We consider an elastic isotropic plate reinforced by stringers and containing a rectilinear slot of variable thickness comparable with the levels of elastic strains. We study the case where the faces of the slot are in contact over a certain segment. The problem of determination of the parameters characterizing the closure of the slot is reduced to the solution of a singular integral equation, which is used to find contact stresses and the size of the contact zone.
Similar content being viewed by others
References
V. M. Tolkachev, “Transfer of load from a stringer of finite length to infinite and semiinfinite plates,” Dokl. Akad. Nauk SSSR, 154, No. 4, 86–88 (1964).
V. N. Dolgikh and L. A. Fil’shtinskii, “On a model of regular piecewise homogeneous medium,” Izv. Akad. Nauk SSSR. Mekh. Tverd. Tela, No. 2, 158–164 (1976).
G. P. Cherepanov, Fracture Mechanics of Composite Materials [in Russian], Nauka, Moscow (1983).
G. A. Vanin, Micromechanics of Composite Materials [in Russian], Naukova Dumka, Kiev (1985).
D. Broek, Elementary Engineering Fracture Mechanics, Noordhoff, Leyden (1974).
V. Z. Parton and E. M. Morozov, Mechanics of Elastoplastic Fracture [in Russian], Nauka, Moscow (1985).
G. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Nauka, Moscow (1974).
V. M. Mirsalimov and G. M. Alieva, “Contact problem for a plate with crack reinforced by stiffening ribs,” Izv. Akad. Nauk Azerb. SSR. Ser. Fiz.-Tekh. Mat. Nauk., No. 3, 53–57 (1985).
V. M. Mirsalimov, “Some problems of structural arrest of a crack,” Fiz.-Khim. Mekh. Mater., 22, No. 1, 84–88 (1986); English translation: Sov. Mater. Sci., 22, No. 1, 81–85 (1986).
V. N. Maksimenko, “Influence of riveted reinforcing ribs on the development of cracks near a hole,” Prikl. Mekh. Tech. Fiz., No. 2, 133–140 (1988).
M. P. Savruk and V. S. Kravets, “Reinforcement of a thin cracked plate by a system of parallel stringers,” Fiz.-Khim. Mekh. Mater., 30, No. 1, 96–104 (1994); English translation: Mater. Sci., 30, No. 1, 95–104 (1994).
M. P. Savruk and V. S. Kravets,’ “Two-dimensional problems of the theory of elasticity for reinforced cracked plates,” Fiz.-Khim. Mekh. Mater., 31, No. 3, 68–82 (1995); English translation: Mater. Sci., 31, No. 3, 350–362 (1995).
V. S. Kravets,’ “Effect of breaks in riveted stringers on the elastic and limiting equilibrium of a cracked plate,” Fiz.-Khim. Mekh. Mater., 35, No. 3, 39–47 (1999); English translation: Mater. Sci., 35, No. 3, 339–348 (1999).
M. V. Mir-Salim-zade, “Fracture of an isotropic medium strengthened by a regular system of stringers,” Mekh. Kompoz. Mater., 43, No. 1, 59–72 (2007).
M. V. Mir-Salim-zade, “Modeling of partial crack closure in an isotropic medium reinforced by a regular system of stringers,” Mat. Modelir., 19, No. 3, 105–115 (2007).
M. V. Mir-Salim-zade, “Modeling of partial crack closure in a perforated isotropic medium reinforced by a regular system of stringers,” Prikl. Mekh. Tech. Fiz., 51, No. 2, 148–159 (2010).
M. V. Mir-Salim-zade, “Fracture of a perforated stringer plate,” Mekh. Mashin., Mekhan. Mater., No. 4, 59–62 (2011).
N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity [in Russian], Nauka, Moscow (1966).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 52, No. 3, pp. 29–34, May–June, 2016.
Rights and permissions
About this article
Cite this article
Mir-Salim-zade, M.V. Partial Contact of the Faces of a Slot of Variable Width in a Plate Reinforced by Stringers. Mater Sci 52, 323–329 (2016). https://doi.org/10.1007/s11003-016-9960-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-016-9960-y