Abstract
The effect of various neodymium additions on the characteristic solidification temperatures and on the microstructure development of the laboratory-prepared binary alloy AlCu5.5 was investigated. The aluminium corner of ternary system Al–Cu with various Nd additions was investigated using thermal analysis, differential scanning calorimetry and optical and scanning electron microscopy. The presence of Nd phases was confirmed using X-ray diffractometer. Microhardness of α-Al in AlCu5.5 alloy containing various Nd additions was analysed. The results show that the addition of neodymium raises eutectic (α-Al + Al2Cu) solidification temperature and solidus temperature, which leads to a narrower solidification interval. It was also confirmed that Nd formed two binary eutectics (α-Al + Al2Cu(Nd)) and (α-Al + Al8Cu4Nd). The addition of Nd also caused the increase in microhardness of α-Al phase.
Similar content being viewed by others
References
ASM International. ASM specialty handbook, aluminium and aluminium alloys. 1993. p. 60.
Zhao J, Yuan Y, Cui F. Relationship between the Cu content and thermal properties of Al–Cu alloys for latent heat energy storage. J Therm Anal Calorim. 2017;129:109–15.
ASM International. ASM metals handbook volume 3—alloy phase diagrams. Ohio, United States; 1992. p. 82, 206.
ASM International. ASM metals handbook, volume 15—casting. Ohio, United States; 2008.
Clavaguera N, Du Y. Thermodynamic calculation of the Nd–Al system. J Phase Equilib. 1996;17:107–11.
Mondolfo LF. Aluminium alloys: structure and properties. London: Butterworth Co.; 1962.
Wang J. Thermodynamic evaluation of Al–Nd system. Pergamon, Calphad. 1996;20:135–8.
Hawksworth A, Rainforth WM, Jones H. Solidification microstructure selection in the Al-rich Al–La Al–Ce and Al–Nd systems. J Growth. 1999;197:286–96.
Cao Z, Kong G, Che C, Wang Y, Peng H. Experimental investigation of eutectic point in Al-rich Al–La, Al–Ce, Al–Pr and Al–Nd systems. J Rare Earths. 2017;35:1022–8.
Murashkin MY, Sabirov I, Medvedev AE, Enikeev NA, Lefebvre W, Valiev RZ, Sauvage X. Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE = 5.4 wt% Ce, 3.1 wt% La) alloy processed by severe plastic deformation. Mater Des. 2016;90:433–42.
Su M, Zhang J, Feng Y, Bai Y, Wang W, Zhang Z, Jiang F. Al–Nd intermetallic phase stability and its effects on mechanical properties and corrosion resistance of HPDC Mg–4Al–4Nd–0.2Mn alloy. J Alloys Compd. 2017;691:634–43.
Lu L, Raviprasad K, Lai MO. Nanostructured Mg–5%Al–x%Nd alloys. Mater Sci Eng, A. 2004;368:117–25.
Bai WM, Jiang Y, Guo ZY, Zeng LJ, Tan MY, Meggs C, Zhang LG, Liu LB, Jin ZP. Experimental and thermodynamic investigation of Al–Cu–Nd ternary system. Mater Chem Phys. 2017;195:94–104.
Wang P, Zhou L, Du Y, Xu H, Liu S, Chen L, Ouyang Y. Thermodynamic optimization of the Cu–Nd system. J Alloys Compd. 2011;509:2679–83.
Subramanian PR, Laughlin DE. The Cu–Nd (copper–neodymium) system. Bull Alloy Phase Diagr. 1988;9:362–9.
Borzone G, Parodi N, Ferro R, Bros JP, Dubes JP, Gambino M. Heat capacity and phase equilibria in rare earth alloy systems. R-rich R-alloys (R = La, Pr and Nd). J Alloys Compd. 2001;320:242–50.
Wang J, Yang J, Wu Y, Zhang H, Wang L. Microstructures and mechanical properties of as-cast Mg–5Al–0.4Mn–xNd (x = 0, 1, 2 in 4) alloys. Mater Sci Eng, A. 2008;472:332–7.
Wang J. Thermodynamic evaluation of Al–Nd system. Calphad. 1996;20:135–8.
Zou H, Zeng X, Zhai C, Ding W. Effects of Nd on the microstructure of ZA52 alloy. Mater Sci Eng, A. 2005;392:229–34.
Zhilin L, Yichun Z, Yinghong Z, Rongzhen C, Jingqi L, Xianyou W. Phase relations in the Nd-Al-Si system at 500°C. J Alloys Compd. 2001;325:190–3.
Volšak D, Vončina M, Mrvar P, Medved J. Thermodynamic characterization of an AlCu5.5BiSn alloy with various neodymium additions. Mater Technol. 2012;46:607–11.
Medved J, Vončina M, Volšak D, Mrvar P. Thermodynamic modelling of advanced aluminium alloys. In: Proceedings, 45th international October conference on mining and metallurgy—IOC. Bor, Serbia; 2013.
Volšak D, Vončina M, Mrvar P, Medved J. Thermal analysis of AlCu5.5 alloy with Nd. Program and book of abstracts, 20. jubilejna konferenca o materialih in tehnologijah, 17–19. oktober 2012, Portorož, Slovenija, p. 131.
Zhang LG. Phase diagrams and microstructure evolution of Al–Cu–RE (RE = Y, Nd, Gd, Dy, Er, Yb and Ti) Alloys, PhD thesis, Central South University, 2010.
Volšak D, Vončina M, Mrvar P, Medved J, Kiradjiiska D, Milcheva N, Patronov G, Gandova V, Vassilev G. Microstructure and thermochemical characterization of Al–Cu–Nd alloys. University of Plovdiv, 2012.
Han L, Sui Y, Wang Q, Wang K, Jiang Y. Effects of Nd on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg piston alloys. J Alloys Compd. 2017;695:1566–72.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vončina, M., Volšak, D., Petrič, M. et al. Thermodynamic characterization of aluminium corner of Al–Cu system with various Nd additions. J Therm Anal Calorim 134, 1749–1755 (2018). https://doi.org/10.1007/s10973-018-7284-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-018-7284-x