Abstract
Ceramic granules of PZT (Pb(Zr53,Ti47)O3) and fibers of SKN-doped PZT (1 Mol-% Sr(K0.25Nb0.75)O3 substitution in PZT) were fabricated from sol–gel precursors. The transformation of the metal–organic gel to the oxide and its crystallization behavior was investigated by thermogravitmetry, and XRD. The formation of pyrochlore or perovskite phase was sensitive to the preceeding heat treatment conditions in moist atmosphere (termed vapor thermolysis). Lower thermolysis temperatures resulted in the preferred formation of metastable pyrochlore phase. Higher thermolysis temperatures favored the formation of perovskite. Investigation of sintered materials revealed a superior sintering activity for samples with pronounced intermediate pyrochlore content whereas low-pyrochlore samples remained highly porous after sintering. For constant chemical precursors the vapour thermolysis conditions (220–280 °C) siginificantly affected crystallization and sintering behavior of the PZT and SKN-PZT material.
Similar content being viewed by others
References
Glaubitt W, Sporn D, Jahn R (1994) A new way to spinnable sols derived from modified aluminum alkoxides. J Sol-Gel Sci Technol 2:525–528
Glaubitt W, Watzka W, Scholz H, Sporn D (1997) Sol-GEL processing of functional and structural ceramic oxide fibers. J Sol-Gel Sci Technol 8:29–33
Pientschke C, Kuvatov A, Steinhausen R, Beige H, Krüger R, Müller T, Helbig U, Sporn D, Schuh C, Denneler S, Richter T, Schlich H (2009) Bipolar strain hysteresis of poled composites with Nd–Mn-doped PZT fibres. J Eur Cer Soc 29:1713–1720
Stacey MH, Taylor MD (1989) Inorganic fibers and their production, European Patent Application EP 0 318 203 A2, Imperial chemical industries PLC
Kitaoka K, Takahara K, Kozuka H, Yoko T (1999) Sol-Gel processing of transparent PLZT((Pb, La)(Zr, Ti)O3) fibers. J Sol-Gel Sci Tech 16:183–193
Hirano S-I, Yogo T, Kikuta K, Araki Y, Saitoh M, Ogasahara S (1992) Synthesis of highly oriented lead zirconate-lead titanate film using metallo-organics. J Am Ceram Soc 75:2785–2789
Pullar RC, Taylor MD, Bhattacharya AK (1998) The manufacture of Yttrium Aluminium Garnet (YAG) fibers by blow spinning from a sol-gel precursor. J Eur Ceram Soc 18:1759–1764
Pullar RC, Taylor MD, Bhattacharya AK (1999) The sintering behaviour, mechanical properties, and creep resistance of alingned polycrystalline Yttrium Aluminium Garnet (YAG) fibers, produced from aqueous sol-gel precursor. J Eur Ceram Soc 19:1747–1758
Krüger R (2002) Pyrolyse und Sinterverhalten Sol-Gel-abgeleiteter Al2O3-YAG-Fasern. Dissertation, Universität Würzburg
Krüger R, Löbmann P Atmospheric control of gel-oxide transformation in sol-gel derived Al2O3-Y2O3 fibers. J Sol-Gel Sci Technol. doi:10.1007/s10971-010-2205-x
Hansch R, Braue W, Seifert S, Sporn D, Müller G (2007) Microstructure and ferroelectric properties of soft-doped sol-gel derived PZT/SKN fibers. J Mater Sci 42:7316–7323
Polli AD, Lange FF, Levi CG (2000) Metastability of the fluorite, pyrochlore, and perovskite structures in the PbO-ZrO2-TiO2 system. J Am Ceram Soc 83:873–881
Lefevre MJ, Speck JS, Schwartz RW, Dimos D, Lockwood SJ (1996) Microstructural development in sol-gel deribed lead zirconate titanate thin films: The role of precursor stoichiometry and processing environment. J Mater Res 11:2076–2084
Polli AD, Lange FF (1995) Pyrolysis of Pb(Zr0.5Ti0.5)O3 precursors: avoiding lead partitioning. J Am Ceram Soc 78:3401–3404
Hu Y (2000) Preparation of lead zirconate titanate ceramic fibers by sol-gel method. J Sol-Gel Sci Technol 18:235–247
Park YI, Kim CE, Lee HW (1999) Effects of catalyst and solvent on PbTiO3 fibers prepared from triethanolamine complexed titanium isopropoxide. J Sol-Gel Sci Technol 14:149–162
Chen S-Y, Chen I-W (1998) Texture development, microstructure, and crystallization of chemically derived PZT thin films. J Am Ceram Soc 81:97–105
Narendar Y, Messing GL (1997) Kinetic analysis of combustion synthesis of lead magnesium niobate from metal carboxylate gels. J Am Ceram Soc 80:915–924
Narendar Y, Messing GL (1997) Mechanisms of phase separation in gel-based synthesis of multicomponent metal oxides. Catal Today 35:247–268
Yamano A, Kozuka H (2007) Effects of heat-treatment conditions on the crystallographic orientation of Pb(Zr, Ti)O3 thin films prepared by polyvinylpyrrolidone-assisted sol-gel method. J Am Ceram Soc 90:3882–3889
Norga GJ, Vasiliu F, Fe L, Wouters DJ, Van Der Biest O (2003) Role of fluorite phase formation in the texture selection of sol-gel-prepared Pb(Zr1−x, Tix)O3 films on Pt electrode layers. J Mater Res 18:1232–1238
Norga GJ, Fe L, Vasiliu F, Fompeyrine J, Locquet JP, Van der Biest O (2004) Orientation selection in functional oxide thin films. J Eur Cer Soc 24:969–974
Bursill LA, Brooks KG (1994) Crystallization of sol-gel derived lead-zirconate-titanate thin films in argon and oxygen atmospheres. J Appl Phys 75:4501–4509
Narendar Y, Messing GL (1999) Effect of phase separation in metal carboxylate gels on perovskite lead magnesium niobate crystallization. J Mater Res 14:3921–3931
Helke G, Seifert S, Cho S-J (1999) Phenomenological and structural properties of piezoelectric ceramics based on xPb(Zr, Ti)O3-(1−x)Sr(K0.25Nb0.75)O3 (PZT/SKN) solid solutions. J Eur Ceram Soc 19:1265–1268
Donnelly NJ, Shrout TR, Randall CA (2008) Properties of (1−x)PZT-xSKN ceramics sintered at low temperature using Li2CO3. J Am Ceram Soc 91(7):2182–2188
Krüger R, Glaubitt W, Löbmann P (2002) Structural evolution in sol–gel-derived yttrium aluminum garnet–alumina precursor fibers. J Am Ceram Soc 85:2827–2833
Hansch R (2003) Optimierung des PbO-Haushaltes in undotierten und SKN-substituierten PZT-Fasern: Gefüge und Eigenschaften. PhD Thesis, University Würzburg
Scherer GW (1997) Sintering of sol-gel films. J Sol-Gel Sci Technol 8:353–363
Mountjoy G, Holland MA, Gunawidjaja P, Wallidge GW, Pickup DM, Newport RJ, Smith ME (2003) Comparing the atomic structures of binary MO2-SiO2 (M = Ti, Zr, or Hf) xerogels. J Sol-Gel Sci Technol 26:161–164
Shul YG, Oh KS, Yang JC, Jung KT (1997) Effect of organic additive on the preparation of rutile TiO2 by steam treatment. J Sol-Gel Sci Technol 8:255–259
Malic B, Arcon I, Kodre A, Kosec M (1999) EXAFS study of amorphous precursors for Pb(Zr, Ti)O3 ceramics. J Sol-Gel Sci Technol 16:135–141
Almeida RM, De Barros Marques MI, Orignac X (1997) XAFS and XANES studies of silica-titania sol-gel films. J Sol-Gel Sci Technol 8:293–297
Bretos I, Jimenez R, Garcia-Lopez J, Pardo L, Calzada ML (2008) Photochemical solution deposition of lead-based ferroelectric films: avoiding the PbO-excess addition at last. Chem Mater 20:5731–5733
Carim AH, Tuttle BA, Doughty DH, Martinez SL (1991) Microstructure of solution-processed lead zirconate titanate (PZT) thin films. J Am Ceram Soc 74:1455–1458
Tuttle BA, Headley TJ, Bunker BC, Schwartz RW, Zender TJ, Hernandez CL, Goodnow DC, Tissot RJ, Michael J, Carim AH (1992) Microstructural evolution of Pb(Zr, Ti)O3 thin films prepared by hybrid metallo-organic decomposition. J Mater Res 7:1876–1882
Lee JH, Chiang YM (2001) Presure-induced pyrochlore-perovskite phase transformation in PLZST ceramics. J Electroceram 6:7–12
Acknowledgments
The authors are obliged to Silke Stöckl for performing experiments with the PZT granules and Oliver Schüßler for synthesis of the sol–gel precursors.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Krüger, R., Schmale, K. Effect of vapor thermolysis on microstructure development of sol–gel-derived lead zirconate–titanate (PZT) and PZT-Sr(K0.25Nb0.75)O3 solid solutions. J Sol-Gel Sci Technol 55, 66–72 (2010). https://doi.org/10.1007/s10971-010-2216-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-010-2216-7