Abstract
The paper proposes a comparison between a three-dimensional (3D) exact solution and several two-dimensional (2D) numerical solutions. Numerical methods include classical 2D finite elements (FEs), and classical and refined 2D generalized differential quadrature (GDQ) solutions. The free vibration analysis of two different configurations of functionally graded material (FGM) plates and cylinders is proposed. The first configuration considers a one-layered FGM structure. The second one is a sandwich configuration with external classical skins and an internal FGM core. Low and high order frequencies are analyzed for thick and thin simply supported structures. Vibration modes are investigated to make a comparison between results obtained via the 2D numerical methods and those obtained by means of the 3D exact solution. The 3D exact solution is based on the differential equations of equilibrium written in general orthogonal curvilinear coordinates. This exact method is based on a layer-wise approach where the continuity of displacements and transverse shear/normal stresses is imposed at the interfaces between the layers of the structure. The 2D finite element results are obtained by means of a well-known commercial FE code. Classical and refined 2D GDQ models are based on a generalized unified approach which considers both equivalent single layer and layer-wise theories. The differences between 2D numerical solutions and 3D exact solutions depend on the considered mode, the order of frequency, the thickness ratio of the structure, the geometry, the embedded material and the lamination sequence.
Similar content being viewed by others
References
Birman V, Byrd LW (2007) Modeling and analysis of functionally graded materials and structures. Appl Mech Rev 60:195–216
Dong L, Atluri SN (2011) A simple procedure to develop efficient & stable hybrid/mixed elements, and Voronoi cell finite elements for macro- & micro-mechanics. CMC Comput Mater Contin 24:61–104
Bishay PL, Sladek J, Sladek V, Atluri SN (2012) Analysis of functionally graded magneto-electro-elastic composites using hybrid/mixed finite elements and node-wise material properties. CMC Comput Mater Contin 29:213–262
Bishay PL, Atluri SN (2012) High-performance 3D hybrid/mixed, and simple 3D Voronoi cell finite elements, for macro- & micro-mechanical modeling of solids, without using multi-field variational principles. CMES Comput Model Eng Sci 84:41–97
Brischetto S (2009) Classical and mixed advanced models for sandwich plates embedding functionally graded cores. J Mech Mater Struct 4:13–33
Carrera E, Brischetto S (2009) A survey with numerical assessment of classical and refined theories for the analysis of sandwich plates. Appl Mech Rev 62:1–17
Brischetto S, Leetsch R, Carrera E, Wallmersperger T, Kröplin B (2008) Thermo-mechanical bending of functionally graded plates. J Therm Stress 31:286–308
Mattei G, Tirella A, Ahluwalia A (2012) Functionally Graded Materials (FGMs) with predictable and controlled gradient profiles: computational modelling and realisation. CMES Comput Model Eng Sci 87:483–504
Thai HT, Kim SE (2015) A review of theories for the modeling and analysis of functionally graded plates and shells. Compos Struct 128:70–86
Swaminathan K, Naveenkumar DT, Zenkour AM, Carrera E (2015) Stress, vibration and buckling analyses of FGM plates—a state-of-the-art review. Compos Struct 120:10–31
Carrera E, Brischetto S, Robaldo A (2008) Variable kinematic model for the analysis of functionally graded material plates. AIAA J 46:194–203
Brischetto S, Carrera E (2010) Advanced mixed theories for bending analysis of functionally graded plates. Comput Struct 88:1474–1483
Brischetto S (2013) Exact elasticity solution for natural frequencies of functionally graded simply-supported structures. CMES Comput Model Eng Sci 95:391–430
Dong CY (2008) Three-dimensional free vibration analysis of functionally graded annular plates using the Chebyshev-Ritz method. Mater Des 29:1518–1525
Li Q, Iu VP, Kou KP (2008) Three-dimensional vibration analysis of functionally graded material sandwich plates. J Sound Vib 311:498–515
Malekzadeh P (2009) Three-dimensional free vibration analysis of thick functionally graded plates on elastic foundations. Compos Struct 89:367–373
Hosseini-Hashemi S, Salehipour H, Atashipour SR (2012) Exact three-dimensional free vibration analysis of thick homogeneous plates coated by a functionally graded layer. Acta Mech 223:2153–2166
Vel SS, Batra RC (2004) Three-dimensional exact solution for the vibration of functionally graded rectangular plates. J Sound Vib 272:703–730
Kashtalyan M (2004) Three-dimensional elasticity solution for bending of functionally graded rectangular plates. Eur J Mech A/Solids 23:853–864
Xu Y, Zhou D (2009) Three-dimensional elasticity solution of functionally graded rectangular plates with variable thickness. Compos Struct 91:56–65
Kashtalyan M, Menshykova M (2009) Three-dimensional elasticity solution for sandwich panels with a functionally graded core. Compos Struct 87:36–43
Zhong Z, Shang ET (2003) Three-dimensional exact analysis of a simply supported functionally gradient piezoelectric plate. Int J Solids Struct 40:5335–5352
Alibeigloo A, Kani AM, Pashaei MH (2012) Elasticity solution for the free vibration analysis of functionally graded cylindrical shell bonded to thin piezoelectric layers. Int J Press Vessels Pip 89:98–111
Zahedinejad P, Malekzadeh P, Farid M, Karami G (2010) A semi-analytical three-dimensional free vibration analysis of functionally graded curved panels. Int J Press Vessels Pip 87:470–480
Chen WQ, Bian ZG, Ding HJ (2004) Three-dimensional vibration analysis of fluid-filled orthotropic FGM cylindrical shells. Int J Mech Sci 46:159–171
Vel SS (2010) Exact elasticity solution for the vibration of functionally graded anisotropic cylindrical shells. Compos Struct 92:2712–2727
Sladek J, Sladek V, Krivacek J, Zhang C (2005) Meshless local Petrov-Galerkin method for stress and crack analysis in 3-D axisymmetric FGM bodies. CMES Comput Model Eng Sci 8:259–270
Sladek J, Sladek V, Tan CL, Atluri SN (2008) Analysis of transient heat conduction in 3D anisotropic functionally graded solids by the MLPG method. CMES Comput Model Eng Sci 32:161–174
Sladek J, Sladek V, Solek P (2009) Elastic analysis in 3D anisotropic functionally graded solids by the MLPG. CMES Comput Model Eng Sci 43:223–252
Tornabene F, Fantuzzi N, Ubertini F, Viola E Strong formulation finite element method based on differential quadrature: a survey. Appl Mech Rev 67:020801-1-55
Alibeigloo A, Nouri V (2010) Static analysis of functionally graded cylindrical shell with piezoelectric layers using differential quadrature method. Compos Struct 92:1775–1785
Akbari Alashti R, Khorsand M, Tarahhomi MH (2013) Thermo-elastic analysis of a functionally graded spherical shell with piezoelectric layers by differential quadrature method. Scientia Iranica 20:109–119
Asanjarani A, Satouri S, Alizadeh A, Kargarnovin MH (2015) Free vibration analysis of 2D-FGM truncated conical shell resting on Winkler-Pasternak foundations based on FSDT. Proc Inst Mech Eng Part C J Mech Eng Sci 229:818–839
Bahadori R, Najafizadeh MM (2015) Free vibration analysis of two-dimensional functionally graded axisymmetric cylindrical shell on Winkler-Pasternak elastic foundation by First-order Shear Deformation Theory and using Navier-differential quadrature solution methods. Appl Math Model 39:4877–4894
Jodaei A, Jalal M, Yas MH (2012) Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN. Compos Part B Eng 43:340–353
Hosseini-Hashemi Sh, Akhavan H, Taher H Rokni Damavandi, Daemi N, Alibeigloo A (2010) Differential quadrature analysis of functionally graded circular and annular sector plates on elastic foundation. Mater Design 31:1871–1880
Wu L, Wang H, Wang D (2007) Dynamic stability analysis of FGM plates by the moving least squares differential quadrature method. Compos Struct 77:383–394
Leissa AW (1969) Vibration of Plates, NASA SP-160, Washington
Leissa AW (1973) Vibration of Shells, NASA SP-288, Washington
Werner S (2004) Vibrations of shells and plates, 3rd edition: revised and expanded. CRC Press, Marcel Dekker Inc., New York
Brischetto S, Carrera E (2010) Importance of higher order modes and refined theories in free vibration analysis of composite plates. J Appl Mech 77:1–14
Tornabene F, Brischetto S, Fantuzzi N, Viola E (2015) Numerical and exact models for free vibration analysis of cylindrical and spherical shell panels. Compos Part B Eng 81:231–250
Brischetto S (2014) Three-dimensional exact free vibration analysis of spherical, cylindrical, and flat one-layered panels. Shock Vib 2014:1–29
Brischetto S (2014) An exact 3D solution for free vibrations of multilayered cross-ply composite and sandwich plates and shells. Int J Appl Mech 6:1–42
Brischetto S, Torre R (2014) Exact 3D solutions and finite element 2D models for free vibration analysis of plates and cylinders. Curved Layer Struct 1:59–92
Brischetto S (2014) A continuum elastic three-dimensional model for natural frequencies of single-walled carbon nanotubes. Compos Part B Eng 61:222–228
Brischetto S (2015) A continuum shell model including van der Waals interaction for free vibrations of double-walled carbon nanotubes. CMES Comput Model Eng Sci 104:305–327
MSC Nastran, Products (http://www.mscsoftware.com/product/msc-nastran. Accessed 20th May 2015
Tornabene F, Viola E (2009) Free vibration analysis of functionally graded panels and shells of revolution. Meccanica 44:255–281
Tornabene F, Viola E (2009) Free vibrations of four-parameter functionally graded parabolic panels and shells of revolution. Eur J Mech A Solids 28:991–1013
Tornabene F (2009) Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution. Comput Methods Appl Mech Eng 198:2911–2935
Tornabene F, Viola E, Inman DJ (2009) 2-D differential quadrature solution for vibration analysis of functionally graded conical, cylindrical shell and annular plate structures. J Sound Vib 328:259–290
Tornabene F, Liverani A, Caligiana G (2011) FGM and laminated doubly-curved shells and panels of revolution with a free-form meridian: a 2-D GDQ solution for free vibrations. Int J Mech Sci 53:446–470
Tornabene F, Ceruti A. (2013) Mixed Static and dynamic optimizazion of four-parameter functionally graded completely doubly-curved and degenerate shells and panels using GDQ method. Math Prob Eng. Article ID 867079, 1–33
Tornabene F, Fantuzzi N, Bacciocchi M (2014) Free vibrations of free-form doubly-curved shells made of functionally graded materials using higher-order equivalent single layer theories. Compos B Eng 67:490–509
Tornabene F, Viola E, Fantuzzi N (2013) General higher-order equivalent single layer theory for free vibrations of doubly-curved laminated composite shells and panels. Compos Struct 104:94–117
Tornabene F, Viola E (2013) Static analysis of functionally graded doubly-curved shells and panels of revolution. Meccanica 48:901–930
Tornabene F, Reddy JN (2013) FGM and laminated doubly-curved and degenerate shells resting on nonlinear elastic foundation: a GDQ solution for static analysis with a posteriori stress and strain recovery. J Indian Inst Sci 93:635–688
Tornabene F, Fantuzzi N, Viola E, Batra RC (2015) Stress and strain recovery for functionally graded free-form and doubly-curved sandwich shells using higher-order equivalent single layer theory. Compos Struct 119:67–89
Tornabene F, Fantuzzi N, Bacciocchi M, Viola E (2015) Accurate Inter-laminar recovery for plates and doubly-curved shells with variable radii of curvature using layer-wise theories. Compos Struct 124:368–393
Soedel W (2005) Vibration of Shells and Plates. Marcel Dekker Inc, New York
Carrera E, Brischetto S, Nali P (2011) Plates and shells for smart structures: classical and advanced theories for modeling and analysis. Wiley, New Delhi
Tornabene F, Fantuzzi N (2014) Mechanics of laminated composite doubly-curved shell structures. The generalized differential quadrature method and the strong formulation finite element method, Società Editrice Esculapio, Bologna (Italy)
Hildebrand FB, Reissner E, Thomas GB (1949) Notes on the foundations of the theory of small displacements of orthotropic shells, NACA Technical Note No. 1833, Washington
Gustafson GB. Systems of differential equations. http://www.math.utah.edu/gustafso/, Accessed 16 September 2014
Boyce WE, DiPrima RC (2001) Elementary differential equations and boundary value problems. Wiley, New York
Zwillinger D (1997) Handbook of differential equations. Academic Press, New York
Molery C, Van Loan C (2003) Nineteen dubious ways to compute the exponential of a matrix, twenty-five years later. SIAM Rev 45:1–46
Messina A. Three dimensional free vibration analysis of cross-ply laminated plates through 2D and exact models, 3rd International conference on integrity, reliability and failure, Porto (Portugal), 20–24 July 2009
Soldatos KP, Ye J (1995) Axisymmetric static and dynamic analysis of laminated hollow cylinders composed of monoclinic elastic layers. J Sound Vib 184:245–259
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Brischetto, S., Tornabene, F., Fantuzzi, N. et al. 3D exact and 2D generalized differential quadrature models for free vibration analysis of functionally graded plates and cylinders. Meccanica 51, 2059–2098 (2016). https://doi.org/10.1007/s11012-016-0361-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-016-0361-y