We study the influence of electric-spark machining of steel by rotating disk brushes in combination with the delivery of lubricoolant liquids with surface-active agents and inhibiting components of the synergistic action on the electrochemical and corrosion behavior of steel, energy costs of the process, and the protective properties of paint-and-lacquer coatings. We propose the use of galvanized brushes, which enables one to obtain Zn-protecting sites on its surface parallel with the machining of steel. This protecting sites enhance the corrosion resistance of the metal and improve the adhesive and protective properties of paint-and-lacquer coatings.
Similar content being viewed by others
References
E. M. Gutman, Mechanochemistry of Metals and Corrosion Protection [in Russian], Metallurgiya, Moscow (1981).
M. Sh. Ibragimov, M. A. Korobeinikov, and A. S. Shatskii, “Problems of the cleaning of the outer surfaces of pipelines from anticorrosive coatings,” Truboprovod. Transp. Nefti, 20–24 (2000).
Ya. M. Kolotyrkin, L. A. Yanov, and V. M. Knyazheva, “High-energy methods of surface treatment for the corrosion protection of metals,” Itogi VINITI, Korroz. Zashch. Korroz., 12, 185–258 (1986).
H. Pokhmurs’ka, V. Kalina, and Ya. Hofman, “Influence of laser hardening on the corrosion fatigue of carbon and stainless steels,” Fiz.-Khim. Mekh. Mater., Special Issue No. 1, 240–243 (2000).
L. Shevchenko, L. Zhutinskaya, V. Zelinskaya, and B. Alymov, “Technology of cleaning of the rod from scale by low-temperature plasma,” Fiz.-Khim. Mekh. Mater., Special Issue No. 3, 582–584 (2002).
M. A. Lyapunov, E. L. Uenta, and E. P. Yuora, “Electric-pulse treatment of high-strength metals and alloys,” Metallofiz. Noveish. Tekhnol., No. 4, 67–70 (2000).
L. Ya. Popilov, Electrophysical and Electrochemical Treatment of Materials [in Russian], Mashinostroenie, Moscow (1969).
Ya. V. Doroshenko, Construction of Main Pipelines [in Ukrainian], IFNTUNH, Ivano-Frankivs’k (2010).
S. V. Levchenko, S. H. Polyakov, and V. M. Ledovs’kykh, “Electrochemical aspects of the influence of surfactants on the surface of pipe steel subjected to electric-spark treatment,” Visn. Nats. Tekh. Univ. “KhPI,” No. 16, 96–99 (2005).
V. M. Ledovs’kykh and S. V. Levchenko, “Thermodynamic aspect of the development of inhibitor methods of corrosion protection of steels in aqueous salt media,” Visn. Nats. Aviats. Univ. NAU, No. 4, 126–131 (2008).
V. M. Ledovs’kykh, S. V. Levchenko, and S. M. Tulainov, “Synergistic extrema of the mixtures of corrosion inhibitors of metals in aqueous salt solutions,” Fiz.-Khim. Mekh. Mater., 49, No. 6, 107–111 (2013); English translation: Mater. Sci., 49, No. 6, 827–832 (2014).
V. M. Ledovs’kykh, S. H. Polyakov, S. V. Levchenko, and M. B. Stepanov,A Method of Treatment of Steel Surfaces [in Ukrainian], Patent of Ukraine No. 67694, Publ. on 13.03.2013, Bull. No. 12.
V. Ledovskykh, V. Vyshnevska, S. Poznyak, I. Brazhnyk, and S. Levchenko, “Inhibition mechanism analytical prediction and purposeful design of highly efficient mixed-type corrosion inhibitors,” Fiz.-Khim. Mekh. Mater., Special Issue No. 10, 416–420 (2014).
M. M. Chmyr’,V. G. Vasil’ev, and Yu. L. Kuz’min, “Systems of corrosion protection,” Neft’. Gaz. Promyshl., 23, No. 3, 13–16 (2006).
A. M. Zinevich, V. I. Glazkov, and V. G. Kotin, Protection of Pipelines and Reservoirs Against Corrosion [in Russian], Nedra, Moscow (2000).
V. M. Ledovs’kykh, S. V. Levchenko, and V. I. Skoropad, A Method for the Corrosion Protection of Steel [in Ukrainian], Patent of Ukraine No. 94182, Publ. on 10.11.2014, Bull. No. 2.
L. L. Shreir (editor), Corrosion, Butterworths, London (1977).
A. T. Sanzharovskii, Physicomechanical Properties of Polymeric and Paint-and-Lacquer Coatings [in Russian], Khimiya, Moscow (1978).
G. Champetier and H. Rabate, Chimie des Peintures, Vernis et Pigments, Tome 1, Dunod, Paris (1956).
A. Ya. Drinberg, Technology of Film-Forming Substances: Natural and Synthetic Resins, Drying Oils, and Paints [in Russian], Goskhimizdat, Moscow (1955).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 53, No. 2, pp. 109–114, March–April, 2017.
Rights and permissions
About this article
Cite this article
Ledovs’kykh, V.М., Levchenko, S.V. Electric-Spark Mechanical Method for the Preparation of Steel Surfaces by Galvanized Brushes. Mater Sci 53, 250–256 (2017). https://doi.org/10.1007/s11003-017-0069-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-017-0069-8