Abstract
The novel two-step synthesis method decreasing the calcining temperature necessary for formation of spinel lattice and as well for reaching of bright and clear hue of the pigments prepared were investigated. This work aims to utilization of DTA for synthesis monitoring. Influence of raw materials and temperature of calcination on color properties were observed. The characterization of the samples was performed by X-ray diffraction and colorimetry in the CIE L*a*b* system. It was proved that the black spinel pigment Cu2.3Mn2.8Cr4.9Ox can be prepared at finally temperature 700°C as one-phase system with high quality black hue.
Similar content being viewed by others
References
M Trojan Z Šolc M Novotný et al. (1996) Pigments, Kirk-Othmer Encyclopedia of Chem. Technol., Vol. 19 John Wiley and Sons Inc. New York 45
DCMA – Classification and Chemical Description of the Mixed Metal Oxide Inorganic Colored Pigments, Metal Oxides and Ceramic Color, Subcommitte DCMA, 1982.
G. Buxbaum, Industrial Inorganic Pigments, Weinheim 1993.
E Ozel S Turan (2003) J. Eur. Ceram. Soc. 23 2097 Occurrence Handle10.1016/S0955-2219(03)00036-0 Occurrence Handle1:CAS:528:DC%2BD3sXktF2lu78%3D
G Yang B Han Z Sun L Yan X Wang (2002) Dyes and Pigments 55 9 Occurrence Handle10.1016/S0143-7208(02)00056-6 Occurrence Handle1:CAS:528:DC%2BD38XntVWms7s%3D
MP Gonzales-Sandoval AM Beesley M Miki-Yoshida (2004) J. Alloys Compd. 369 190 Occurrence Handle10.1016/j.jallcom.2003.09.101
J Ponce E Rios JL Rehspringer G Poillerat (1999) J. Solid State Chem. 145 23 Occurrence Handle10.1006/jssc.1999.8162 Occurrence Handle1:CAS:528:DyaK1MXkt1ektbw%3D
SC Souza IMG Santos MRS Silva MR Cassia-Santos (2005) J. Therm. Anal. Cal. 79 451 Occurrence Handle10.1007/s10973-005-0083-1 Occurrence Handle1:CAS:528:DC%2BD2MXkt1ChsLc%3D
S Roy J Ghose (1999) Mater. Res. Bull. 29 1179 Occurrence Handle10.1016/S0025-5408(99)00109-9
S Chemlal A Larbot M Persin J Sarrazin (2000) Mater. Res. Bull. 1 2515 Occurrence Handle10.1016/S0025-5408(00)00444-X
SC Souza MAF Souza SJG Lima MR Cassia-Santos (2005) J. Therm. Anal. Cal. 79 455 Occurrence Handle10.1007/s10973-005-0084-0 Occurrence Handle1:CAS:528:DC%2BD2MXkt1Chsb4%3D
Ž Mesíková P Šulcová M Trojan (2006) J. Therm. Anal. Cal. 84 733 Occurrence Handle10.1007/s10973-005-7543-5
XJ Yang ES Liu NS Chen (1998) Appl. Chem. 15 14 Occurrence Handle1:CAS:528:DyaK1cXnsFGrtL4%3D
LJ Wang CL Zhang S Li (1996) J. Inorg. Chem. 12 377
Ž Mesíkova P Šulcová M Trojan (2005) Ceramics-Silikáty 49 48
M Trojan P Šulcová D Brandová (1998) J. Therm. Anal. Cal. 53 639 Occurrence Handle10.1023/A:1010178416902 Occurrence Handle1:CAS:528:DyaK1cXns1Oms7g%3D
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bělina, P., Šulcová, P. Utilizationof dta for two-step synthesisof Cu–Mn–Cr spinel. J Therm Anal Calorim 88, 107–110 (2007). https://doi.org/10.1007/s10973-006-8100-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-006-8100-6