathematical Models [in Russian], Alteks, Moscow (2011).
A. A. Panychev and A. P. Nikonova, “Optimizing process parameters based on mathematical models for the sintering of Mikhailovskii and Lebedinskii concentrates,” Metallurg, No. 10, 48–51 (2008).
S. V. Bazilevich and E. F. Vegman, Sintering [in Russian], Metallurgiya, Moscow (1967).
E. F. Vegman, Agglomerating Ores and Concentrates [in Russian], Metallurgiya, Moscow (1976).
V. P. Zhidkin and D. N. Dornin, Sinter Production: Technology, Equipment, Automation [in Russian], G. A. Shalaev (ed.), Uralskii Tsentr PR i Reklamy, Ekaterinburg (2004).
V. I. Korotich,Yu. A. Frolov, and G. N. Bezdezhskii, Sintering of Ore-Bearing Materials [in Russian], UGTU-UPI, Ekaterinburg (2003).
S. V. Bazilevich, A. G. Astakhov, G. M. Maizel, et al., Production of Sinter and Pellets: Handbook [in Russian], Metallurgiya, Moscow (1984).
S. G. Bratchikov, Yu. A. Berman, Ya. L. Belotserkovskii, et al., Heat Engineering of Iron-Ore Agglomeration [in Russian], Metallurgiya, Moscow (1970).
V. A. Shurkhal, External Heating During Sintering [in Russian], Naukova Dumka, Kiev (1985).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, No. 5, pp. 44–47, May, 2013.
Rights and permissions
About this article
Cite this article
Ganin, D.R., Panychev, A.A. New model of the sintering process. Metallurgist 57, 397–401 (2013). https://doi.org/10.1007/s11015-013-9744-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-013-9744-7