Abstract
The present research aims at developing a new quantitative thermal analysis method based on differential scanning calorimeter for determination of cristobalite phase content in ceramic cores. For this purpose, various control samples with different amounts of cristobalite phase were made based on the chemical composition of silica-based ceramic cores and analyzed via differential scanning calorimetry (DSC) technique. The surface area under the α → β cristobalite transition peak in the DSC curves was calculated via numerical integral of the peaks area, and the ratio of this area to the samples weight (A/W) was calibrated by cristobalite content of the samples. Afterward, for determining the cristobalite content of some industrial samples, the DSC patterns were plotted, and the A/W ratio of these samples was determined by the same method. Then the A/W ratios of the industrial samples were fitted on the calibration line, and the cristobalite content was derived using the equation of the calibration line. The method showed good accuracy, and the error values of the estimated cristobalite content of the industrial samples were below 2 %.
Similar content being viewed by others
References
Sachs E, Cima M, Bredt J. Intelligent design and manufacturing for prototyping. ASME PED. 1991;50:61–5.
Wereszczak AA, Breder K, Ferber MK, Kirkland TP, Payzant EA, et al. Dimensional changes and creep of silica core ceramics used in investment casting of superalloys. J Mater Sci. 2002;37:4235–45.
Kazemi A, Faghihi-Sani MA, Alizadeh HR. Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting. J Eur Ceram Soc. 2013;33:3397–402.
Ibrahim DM, Kabish AM, Sallam EH. Quantitative determination of cristobalite by thermal methods. Thermochim Acta. 1981;45:167–76.
Welberry TR, Hna GL, Withers RL. An optical transform and monte carlo study of the disorder in β-cristobalite, SiO2. J Appl Crvsr. 1989;22:87–91.
Withers RL, Thompson JG, Welberry TR. The structure and microstructure of α-cristobalite and its relationship to β-cristobalite. Phys Chem Min. 1989;16:517–22.
Hatch DM, Ghose S. The α-β phase transition in cristobalite, SiO2. Phys Chem Min. 1991;17:554–62.
Hand RJ, Stevens SJ, Sharp JH. Characterisation of fired silicas. Thermochim Acta. 1998;318:115–23.
Watson ES, O’Neill MJ, Justin J, Brenner N. A differential scanning calorimeter for quantitative differential thermal analysis. Anal Chem. 1964;36:7–13.
Sajadi SA, Khaleghian M. Study of thermal behavior of CrO3 using TG and DSC. J Therm Anal Calorim. 2014;116:915–21.
Maggio RM, Barnaba C, Cerretani L, Paciulli M, Chiavaro E. Study of the influence of triacylglycerol composition on DSC cooling curves of extra virgin olive oil by chemo-metric data processing. J Therm Anal Calorim. 2014;115:2037–44.
Barrena MI, Go´mez de Salazar JM, Pascual L, Soria A. Determination of the kinetic parameters in magnesium alloy using TEM and DSC techniques. J Therm Anal Calorim. 2013;113:713–20.
Finnie KS, Thompson G, Withers RL. Phase transitions in cristobalite and related structures studied by variable temperature infer-red emission spectroscopy. J Phys Chm Solids. 1994;55:23–9.
Hill VG, Roy R. Silica structure studies VI on tridymites. Trans Br Ceram Soc. 1958;57:496–502.
Hakvoort G, Hol CM. DSC investigation of some testing and calibration compounds, particularly during cooling. J of Therm Anal Calorim. 1998;52:195–202.
Sabatier G. Heats of transition forms, low temperature to high temperature forms of quartz, tridymite, and cristobalite. Bull Soc Fr Miner Crystallogr. 1957;80:444–50.
Majumdar AJ, McKinstrey HA, Roy R. Thermodynamic parameters for the α-β quartz and α-β cristobalite transitions. J Phys Chem Solids. 1964;25:1487–93.
Lakoday P, Eyraud C, Prettre M, Hebd CR. A contribution to the study of some polymorphic transformations of silica. Seances, Acad Sci. 1956;242:3071–77.
Acknowledgements
The authors gratefully acknowledge the MAPNA Turbine Blade Eng. & Mfg. Co. PARTO, Research and Development Department of MAPNA and PARTO for their funding, and also Mr. H. Alizade for his technical assistant.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naghizadeh, R., Kazemi, F., Arianpour, F. et al. A novel method for quantitative phase determination of cristobalite in ceramic cores using differential scanning calorimeter. J Therm Anal Calorim 119, 191–195 (2015). https://doi.org/10.1007/s10973-014-4086-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-014-4086-7