Abstract
Curved pipes connected to tangent terminations play an important role in process equipment design for fluid transport. These structures allow changes in flow direction and simultaneously contribute to increasing the flexibility of the entire structure. The stress analysis of curved pipes (or pipe elbows) is an essential step in the design of a piping systems project. The method of hybrid formulation of shell parameters (internal forces and displacements) is an alternative to the irreducible formulation, which deals with a totally assumed displacement field for the unknowns. The main advantage of the proposed method lies in the use of lower order formulations for the differential equations used to set-up the solution as compared with the irreducible formulation. The hybrid solution here is based on a semi-analytic formulation, where the definition of the shell forces and displacements combines analytic and trigonometric functions. Tests for the most common loading cases are analysed and results for stress distribution are discussed.
Similar content being viewed by others
References
Bathe, K.-J., Almeida, C.: A simple and effective pipe elbow element—linear analysis. Trans. ASME J. Appl. Mech. 47, 93–100 (1980)
Bathe, K.-J., Almeida, C.: A simple and effective pipe elbow element—interaction effects. Trans. ASME J. Appl. Mech. 49, 165–171 (1982a)
Bathe, K.-J., Almeida, C.: A simple and effective pipe elbow element—pressure stiffening effects. Trans. ASME J. Appl. Mech. 49, 914–916 (1982b)
Flügge, W.: Thin Elastic Shells, 2nd edn. Springer (1973)
Kitching, R.: The stress analysis of pressure vessels & pressure vessels components. In: Gill, S.S. (ed.) Smooth and Mitred Pipe Bends, chap. 7. Pergamon Press (1970)
Madureira, L., Melo, F.: A hybrid formulation in the stress analysis of curved pipes. Eng. Comput. 17(8), 970–980 (2000)
Madureira, L., Melo, F.: Stress analysis of curved pipes with hybrid formulation. Pres. Ves. Piping 81(3), 243–249 (2004)
Melo, F., Castro, P.: A reduced integration Mindlin beam element for linear-elastic stress analysis of curved pipes under generalised in-plane loading. Comput. Struct. 43(4), 787–794 (1992)
Melo, F., Castro, P.: The linear elastic stress analysis of curved pipes under generalized loads using a reduced integration finite ring element. J. Strain Anal. 32(1) (1997)
Morley, L.S.D.: Hellinger–Reissner principles for plate and shell finite elements (short communication). Int. J. Numer. Methods Eng. 20(4), 773–777 (2005)
Ory, H., Wilczek, E.: Stress and stiffness calculation of thin-walled curved pipes with realistic boundary conditions being loaded in the plane of curvature. Int. J. Pres. Ves. Piping 12, 167–189 (1983)
Othsubo, H., Watanabe, O.: Stress analysis of pipe bends by ring elements. Trans. ASME J. Appl. Mech. 100, 112–121 (1978)
Thomson, G.: Stress analysis in smooth bend pipes. PhD thesis, University of Strathclyde, Scotland (1980)
Wilczek, E.: Statische Berechnung eines Rohrkrümmers mit Realen Randbedingungen (Static analysis of curved pipes with realistic boundary conditions). PhD thesis (in German), Technischen Hochschule Aachen, Aachen (1984)
Wylie, C., Barrett, L.: Advanced Engineering Mathematics, 6th edn. McGraw-Hill (1995)
Zienkiewicz, O., Taylor, R.: The Finite Element Method, 3rd edn, vol. I and II. McGraw-Hill Co (1992)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Madureira, L.R., Melo, F.Q. A mixed formulation for stress analysis of curved pipes with tangent terminations under in-plane forces. Int J Mech Mater Des 4, 221–227 (2008). https://doi.org/10.1007/s10999-008-9074-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10999-008-9074-2