Abstract
The calorimetric measurements were applied in testing the wastes collected from different furnaces in electric power plants as materials to be used in civil engineering. The fly ash materials were collected from two power stations based on different brown coal deposits and working with conventional and fluidized bed installation. The reactivity of high calcium fly ash from sub-bituminous coal combustion has been proved in calorimetric, conductometric, chemical shrinkage, and rheological measurements before their practical implementation on larger scale. Highly soluble components of fly ash contribute to the hydration products and structure formation, followed by setting and hardening of fly ash–cement mixture. These results have been the base of research project aimed in the innovative solutions dealing with the management of deposits of wastes generated as a result of coal combustion. The standardization and potential use on larger scale of these materials, necessary from the environmental point of view, seems to be the question of nearest future.
Similar content being viewed by others
References
Manz OE. Coal fly ash: a retrospective and future look. Fuel. 1999;78:133–6.
Pandey VM, Bajrang S. Rehabilitation of coal fly ash basins. Ecol Eng. 2002;49:190–2.
Mehta PK. Pozzolanic and cementitious by-products in concrete—another look, In: Malhotra VM, editor, Proc. 3rd international conference on the use of fly ash, silica fume, slag, and natural pozzolanas in concrete, Trondheim: CANMET/ACI; 1989. p. 1–43.
Massazza F. Pozzolanic cements. Cem Concr Comp. 1993;15:185–214.
Malhotra VM, Ramezanianpour AA. Fly ash in concrete. 2nd ed. Ottawa: Canada Centre for Mineral and Energy Technology; 1994.
Brandstetr J et al. Properties and use of solid residue from fluidized bed coal combustion. In: Waste materials used in concrete manufacturing. Westwood: Noyes Publications; 1997. p. 1–52.
Giergiczny Z. The role of high calcium and siliceous fly ash in shaping the properties of cementitious building materials. In: Cracow Technical University, Cracow, editor, 2006 (in Polish).
Giergiczny Z, Gawlicki M. Rational application of fly ash in concrete. Budownictwo Technologie Architektura. 2004;4:35–8 (in Polish).
Brandt AM, et al. Application of CFBC fly ash in structural concretes. In: Polish Academy of Science, Committee of Civil Engineering, Warsaw, editor, 2010 (in Polish).
Gawlicki M, Mróz R. Properties of multifunctional high volume fluidized bed fly ash binders. In: Palomo A, Zaragoza A, editors. Cementing a sustainable future Proc. XIII international congress on the chemistry of cement. Madrid; 2011;124 (abstract).
Tsimas S, Moutsatsou-Tsima A. High-calcium fly ash as the fourth constituent in concrete: problems, solutions and perspectives. Cem Concr Comp. 2005;27:231–7.
Roszczynialski W, Nocuń-Wczelik W, Gawlicki M. Fly ash from fluidized bed coal combustion as complex cement addition. In: Malhotra VM, editor. Proc. 3rd international conference on sustainable development of cement and concrete, San Francisco; 2001. p. 415–430.
Enders M. The CaO distribution to mineral phases in a high calcium fly ash from Eastern Germany. Cem Concr Res. 1996;26:243–51.
Giergiczny Z. High calcium fly ash cements. Cement Wapno Beton. 2005;47:271–82.
Nocuń-Wczelik W, Pytel Z. Heat evolution in hydrated cementitious systems admixtured with different set controlling components. J Therm Anal Calorim. 2004;77:159–64.
Roszczynialski W, Nocuń-Wczelik W. Studies of cementitious systems with new generation by-products from fluidised bed combustion. J Therm Anal Calorim. 2004;77:151–8.
Gawlicki M, Nocuń-Wczelik W, Bąk Ł. Calorimetry in the studies of cement hydration. Setting and hardening of Portland cement–calcium aluminate cement mixtures. J Therm Anal Calorim. 2010;100:571–6.
Siler P, Kratky J, De Belie N. Isothermal and solution calorimetry to assess the effect of superplasticizers and mineral admixtures on cement hydration. J Therm Anal Calorim. 2012;107:313–20.
Pacewska B, Nowacka M, Wilińska I, Kubissa W, Antonovich V. Studies on the influence of spent FCC catalyst on hydration of calcium aluminate cements at ambient temperature. J Thermal Anal Calorim. 2011;105:129–40.
Antonovich V, Aleknevich M, Keriene J, Pundiene I, Stonys R. Investigating the hydration of deflocculated calcium aluminate cement-based binder with catalyst waste. J Therm Anal Calorim. 2012;109:537–44.
Grzeszczyk S, Lipowski G. Effect of content and particle size distribution of high-calcium fly ash on the rheological properties of cement pastes. Cem Concr Res. 1997;27:907–16.
Acknowledgements
The financial support from the “Innovative technology of some selected combustion wastes utilization - INITECH” research project (Grant No. OSF 65832) is acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nocuń-Wczelik, W., Łagosz, A., Kowalski, B. et al. Calorimetry in testing waste materials from the brown coal combustion. J Therm Anal Calorim 118, 123–131 (2014). https://doi.org/10.1007/s10973-014-3963-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-014-3963-4